Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Futaba | S9470SV * | Hobby |
7.4V 191.7 oz-in13.80 kg-cm1.4 N-m 6.0V 158.4 oz-in11.41 kg-cm1.1 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.90 oz54.0 g | 1.575×0.787×1.441 in 40.0×20.0×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS | SBUS2 | Yes | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 2.66–3.94 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| G&P Sales | PPP * | Hobby |
6.0V 208.0 oz-in14.98 kg-cm1.5 N-m 4.8V 180.0 oz-in12.96 kg-cm1.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.78 oz50.5 g | 1.60×0.80×1.50 in 40.6×20.3×38.1 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.96–2.96 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Gaui | GS-504 * | Hobby |
6.0V 25.0 oz-in1.80 kg-cm0.2 N-m 4.8V 30.6 oz-in2.20 kg-cm0.2 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
2.2–2.5 A2200–2500 mA | 2.08 oz59.0 g | 1.57×0.77×1.44 in 39.9×19.6×36.6 mm | — | Unknown | Aluminum | Brushless | (add) | (add) | (add) | Dual Bearings | Digital | (add) | 180° | (add) | 2.5 ms | (add) | 1520 µs | (add) | 400 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | -10–70°C14.0–158.0°F | (add) | (add) | (add) | (add) | Taiwan | 0.33–0.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS892 | Hobby |
8.4V 361.1 oz-in26.00 kg-cm2.6 N-m 7.4V 319.5 oz-in23.00 kg-cm2.3 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.72 oz77.0 g | 1.59×0.83×1.54 in 40.4×21.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal / Steel | 25 | (add) | Digital | (add) | (add) | (add) | 3.003 ms | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.62–9.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS893 | Hobby |
8.4V 500.0 oz-in36.01 kg-cm3.5 N-m 7.4V 458.4 oz-in33.01 kg-cm3.2 N-m 6.0V 388.9 oz-in28.01 kg-cm2.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.82 oz80.0 g | 1.59×0.787×1.476 in 40.4×20.0×37.5 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.14–9.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS895 | Hobby |
8.4V 173.6 oz-in12.50 kg-cm1.2 N-m 7.4V 152.8 oz-in11.00 kg-cm1.1 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | 3.003 ms | (add) | 760 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.14–10.70 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS995 | Hobby |
8.4V 152.8 oz-in11.00 kg-cm1.1 N-m 7.4V 132.0 oz-in9.50 kg-cm0.9 N-m 6.0V 111.1 oz-in8.00 kg-cm0.8 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.72 oz77.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Metal | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.11–9.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS945MG | Hobby |
8.4V 694.5 oz-in50.01 kg-cm4.9 N-m 7.4V 638.9 oz-in46.01 kg-cm4.5 N-m 6.0V 555.6 oz-in40.01 kg-cm3.9 N-m |
8.4V 0.15 s/60°400.0 deg/s66.7 RPM 7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 3.10 oz88.0 g | 1.59×0.791×1.52 in 40.4×20.1×38.6 mm | — | Standard | Metal | Coreless | (add) | Steel | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | IP67 | (add) | (add) | (add) | China | 5.14–8.56 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G28 | Hobby | 12.0V 388.9 oz-in28.01 kg-cm2.7 N-m | 12.0V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 2.82 oz80.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | 2.5 ms | 450–1050 µs | 760 µs | (add) | 400 Hz | (add) | (add) | (add) | 12–12 V | Direct | (add) | (add) | (add) | (add) | (add) | (add) | China | 11.99 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G45 | Hobby | 12.8V 625.1 oz-in45.01 kg-cm4.4 N-m | 12.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 2.75 oz78.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 12.84 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G92 | Hobby |
8.4V 597.3 oz-in43.01 kg-cm4.2 N-m 7.4V 527.8 oz-in38.01 kg-cm3.7 N-m 6.0V 430.6 oz-in31.01 kg-cm3.0 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.13 s/60°480.0 deg/s80.0 RPM |
(add) | 2.72 oz77.0 g | 1.57×0.79×1.48 in 39.9×20.1×37.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | 3.003 ms | (add) | 1520 µs | 2 µs | 333 Hz | Potentiometer | (add) | (add) | 4.8–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 330 mm12.99 in | China | 6.37–12.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G95 | Hobby |
8.4V 347.3 oz-in25.00 kg-cm2.5 N-m 7.4V 305.6 oz-in22.00 kg-cm2.2 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.75 oz78.0 g | 2.17×0.79×1.48 in 55.1×20.1×37.6 mm | — | Standard | Metal | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.78–10.70 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | IPX896 | Hobby |
8.4V 500.0 oz-in36.01 kg-cm3.5 N-m 7.4V 458.4 oz-in33.01 kg-cm3.2 N-m 6.0V 388.9 oz-in28.01 kg-cm2.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 3.10 oz88.0 g | 1.59×0.83×1.44 in 40.4×21.1×36.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | Potentiometer | (add) | (add) | 4.8–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | IPX8 | (add) | (add) | 380 mm14.96 in | China | 5.14–9.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Gearwurx | Torxis Servo | Robotics |
12.0V 3,200.0 oz-in230.42 kg-cm22.6 N-m 6.0V 1,600.0 oz-in115.21 kg-cm11.3 N-m |
12.0V 1.00 s/60°60.0 deg/s10.0 RPM | (add) | 35.27 oz1,000.0 g | 5.50×2.40×4.66 in 139.7×61.0×118.4 mm | (add) | Giant | Aluminum | DC | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 90° | 270 | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 10–14 V | Direct | Direct | (add) | (add) | (add) | JR (Universal) | 356 mm14.00 in | (add) | 5.92 W | Boxed | 9.5 mm | (add) | 1044.000 | (add) | (add) | (add) | (add) | Position, Velocity | 3.000 A @ 12.0V3,000 mA @ 12.0V | Positional | (add) | (add) | 5V | ||
| GoBilda | 2000-0025-0002 | Robotics |
7.4V 350.0 oz-in25.20 kg-cm2.5 N-m 6.0V 300.0 oz-in21.60 kg-cm2.1 N-m 4.8V 240.0 oz-in17.28 kg-cm1.7 N-m |
7.4V 0.16 s/60°375.0 deg/s62.5 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
2–3 A2000–3000 mA | 2.12 oz60.0 g | 1.575×0.787×1.571 in 40.0×20.0×39.9 mm | (add) | Standard | Plastic | Brushed | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 300° | 300 | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM, SerialBUS | Yes | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 1.78–4.04 W | Boxed | 6.0 mm | (add) | 300.000 | (add) | 2.8 W | (add) | (add) | Position, Continuous Rotation | 0.200 A @ 7.4V200 mA @ 7.4V | (add) | 0.150 A150 mA | (add) | 3-5V | ||
| GoBilda | 2000-0025-0003 | Robotics |
7.4V 150.0 oz-in10.80 kg-cm1.1 N-m 6.0V 130.0 oz-in9.36 kg-cm0.9 N-m 4.8V 110.0 oz-in7.92 kg-cm0.8 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
2–3 A2000–3000 mA | 2.05 oz58.0 g | 1.575×0.787×1.571 in 40.0×20.0×39.9 mm | (add) | Standard | Plastic | Brushed | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 300° | 300 | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM, SerialBUS | Yes | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 1.85–3.96 W | Boxed | 6.0 mm | 1,000,000 p/r | 135.000 | (add) | 2.7 W | (add) | (add) | Position, Continuous | 0.230 A @ 7.4V230 mA @ 7.4V | (add) | 0.230 A230 mA | (add) | 3-5V | ||
| GoBilda | 2000-0025-0004 | Robotics |
7.4V 75.0 oz-in5.40 kg-cm0.5 N-m 6.0V 65.3 oz-in4.70 kg-cm0.5 N-m 4.8V 55.6 oz-in4.00 kg-cm0.4 N-m |
7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,395.3 deg/s232.6 RPM 4.8V 0.06 s/60°1,090.9 deg/s181.8 RPM |
2–3 A2000–3000 mA | 2.05 oz58.0 g | 1.575×0.787×1.571 in 40.0×20.0×39.9 mm | (add) | Standard | Plastic | Brushed | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 300° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM, SerialBUS | Yes | 4.8–7.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 1.87–3.96 W | Boxed | 6.0 mm | (add) | 67.000 | (add) | 2.8 W | (add) | (add) | Default, Continuous | 0.230 A @ 7.4V230 mA @ 7.4V | (add) | 0.190 A190 mA | (add) | 3-5V | ||
| GoBilda | 2000-0025-0502 | Robotics |
7.4V 350.0 oz-in25.20 kg-cm2.5 N-m 6.0V 300.0 oz-in21.60 kg-cm2.1 N-m 4.8V 240.0 oz-in17.28 kg-cm1.7 N-m |
7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
2–3 A2000–3000 mA | 2.26 oz64.0 g | 1.575×0.787×1.571 in 40.0×20.0×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 1800° | (add) | 20 ms | 700–2300 µs | (add) | 4 µs | (add) | Potentiometer | PWM, SerialBUS | Yes | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 1.78–3.81 W | Boxed | (add) | (add) | 300.000 | (add) | (add) | (add) | (add) | Position, Continuous Rotation | 0.230 A @ 7.4V230 mA @ 7.4V | Multi-turn | 0.200 A200 mA | (add) | 3-5V | ||
| GoBilda | 2000-0025-0503 | Robotics |
7.4V 150.0 oz-in10.80 kg-cm1.1 N-m 6.0V 130.0 oz-in9.36 kg-cm0.9 N-m 4.8V 110.0 oz-in7.92 kg-cm0.8 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
2–3 A2000–3000 mA | 2.12 oz60.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | (add) | Standard | Plastic | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 1800° | (add) | 20 ms | 700–2300 µs | (add) | 4 µs | 50 Hz | Potentiometer | PWM, SerialBUS | Yes | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 1.85–3.96 W | Boxed | 6.0 mm | (add) | 135.000 | (add) | (add) | (add) | (add) | Default, Continuous | 0.230 A @ 7.4V230 mA @ 7.4V | Multi-turn | (add) | (add) | 3-5V | ||
| GoBilda | 2000-0025-0504 | Robotics |
7.4V 75.0 oz-in5.40 kg-cm0.5 N-m 6.0V 65.0 oz-in4.68 kg-cm0.5 N-m 4.8V 55.0 oz-in3.96 kg-cm0.4 N-m |
7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,395.3 deg/s232.6 RPM 4.8V 0.06 s/60°1,090.9 deg/s181.8 RPM |
2–3 A2000–3000 mA | 2.05 oz58.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | (add) | Standard | (add) | Brushed | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 1800° | (add) | 20 ms | 700–2300 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM, SerialBUS | Yes | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 1.85–3.96 W | Boxed | (add) | (add) | 67.000 | (add) | (add) | (add) | (add) | Default, Continuous | 0.230 A @ 7.4V230 mA @ 7.4V | Multi-turn | (add) | (add) | 3-5V | ||
| GoBilda | 2002-0180-0002 | Robotics |
6.0V 75.0 oz-in5.40 kg-cm0.5 N-m 4.8V 65.0 oz-in4.68 kg-cm0.5 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
0.8–1 A800–1000 mA | 1.83 oz52.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | (add) | Standard | (add) | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 180° | (add) | (add) | 600–2400 µs | (add) | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | 0.57–0.73 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.090 A @ 6.0V90 mA @ 6.0V | Positional | 0.090 A90 mA | (add) | 3-5V | ||
| GoBilda | 2002-0180-0003 | Robotics |
6.0V 2.9 oz-in0.21 kg-cm0.0 N-m 4.8V 2.2 oz-in0.16 kg-cm0.0 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
0.8–1 A800–1000 mA | 1.83 oz52.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | (add) | Standard | (add) | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Clockwise | 180° | (add) | (add) | 600–2400 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | TJC8 | 300 mm11.81 in | (add) | — | Boxed | 6.0 mm | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.090 A @ 6.0V90 mA @ 6.0V | (add) | 0.090 A90 mA | (add) | 5V | ||
| GoTeck RC | BL2511SG | Hobby |
6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.07 s/60°810.8 deg/s135.1 RPM 4.8V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | 2.19 oz62.0 g | 1.61×0.80×1.03 in 40.9×20.3×26.2 mm | — | Low Profile | Aluminum | Brushless | FET | Metal | (add) | Dual Bearings | Digital | Counterclockwise | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.02–4.16 W | Boxed | (add) | — | — | — | — | — | — | — | 3.000 A @ 6.0V3,000 mA @ 6.0V | Standard | (add) | — | — | ||
| GoTeck RC | DC1611SG | Hobby |
6.0V 305.5 oz-in22.00 kg-cm2.2 N-m 4.8V 277.7 oz-in20.00 kg-cm2.0 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°368.1 deg/s61.3 RPM |
(add) | 1.87 oz53.0 g | 1.57×0.79×1.46 in 39.9×20.1×37.1 mm | — | Standard | Nylon / Aluminum | Coreless | FET | Steel | (add) | Dual Bearings | Digital | Counterclockwise | 55° | (add) | (add) | 1500–2100 µs | 1500 µs | 1 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.15–4.03 W | Boxed | (add) | — | — | — | — | — | — | — | 3.400 A @ 6.0V3,400 mA @ 6.0V | Positional | 0.400 A400 mA | — | — | ||
| GoTeck RC | DC1612SG | Hobby |
6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.87 oz53.0 g | 1.57×0.79×1.46 in 39.9×20.1×37.1 mm | — | Standard | Plastic | Coreless | FET | Titanium | (add) | Dual Bearings | Digital | Counterclockwise | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 2.85–4.40 W | Boxed | (add) | — | — | — | — | — | — | — | 3.400 A @ 6.0V3,400 mA @ 6.0V | Standard | (add) | — | — | ||
Make: Futaba
Stall Current: (add)
Shaft Power: 2.66–3.94 W
Weight: 1.90 oz54.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.441 in 40.0×20.0×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS | SBUS2
Programmable: Yes
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: G&P Sales
Stall Current: (add)
Shaft Power: 1.96–2.96 W
Weight: 1.78 oz50.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.80×1.50 in 40.6×20.3×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Gaui
Stall Current: 2.2–2.5 A2200–2500 mA
Shaft Power: 0.33–0.51 W
Weight: 2.08 oz59.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.57×0.77×1.44 in 39.9×19.6×36.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 2.5 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–70°C14.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Taiwan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 4.62–9.54 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.54 in 40.4×21.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal / Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–9.25 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.787×1.476 in 40.4×20.0×37.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–10.70 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 4.11–9.42 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–8.56 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.791×1.52 in 40.4×20.1×38.6 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 11.99 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 2.5 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 12–12 V
Power Source: Direct
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 12.84 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 6.37–12.27 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 39.9×20.1×37.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 330 mm12.99 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.78–10.70 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 2.17×0.79×1.48 in 55.1×20.1×37.6 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–9.25 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.44 in 40.4×21.1×36.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IPX8
Certification: (add)
Connector: (add)
Wire Length: 380 mm14.96 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Gearwurx
Stall Current: (add)
Shaft Power: 5.92 W
Weight: 35.27 oz1,000.0 g
Size Class: Giant
Diameter: —
Dimensions: 5.50×2.40×4.66 in 139.7×61.0×118.4 mm
Case Material: Aluminum
Motor Type: DC
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: 270
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 10–14 V
Power Source: Direct
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 356 mm14.00 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 9.5 mm
Resolution: —
Gear Ratio: 1044.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: GoBilda
Stall Current: 2–3 A2000–3000 mA
Shaft Power: 1.78–4.04 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.571 in 40.0×20.0×39.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 300°
Mech. Limit: 300
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM, SerialBUS
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: 300.000
Baud Rate: —
Output Power: 2.8 W
Radial Load: —
MCU: —
Operating Modes: Position, Continuous Rotation
Make: GoBilda
Stall Current: 2–3 A2000–3000 mA
Shaft Power: 1.85–3.96 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.571 in 40.0×20.0×39.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 300°
Mech. Limit: 300
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM, SerialBUS
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 6.0 mm
Resolution: 1,000,000 p/r
Gear Ratio: 135.000
Baud Rate: —
Output Power: 2.7 W
Radial Load: —
MCU: —
Operating Modes: Position, Continuous
Make: GoBilda
Stall Current: 2–3 A2000–3000 mA
Shaft Power: 1.87–3.96 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.571 in 40.0×20.0×39.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 300°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM, SerialBUS
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: 67.000
Baud Rate: —
Output Power: 2.8 W
Radial Load: —
MCU: —
Operating Modes: Default, Continuous
Make: GoBilda
Stall Current: 2–3 A2000–3000 mA
Shaft Power: 1.78–3.81 W
Weight: 2.26 oz64.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.571 in 40.0×20.0×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 1800°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 700–2300 µs
Neutral Pos.: (add)
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM, SerialBUS
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 300.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Continuous Rotation
Make: GoBilda
Stall Current: 2–3 A2000–3000 mA
Shaft Power: 1.85–3.96 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 1800°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 700–2300 µs
Neutral Pos.: (add)
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM, SerialBUS
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: 135.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Default, Continuous
Make: GoBilda
Stall Current: 2–3 A2000–3000 mA
Shaft Power: 1.85–3.96 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 1800°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 700–2300 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM, SerialBUS
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 67.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Default, Continuous
Make: GoBilda
Stall Current: 0.8–1 A800–1000 mA
Shaft Power: 0.57–0.73 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 600–2400 µs
Neutral Pos.: (add)
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GoBilda
Stall Current: 0.8–1 A800–1000 mA
Shaft Power: —
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 600–2400 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: TJC8
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GoTeck RC
Stall Current: (add)
Shaft Power: 3.02–4.16 W
Weight: 2.19 oz62.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.80×1.03 in 40.9×20.3×26.2 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GoTeck RC
Stall Current: (add)
Shaft Power: 3.15–4.03 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.46 in 39.9×20.1×37.1 mm
Case Material: Nylon / Aluminum
Motor Type: Coreless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 55°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GoTeck RC
Stall Current: (add)
Shaft Power: 2.85–4.40 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.46 in 39.9×20.1×37.1 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: FET
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.