Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-22
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 2000-0025-0002 |
| Category | Robotics |
| Performance | |
| Torque |
7.4V
350.00 oz-in
25.20 kg-cm
2.5 N-m
6.0V
300.00 oz-in
21.60 kg-cm
2.1 N-m
4.8V
240.00 oz-in
17.28 kg-cm
1.7 N-m
Average
|
| Speed |
7.4V
0.16 sec/60°
375.0 deg/s
62.5 RPM
6.0V
0.20 sec/60°
300.0 deg/s
50.0 RPM
4.8V
0.25 sec/60°
240.0 deg/s
40.0 RPM
Bottom 10%
|
| Running Current |
7.4V
0.200 A
200 mA
6.0V
0.160 A
160 mA
4.8V
0.150 A
150 mA
Above Average
|
| Stall Current | 2–3 A2000–3000 mAAverage |
| Rated Output Power | 2.8 W |
| Physical | |
| Weight | 2.12 oz60.0 gAverage |
| Shape | Boxed |
| Dimensions |
L 1.575 in W 0.787 in H 1.571 in L 40.0 mm W 20.0 mm H 39.9 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | Brushed |
| Gears | Steel |
| Gear Ratio | 300:1 |
| Gear Spline/Teeth | 25 T |
| Shaft Size | 6.00 mm |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Clockwise |
| Rotational Range | 300° |
| Mechanical Limit | 300° |
| Pulse Cycle | 20 ms |
| Pulse Width | 500-2500 µs |
| Neutral Position | 1500 µs |
| Dead Band | 4 µs |
| Refresh Rate | 50 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM, SerialBUS |
| Programmable | Yes |
| Operating Modes | Position, Continuous Rotation |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 4.8–7.4 V |
| Idle Current | 0.150 A150 mA |
| Connectivity | |
| Connector | TJC8 |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Average Stronger than 56% of 1059 Digital Standard servos at 4.8V |
| Speed | Bottom 10% Faster than 1% of 1044 Digital Standard servos at 4.8V |
| Weight | Average Lighter than 60% of 1879 Digital Standard servos |
| Running Current | Above Average Lower draw than 67% of 226 Digital Standard servos at 4.8V |
| Stall Current | Average Lower draw than 54% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 1.78–4.04 W |
| Power Density | 2.077 W/in³ More power-dense than 46% of 1767 Digital Standard servos |
| Torque Density | 4.0000 oz-in/g Stronger than 60% of 1052 Digital Standard servos |
| Torque-to-Volume Ratio | 123.25 oz-in/in³ Denser torque than 54% of 1057 Digital Standard servos |
| Speed-to-Weight | 0.06667 (1/sec·g) Faster than 5% of 1037 Digital Standard servos |
| Speed-Torque Trade-off | 60.00 Better balanced than 85% of 1033 Digital Standard servos |
| Current-per-Torque Ratio | 0.0125 A/oz-in More efficient than 62% of 331 Digital Standard servos |
| Idle-to-Running Current Ratio | 1.000 Lower idle draw than 6% of 167 Digital Standard servos |
| No-Load vs Stall Current Spread | 20.00 Narrower current spread than 44% of 179 Digital Standard servos |
| Torque Gain per Volt | 17.63%/V More voltage-responsive (torque) than 66% of 872 Digital Standard servos |
| Speed Gain per Volt | 21.63%/V More voltage-responsive (speed) than 85% of 873 Digital Standard servos |
| Voltage Range Width | 2.6 V Wider voltage range than 63% of 1559 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0020 Finer dead band than 19% of 504 Digital Standard servos |
Notes
High-torque digital servo featuring a steel gear train and dual modes (300° positioning and continuous rotation). It includes a 25-tooth spline and support for 4.8V to 7.4V operation.
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are very few reviews for this servo on the web. A Reddit user calls the dual-mode servo unusual and says the programmer that switches it between standard and continuous operation is very straightforward.
Be the first to review!