Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Kondo | PMX-SCR-5204HV | Robotics |
12.0V 875.2 oz-in63.02 kg-cm6.2 N-m 11.1V 814.3 oz-in58.63 kg-cm5.8 N-m |
12.0V 0.15 s/60°400.0 deg/s66.7 RPM 11.1V 0.17 s/60°352.9 deg/s58.8 RPM |
≤3.9 A≤3900 mA | 3.32 oz94.0 g | 2.15×1.26×1.28 in 54.5×32.0×32.5 mm | (add) | Large | Aluminum | Coreless | (add) | Aluminum | (add) | (add) | Digital | (add) | 640° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | Yes | 9–12 V | (add) | (add) | ≤40°C≤104.0°F | (add) | (add) | HC-6P | 400 mm15.75 in | Japan | — | Boxed | (add) | 65,535 p/r | 362.880 | 57.6 Kbps–3 Mbps | (add) | (add) | (add) | Position, Velocity | (add) | Multi-turn | 0.021 A21 mA | (add) | (add) | ||
| Kondo | PMX-SCR-9203HV | Robotics |
12.0V 1,142.8 oz-in82.29 kg-cm8.1 N-m 11.1V 1,083.3 oz-in78.01 kg-cm7.6 N-m |
12.0V 0.14 s/60°428.6 deg/s71.4 RPM 11.1V 0.15 s/60°400.0 deg/s66.7 RPM |
≤6.1 A≤6100 mA | 3.95 oz112.0 g | 2.15×1.26×1.56 in 54.5×32.0×39.5 mm | (add) | Large | Aluminum | Coreless | (add) | Aluminum | (add) | (add) | Digital | (add) | 640° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | Yes | 9–12 V | (add) | (add) | ≤40°C≤104.0°F | (add) | (add) | HC-6P | 400 mm15.75 in | Japan | — | Boxed | (add) | 65,535 p/r | 237.600 | 57.6 Kbps–3 Mbps | (add) | (add) | (add) | Position, Velocity | (add) | Multi-turn | 0.028 A28 mA | (add) | (add) | ||
| Kondo | PMX-SCR-9204HV | Robotics |
12.0V 1,379.3 oz-in99.32 kg-cm9.7 N-m 11.1V 1,261.8 oz-in90.86 kg-cm8.9 N-m |
12.0V 0.21 s/60°285.7 deg/s47.6 RPM 11.1V 0.23 s/60°260.9 deg/s43.5 RPM |
≤6.1 A≤6100 mA | 3.95 oz112.0 g | 2.15×1.26×1.56 in 54.5×32.0×39.5 mm | (add) | Large | Aluminum | Coreless | (add) | Aluminum | (add) | (add) | Digital | (add) | 640° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | Yes | 9–12 V | (add) | (add) | ≤40°C≤104.0°F | (add) | (add) | HC-6P | 400 mm15.75 in | Japan | — | Boxed | (add) | 65,535 p/r | 362.880 | 57.6 Kbps–3 Mbps | (add) | (add) | (add) | Position, Velocity | (add) | Multi-turn | 0.028 A28 mA | (add) | (add) | ||
| Kpower | DHV090 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 240 mm9.45 in | (add) | 1.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV150 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.36 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV200 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.19 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV300 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.12 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV813 | Hobby | 7.4V 125.0 oz-in9.00 kg-cm0.9 N-m | 7.4V 0.09 s/60°666.7 deg/s111.1 RPM | ≤2.5 A≤2500 mA | 1.02 oz29.0 g | 1.18×0.39×1.38 in 30.0×9.9×35.1 mm | — | Micro | Aluminum | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | 3 µs | (add) | Potentiometer | PWM | TTL | RS485 | (add) | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | IP42 | (add) | (add) | 185 mm7.28 in | China | 2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.006 A6 mA | 0.500° | — | ||
| Kpower | DHV816 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.10 s/60°600.0 deg/s100.0 RPM | ≤2 A≤2000 mA | 1.06 oz30.0 g | 1.34×0.59×1.10 in 34.0×15.0×27.9 mm | — | Mini | Aluminum | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | PWM | UART-TTL | RS-485 | (add) | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | IP42 | (add) | (add) | (add) | (add) | 1.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV817 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM | (add) | 1.06 oz30.0 g | 1.34×0.59×1.10 in 34.0×15.0×27.9 mm | — | Mini | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV821 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 2.38 oz67.5 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.17 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV823 | Hobby | 7.4V 102.8 oz-in7.40 kg-cm0.7 N-m | 7.4V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 2.38 oz67.5 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.11 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV826 | Hobby |
7.4V 102.8 oz-in7.40 kg-cm0.7 N-m 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.10–1.58 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DHV828 | Hobby |
7.4V 102.8 oz-in7.40 kg-cm0.7 N-m 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
7.4V 0.16 s/60°375.0 deg/s62.5 RPM 6.0V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | (add) | Dual Bearings | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | TTL | (add) | 9–13 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.86–1.19 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Kpower | DHV840 | Hobby | 7.4V 555.5 oz-in40.00 kg-cm3.9 N-m | 7.4V 0.16 s/60°375.0 deg/s62.5 RPM | ≤5 A≤5000 mA | 2.66 oz75.5 g | 1.57×0.79×1.69 in 39.9×20.1×42.9 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | 330 Hz | Potentiometer | (add) | (add) | 4.8–7.4 V | (add) | (add) | -10–50°C14.0–122.0°F | (add) | (add) | (add) | (add) | China | 6.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM0090 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 0.46 oz13.0 g | 0.88×0.49×0.91 in 22.4×12.4×23.1 mm | — | Micro | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.93 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM0170 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 0.74 oz21.0 g | 1.10×0.51×1.06 in 27.9×13.0×26.9 mm | — | Mini | (add) | DC | (add) | Metal | (add) | Bushing | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM0200 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.74 oz21.0 g | 1.22×0.65×1.12 in 31.0×16.5×28.4 mm | — | Mini | (add) | DC | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.28 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM0260 | Hobby |
6.0V 55.6 oz-in4.00 kg-cm0.4 N-m 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.99 oz28.0 g | 1.40×0.59×1.14 in 35.6×15.0×29.0 mm | — | Mini | Plastic | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.71–0.86 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM0900 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 2.12 oz60.0 g | 1.57×0.78×1.48 in 39.9×19.8×37.6 mm | — | Standard | (add) | DC | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM1500 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 2.12 oz60.0 g | 1.57×0.79×1.48 in 39.9×20.1×37.6 mm | — | Standard | (add) | DC | (add) | Metal | (add) | (add) | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.03 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DM4000 | Hobby |
8.4V 750.1 oz-in54.01 kg-cm5.3 N-m 7.4V 694.5 oz-in50.01 kg-cm4.9 N-m 6.0V 583.4 oz-in42.01 kg-cm4.1 N-m |
8.4V 0.12 s/60°521.7 deg/s87.0 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.16 s/60°387.1 deg/s64.5 RPM |
(add) | 5.15 oz146.0 g | 2.59×1.18×2.26 in 65.8×30.0×57.4 mm | — | Giant | Plastic | DC | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 6.96–12.06 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DMB009 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.44 oz12.5 g | 0.88×0.49×0.90 in 22.4×12.4×22.9 mm | — | Micro | Plastic | DC | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.71 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DMC027 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 1.01 oz28.5 g | 1.42×0.59×1.14 in 36.1×15.0×29.0 mm | — | Mini | Aluminum | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.93 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kpower | DMC090 | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 2.29 oz65.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.71 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Kondo
Stall Current: ≤3.9 A≤3900 mA
Shaft Power: —
Weight: 3.32 oz94.0 g
Size Class: Large
Diameter: —
Dimensions: 2.15×1.26×1.28 in 54.5×32.0×32.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 640°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 9–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤40°C≤104.0°F
Water Rating: (add)
Certification: (add)
Connector: HC-6P
Wire Length: 400 mm15.75 in
Country of Origin: Japan
Shape: Boxed
Shaft Size: —
Resolution: 65,535 p/r
Gear Ratio: 362.880
Baud Rate: 57.6 Kbps–3 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: Kondo
Stall Current: ≤6.1 A≤6100 mA
Shaft Power: —
Weight: 3.95 oz112.0 g
Size Class: Large
Diameter: —
Dimensions: 2.15×1.26×1.56 in 54.5×32.0×39.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 640°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 9–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤40°C≤104.0°F
Water Rating: (add)
Certification: (add)
Connector: HC-6P
Wire Length: 400 mm15.75 in
Country of Origin: Japan
Shape: Boxed
Shaft Size: —
Resolution: 65,535 p/r
Gear Ratio: 237.600
Baud Rate: 57.6 Kbps–3 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: Kondo
Stall Current: ≤6.1 A≤6100 mA
Shaft Power: —
Weight: 3.95 oz112.0 g
Size Class: Large
Diameter: —
Dimensions: 2.15×1.26×1.56 in 54.5×32.0×39.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 640°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 9–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤40°C≤104.0°F
Water Rating: (add)
Certification: (add)
Connector: HC-6P
Wire Length: 400 mm15.75 in
Country of Origin: Japan
Shape: Boxed
Shaft Size: —
Resolution: 65,535 p/r
Gear Ratio: 362.880
Baud Rate: 57.6 Kbps–3 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: Kpower
Stall Current: (add)
Shaft Power: 1.90 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.36 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.19 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.12 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: ≤2.5 A≤2500 mA
Shaft Power: 2.57 W
Weight: 1.02 oz29.0 g
Size Class: Micro
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×9.9×35.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM | TTL | RS485
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP42
Certification: (add)
Connector: (add)
Wire Length: 185 mm7.28 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: ≤2 A≤2000 mA
Shaft Power: 1.90 W
Weight: 1.06 oz30.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.34×0.59×1.10 in 34.0×15.0×27.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM | UART-TTL | RS-485
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP42
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 3.80 W
Weight: 1.06 oz30.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.34×0.59×1.10 in 34.0×15.0×27.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 3.17 W
Weight: 2.38 oz67.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 2.11 W
Weight: 2.38 oz67.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.10–1.58 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 0.86–1.19 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: TTL
Programmable: (add)
Op. Voltage: 9–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: ≤5 A≤5000 mA
Shaft Power: 6.42 W
Weight: 2.66 oz75.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.69 in 39.9×20.1×42.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.93 W
Weight: 0.46 oz13.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.88×0.49×0.91 in 22.4×12.4×23.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 0.91 W
Weight: 0.74 oz21.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.10×0.51×1.06 in 27.9×13.0×26.9 mm
Case Material: (add)
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.28 W
Weight: 0.74 oz21.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.22×0.65×1.12 in 31.0×16.5×28.4 mm
Case Material: (add)
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 0.71–0.86 W
Weight: 0.99 oz28.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.14 in 35.6×15.0×29.0 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 0.81 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.48 in 39.9×19.8×37.6 mm
Case Material: (add)
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.03 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 39.9×20.1×37.6 mm
Case Material: (add)
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 6.96–12.06 W
Weight: 5.15 oz146.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.59×1.18×2.26 in 65.8×30.0×57.4 mm
Case Material: Plastic
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.71 W
Weight: 0.44 oz12.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.88×0.49×0.90 in 22.4×12.4×22.9 mm
Case Material: Plastic
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.93 W
Weight: 1.01 oz28.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.14 in 36.1×15.0×29.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kpower
Stall Current: (add)
Shaft Power: 1.71 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.