Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-10
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 2000-0025-0003 |
| Category | Robotics |
| Performance | |
| Torque |
7.4V
150.00 oz-in
10.80 kg-cm
1.1 N-m
6.0V
130.00 oz-in
9.36 kg-cm
0.9 N-m
4.8V
110.00 oz-in
7.92 kg-cm
0.8 N-m
Below Average
|
| Speed |
7.4V
0.07 sec/60°
857.1 deg/s
142.9 RPM
6.0V
0.09 sec/60°
666.7 deg/s
111.1 RPM
4.8V
0.11 sec/60°
545.5 deg/s
90.9 RPM
Above Average
|
| Running Current |
7.4V
0.230 A
230 mA
6.0V
0.200 A
200 mA
4.8V
0.190 A
190 mA
Average
|
| Stall Current | 2–3 A2000–3000 mAAverage |
| Rated Output Power | 2.7 W |
| Physical | |
| Weight | 2.05 oz58.0 gAverage |
| Shape | Boxed |
| Dimensions |
L 1.575 in W 0.787 in H 1.571 in L 40.0 mm W 20.0 mm H 39.9 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | Cored |
| Gears | Steel |
| Gear Ratio | 135:1 |
| Gear Spline/Teeth | 25 T |
| Shaft Size | 6.0 mm |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Clockwise |
| Rotational Range | 300° |
| Mechanical Limit | 300° |
| Pulse Cycle | 20 ms |
| Pulse Width | 500-2500 µs |
| Neutral Position | 1500 µs |
| Dead Band | 4 µs |
| Refresh Rate | 50 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM, SerialBUS |
| Programmable | Yes |
| Resolution | 1,000,000 pulse/rev |
| Operating Modes | Position, Continuous |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 4.8–7.4 V |
| Idle Current | 0.230 A230 mA |
| Connectivity | |
| Connector | TJC8 |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Below Average Stronger than 20% of 1044 Digital Standard servos at 4.8V |
| Speed | Above Average Faster than 67% of 1039 Digital Standard servos at 4.8V |
| Weight | Average Lighter than 64% of 1907 Digital Standard servos |
| Running Current | Average Lower draw than 59% of 185 Digital Standard servos at 4.8V |
| Stall Current | Average Lower draw than 55% of 553 Digital Standard servos |
Performance Analysis
| Shaft Power | 1.85–3.96 W |
| Power Density | 2.035 W/in³ More power-dense than 45% of 1765 Digital Standard servos |
| Torque Density | 1.8966 oz-in/g Stronger than 19% of 1038 Digital Standard servos |
| Torque-to-Volume Ratio | 56.49 oz-in/in³ Denser torque than 18% of 1043 Digital Standard servos |
| Speed-to-Weight | 0.15674 (1/sec·g) Faster than 74% of 1032 Digital Standard servos |
| Speed-Torque Trade-off | 12.10 Better balanced than 18% of 1029 Digital Standard servos |
| Current-per-Torque Ratio | 0.0273 A/oz-in More efficient than 18% of 322 Digital Standard servos |
| Idle-to-Running Current Ratio | 1.211 Lower idle draw than 5% of 124 Digital Standard servos |
| No-Load vs Stall Current Spread | 15.79 Narrower current spread than 56% of 143 Digital Standard servos |
| Torque Gain per Volt | 13.99%/V More voltage-responsive (torque) than 39% of 849 Digital Standard servos |
| Speed Gain per Volt | 21.97%/V More voltage-responsive (speed) than 85% of 869 Digital Standard servos |
| Voltage Range Width | 2.6 V Wider voltage range than 64% of 1555 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0020 Finer dead band than 20% of 480 Digital Standard servos |
Notes
A versatile high-speed digital servo offering both 300-degree and continuous rotation modes. It features a durable steel gear train, dual ball bearings, and a 25-tooth spline for robust performance.
Similar Active Servos
Reviews of GoBilda 2000-0025-0003
Be the first to review!