Discover XQ-Power Servos in Our eBay Store!
Shop NowGDW Servos (22)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| GDW | BLS892 | Hobby |
8.4V 361.1 oz-in26.00 kg-cm2.6 N-m 7.4V 319.5 oz-in23.00 kg-cm2.3 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.72 oz77.0 g | 1.59×0.83×1.54 in 40.4×21.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.62–9.54 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS893 | Hobby |
8.4V 500.0 oz-in36.01 kg-cm3.5 N-m 7.4V 458.4 oz-in33.01 kg-cm3.2 N-m 6.0V 388.9 oz-in28.01 kg-cm2.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.82 oz80.0 g | 1.59×0.83×1.54 in 40.4×21.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.14–9.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS895 | Hobby |
8.4V 173.6 oz-in12.50 kg-cm1.2 N-m 7.4V 152.8 oz-in11.00 kg-cm1.1 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.75 oz78.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.62–10.70 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS992 | Hobby |
8.4V 388.9 oz-in28.01 kg-cm2.7 N-m 7.4V 347.3 oz-in25.00 kg-cm2.5 N-m 6.0V 277.8 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | (add) | 1.57×0.79×1.47 in 39.9×20.1×37.3 mm | — | Standard | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 6.42–11.99 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | BLS995 | Hobby |
8.4V 152.8 oz-in11.00 kg-cm1.1 N-m 7.4V 132.0 oz-in9.50 kg-cm0.9 N-m 6.0V 111.1 oz-in8.00 kg-cm0.8 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.72 oz77.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Metal | Brushless | (add) | Metal | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.11–9.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS031MG | Hobby |
6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | (add) | 1.27×0.47×1.00 in 32.3×11.9×25.4 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.33–0.51 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS041MG | Hobby |
8.4V 69.5 oz-in5.00 kg-cm0.5 N-m 7.4V 55.6 oz-in4.00 kg-cm0.4 N-m 6.0V 48.6 oz-in3.50 kg-cm0.3 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.49 oz14.0 g | 1.27×0.47×1.00 in 32.3×11.9×25.4 mm | — | Mini | Plastic | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | 180° | 350 | (add) | 1000–2000 µs | (add) | (add) | (add) | Magnetic Encoder | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.64–1.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS1901C | Hobby |
8.4V 83.3 oz-in6.00 kg-cm0.6 N-m 7.4V 76.4 oz-in5.50 kg-cm0.5 N-m 6.0V 69.5 oz-in5.00 kg-cm0.5 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.88 oz25.0 g | 1.18×0.39×1.18 in 30.0×9.9×30.0 mm | — | Slim | Aluminum | Coreless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 1.07–1.54 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS1906A | Hobby |
8.4V 30.6 oz-in2.20 kg-cm0.2 N-m 7.4V 25.0 oz-in1.80 kg-cm0.2 N-m 6.0V 16.7 oz-in1.20 kg-cm0.1 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.29 oz8.3 g | 0.93×0.31×0.79 in 23.6×7.9×20.1 mm | — | Slim | Metal | Coreless | (add) | Metal | 15 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 110 mm4.33 in | China | 0.26–0.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS1906B | Hobby |
8.4V 30.6 oz-in2.20 kg-cm0.2 N-m 7.4V 25.0 oz-in1.80 kg-cm0.2 N-m 6.0V 16.7 oz-in1.20 kg-cm0.1 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | (add) | 0.93×0.31×0.79 in 23.6×7.9×20.1 mm | — | Micro | (add) | Coreless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.26–0.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS190C | Hobby |
8.4V 145.9 oz-in10.50 kg-cm1.0 N-m 7.4V 132.0 oz-in9.50 kg-cm0.9 N-m 6.0V 104.2 oz-in7.50 kg-cm0.7 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.23 oz35.0 g | 1.18×0.39×1.38 in 30.0×9.9×35.1 mm | — | Slim | Aluminum | Coreless | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | ≥-40°C≥-40.0°F | (add) | (add) | (add) | 220 mm8.66 in | China | 1.61–3.00 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS190X | Hobby |
8.4V 145.9 oz-in10.50 kg-cm1.0 N-m 7.4V 132.0 oz-in9.50 kg-cm0.9 N-m 6.0V 104.2 oz-in7.50 kg-cm0.7 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
1.1–1.5 A1100–1500 mA | 0.95 oz27.0 g | 1.18×0.39×1.38 in 30.0×9.9×35.1 mm | — | Slim | Aluminum | Coreless | (add) | Metal | (add) | (add) | Digital | Counterclockwise | (add) | 120 | (add) | (add) | (add) | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | -40–60°C-40.0–140.0°F | (add) | (add) | (add) | 220 mm8.66 in | China | 1.61–3.00 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS396MG | Hobby |
8.4V 125.0 oz-in9.00 kg-cm0.9 N-m 7.4V 157.0 oz-in11.30 kg-cm1.1 N-m 6.0V 179.2 oz-in12.90 kg-cm1.3 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | (add) | 1.40×0.59×1.16 in 35.6×15.0×29.5 mm | — | Mini | (add) | Coreless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 600 mm23.62 in | China | 1.78–3.68 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS590MG | Hobby |
8.4V 166.7 oz-in12.00 kg-cm1.2 N-m 7.4V 152.8 oz-in11.00 kg-cm1.1 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | (add) | 1.42×0.59×1.24 in 36.1×15.0×31.5 mm | — | Mini | (add) | Coreless | (add) | Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 2.89–5.14 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | DS945MG | Hobby |
8.4V 694.5 oz-in50.01 kg-cm4.9 N-m 7.4V 638.9 oz-in46.01 kg-cm4.5 N-m 6.0V 555.6 oz-in40.01 kg-cm3.9 N-m |
8.4V 0.15 s/60°400.0 deg/s66.7 RPM 7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 3.10 oz88.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | Metal | Coreless | (add) | Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.14–8.56 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G28 | Hobby | 12.0V 388.9 oz-in28.01 kg-cm2.7 N-m | 12.0V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 2.82 oz80.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 450–1050 µs | 760 µs | (add) | 400 Hz | (add) | (add) | (add) | 12–12 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 11.99 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G45 | Hobby | 12.8V 625.1 oz-in45.01 kg-cm4.4 N-m | 12.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 2.75 oz78.0 g | 1.59×0.79×1.52 in 40.4×20.1×38.6 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 12.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G92 | Hobby |
8.4V 597.3 oz-in43.01 kg-cm4.2 N-m 7.4V 527.8 oz-in38.01 kg-cm3.7 N-m 6.0V 430.6 oz-in31.01 kg-cm3.0 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.72 oz77.0 g | 1.57×0.79×1.48 in 39.9×20.1×37.6 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 330 mm12.99 in | China | 6.12–12.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | G95 | Hobby |
8.4V 347.3 oz-in25.00 kg-cm2.5 N-m 7.4V 305.6 oz-in22.00 kg-cm2.2 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | (add) | 2.17×0.79×1.48 in 55.1×20.1×37.6 mm | — | Low Profile | Metal | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.78–10.70 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | IPX896 | Hobby |
8.4V 500.0 oz-in36.01 kg-cm3.5 N-m 7.4V 458.4 oz-in33.01 kg-cm3.2 N-m 6.0V 388.9 oz-in28.01 kg-cm2.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 3.10 oz88.0 g | 1.59×0.83×1.44 in 40.4×21.1×36.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | Potentiometer | (add) | (add) | 4.8–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | IPX8 | (add) | (add) | 380 mm14.96 in | China | 5.14–9.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | RS4010 | Hobby |
8.4V 625.1 oz-in45.01 kg-cm4.4 N-m 7.4V 555.6 oz-in40.01 kg-cm3.9 N-m 6.0V 472.3 oz-in34.01 kg-cm3.3 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | (add) | 2.17×0.79×1.76 in 55.1×20.1×44.7 mm | — | Large | Metal | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | 360° | (add) | (add) | 1000–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 6.24–11.56 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| GDW | RS4016 | Hobby |
8.4V 597.3 oz-in43.01 kg-cm4.2 N-m 7.4V 527.8 oz-in38.01 kg-cm3.7 N-m 6.0V 458.4 oz-in33.01 kg-cm3.2 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | (add) | 2.17×0.79×1.76 in 55.1×20.1×44.7 mm | — | Large | Metal | Coreless | (add) | Steel | (add) | (add) | Digital | (add) | 360° | 180 | (add) | 1000–2000 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.71–8.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: GDW
Stall Current: (add)
Shaft Power: 4.62–9.54 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.54 in 40.4×21.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–9.25 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.54 in 40.4×21.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 4.62–10.70 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 6.42–11.99 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.47 in 39.9×20.1×37.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 4.11–9.42 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 0.33–0.51 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.27×0.47×1.00 in 32.3×11.9×25.4 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 0.64–1.28 W
Weight: 0.49 oz14.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.27×0.47×1.00 in 32.3×11.9×25.4 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 350
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 1.07–1.54 W
Weight: 0.88 oz25.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.18 in 30.0×9.9×30.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 0.26–0.57 W
Weight: 0.29 oz8.3 g
Size Class: Slim
Diameter: —
Dimensions: 0.93×0.31×0.79 in 23.6×7.9×20.1 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 110 mm4.33 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 0.26–0.57 W
Weight: (add)
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.31×0.79 in 23.6×7.9×20.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 1.61–3.00 W
Weight: 1.23 oz35.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×9.9×35.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≥-40°C≥-40.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 220 mm8.66 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: 1.1–1.5 A1100–1500 mA
Shaft Power: 1.61–3.00 W
Weight: 0.95 oz27.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×9.9×35.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: Counterclockwise
Op. Range: (add)
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -40–60°C-40.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 220 mm8.66 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 1.78–3.68 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.16 in 35.6×15.0×29.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 600 mm23.62 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 2.89–5.14 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.24 in 36.1×15.0×31.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–8.56 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 11.99 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 12–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 12.84 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.52 in 40.4×20.1×38.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 6.12–12.27 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 39.9×20.1×37.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 330 mm12.99 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.78–10.70 W
Weight: (add)
Size Class: Low Profile
Diameter: —
Dimensions: 2.17×0.79×1.48 in 55.1×20.1×37.6 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 5.14–9.25 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.44 in 40.4×21.1×36.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IPX8
Certification: (add)
Connector: (add)
Wire Length: 380 mm14.96 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 6.24–11.56 W
Weight: (add)
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.76 in 55.1×20.1×44.7 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: GDW
Stall Current: (add)
Shaft Power: 4.71–8.50 W
Weight: (add)
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.76 in 55.1×20.1×44.7 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.