Discover XQ-Power Servos in Our eBay Store!
Shop NowAnalog Servos (1,119)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hitec | HS-40 | Hobby |
6.0V 11.0 oz-in0.79 kg-cm0.1 N-m 4.8V 8.0 oz-in0.58 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
≤0.46 A≤460 mA | 0.17 oz4.8 g | 0.79×0.34×0.67 in 20.1×8.6×17.0 mm | — | Micro | Plastic | Brushed | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | 1500 µs | 5 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.12–0.20 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 8.000 A8,000 mA | — | — | ||
| Hitec | HS-422 | Hobby |
6.0V 57.0 oz-in4.10 kg-cm0.4 N-m 4.8V 46.0 oz-in3.31 kg-cm0.3 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
0.6–0.8 A600–800 mA | 1.60 oz45.4 g | 1.60×0.78×1.44 in 40.6×19.8×36.5 mm | — | Standard | Plastic | 3-pole | (add) | Nylon | Plastic | 24 | Dual Bearings | Analog | Clockwise | 120° | 180 | 20 ms | 900–2100 µs | 1500 µs | 5 µs | 50 Hz | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | IP4X | (add) | JR (Universal) | 300 mm11.81 in | (add) | 0.41–0.66 W | — | 6.0 mm | — | — | — | — | — | — | Position | 0.180 A @ 6.0V180 mA @ 6.0V | Positional | 0.008 A8 mA | 0.500° | 3-5V | ||
| Hitec | HS-425BB | Hobby |
6.0V 57.0 oz-in4.10 kg-cm0.4 N-m 4.8V 46.0 oz-in3.31 kg-cm0.3 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.21 s/60°285.7 deg/s47.6 RPM |
0.6–0.75 A600–750 mA | 1.60 oz45.4 g | 1.59×0.77×1.44 in 40.4×19.6×36.6 mm | — | Standard | Plastic | 3-pole | (add) | Nylon | 24 | Dual Bearings | Analog | Clockwise | 80° | 188 | 20 ms | 900–2100 µs | 1500 µs | 5 µs | 50 Hz | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | Philippines | 0.41–0.66 W | — | 6.0 mm | — | — | — | — | — | — | — | 0.180 A @ 6.0V180 mA @ 6.0V | Positional | 0.009 A9 mA | 0.500° | 3-5V | ||
| Hitec | HS-430BH | Hobby |
7.4V 69.0 oz-in4.97 kg-cm0.5 N-m 6.0V 57.0 oz-in4.10 kg-cm0.4 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
≤0.85 A≤850 mA | 1.60 oz45.5 g | 1.59×0.77×1.44 in 40.4×19.6×36.6 mm | — | Standard | Plastic | Brushed | (add) | Plastic | 24 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | 1500 µs | 8 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 0.66–0.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 8.000 A8,000 mA | — | — | ||
| Hitec | HS-45HB | Hobby |
6.0V 17.0 oz-in1.22 kg-cm0.1 N-m 4.8V 14.0 oz-in1.01 kg-cm0.1 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.28 oz7.9 g | 0.92×0.38×0.88 in 23.4×9.7×22.4 mm | — | Micro | (add) | 3-pole | (add) | Plastic | 15 | Single Bearing | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.18–0.26 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-475HB * | Hobby |
6.0V 76.0 oz-in5.47 kg-cm0.5 N-m 4.8V 61.0 oz-in4.39 kg-cm0.4 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
0.9–1.1 A900–1100 mA | 1.41 oz40.0 g | 1.52×0.77×1.41 in 38.6×19.6×35.8 mm | — | Standard | (add) | 3-pole | PWM | Plastic | 24 | Single Bearing | Analog | Clockwise | 200° | (add) | 20 ms | 900–2100 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | S | 300 mm11.81 in | South Korea | 0.49–0.78 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.007 A7 mA | — | — | ||
| Hitec | HS-485HB | Hobby |
6.0V 83.0 oz-in5.98 kg-cm0.6 N-m 4.8V 67.0 oz-in4.82 kg-cm0.5 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
1–1.2 A1000–1200 mA | 1.59 oz45.0 g | 1.57×0.78×1.49 in 39.9×19.8×37.8 mm | — | Standard | Plastic | 3-pole | (add) | Karbonite | 24 | Single Bearing | Analog | Clockwise | 120° | 190 | 20 ms | 900–2100 µs | 1500 µs | 8 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | IP4X | (add) | JR (Universal) | 300 mm11.81 in | (add) | 0.56–0.85 W | — | 6.0 mm | — | — | — | — | — | — | — | 200.000 A @ 6.0V200,000 mA @ 6.0V | Positional | 0.008 A8 mA | 0.500° | 3-5V | ||
| Hitec | HS-50 * | Hobby | 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m | 4.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 0.23 oz6.4 g | 0.82×0.44×0.86 in 20.8×11.2×21.8 mm | — | Micro | (add) | 3-pole | (add) | Plastic | (add) | Bushing | Analog | Clockwise | 80° | (add) | 20 ms | 900–2100 µs | 1500 µs | 8 µs | (add) | Potentiometer | PWM | No | 4.8–4.8 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | S | 160 mm6.30 in | Philippines | 0.17 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Hitec | HS-525BB * | Hobby |
6.0V 56.9 oz-in4.10 kg-cm0.4 N-m 4.8V 45.8 oz-in3.30 kg-cm0.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.59 oz45.2 g | 1.56×0.77×1.41 in 39.6×19.6×35.8 mm | — | Standard | (add) | 5-pole | (add) | Plastic | 24 | Single Bearing | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.50–0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-525MG * | Hobby |
6.0V 56.9 oz-in4.10 kg-cm0.4 N-m 4.8V 45.8 oz-in3.30 kg-cm0.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.80 oz51.0 g | 1.56×0.77×1.41 in 39.6×19.6×35.8 mm | — | Standard | (add) | 5-pole | (add) | Metal | 24 | Single Bearing | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.50–0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-53 | Hobby |
6.0V 21.0 oz-in1.51 kg-cm0.1 N-m 4.8V 17.0 oz-in1.22 kg-cm0.1 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
≤0.55 A≤550 mA | 0.28 oz8.0 g | 1.12×0.46×0.95 in 28.4×11.7×24.1 mm | — | Mini | Plastic | Brushed | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | 1500 µs | 5 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.20–0.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 10.000 A10,000 mA | — | — | ||
| Hitec | HS-545BB * | Hobby |
6.0V 76.4 oz-in5.50 kg-cm0.5 N-m 4.8V 61.1 oz-in4.40 kg-cm0.4 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 1.57 oz44.5 g | 1.56×0.77×1.41 in 39.6×19.6×35.8 mm | — | Standard | (add) | 5-pole | (add) | Plastic | 24 | Single Bearing | Analog | Clockwise | 90° | (add) | 20 ms | 900–2100 µs | 1500 µs | 6 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | Z | 300 mm11.81 in | (add) | 0.51–0.83 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.008 A8 mA | — | — | ||
| Hitec | HS-55 | Hobby |
6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 4.8V 16.7 oz-in1.20 kg-cm0.1 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
≤0.45 A≤450 mA | 0.28 oz8.0 g | 0.90×0.46×0.95 in 22.8×11.6×24.0 mm | — | Micro | Plastic | Coreless | (add) | Nylon | 15 | Bushing | Analog | Clockwise | 120° | 200 | 20 ms | 615–2390 µs | 1500 µs | 5 µs | 50 Hz | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | IP4X | (add) | JR (Universal) | 250 mm9.84 in | South Korea | 0.17–0.28 W | — | 4.0 mm | — | — | — | — | — | — | — | 180.000 A @ 6.0V180,000 mA @ 6.0V | Positional | 0.006 A6 mA | 0.500° | 3-5V | ||
| Hitec | HS-56HB * | Hobby |
6.0V 16.6 oz-in1.20 kg-cm0.1 N-m 4.8V 13.8 oz-in0.99 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
0.96–1.2 A960–1200 mA | 0.35 oz10.0 g | 0.88×0.45×0.94 in 22.4×11.4×23.9 mm | 5.0 mm0.20 in | Micro | (add) | 3-pole | (add) | Plastic | 15 | Single Bearing | Analog | (add) | 40° | (add) | 20 ms | 900–2100 µs | (add) | 5 µs | (add) | (add) | PWM | No | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | S | (add) | (add) | 0.21–0.31 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Hitec | HS-5755MG * | Hobby |
6.0V 347.0 oz-in24.99 kg-cm2.5 N-m 4.8V 278.0 oz-in20.02 kg-cm2.0 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 5.68 oz161.0 g | 2.32×1.14×2.04 in 58.9×29.0×51.8 mm | — | Giant | (add) | Brushed | (add) | Metal | (add) | Triple Bearings | Analog | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.86–4.28 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-60 * | Hobby |
6.0V 18.0 oz-in1.30 kg-cm0.1 N-m 4.8V 15.4 oz-in1.11 kg-cm0.1 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 0.48 oz13.5 g | 1.00×0.50×0.90 in 25.4×12.7×22.9 mm | — | Micro | (add) | 3-pole | (add) | Plastic | 15 | Bushing | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.14–0.21 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-605BB * | Hobby |
6.0V 94.4 oz-in6.80 kg-cm0.7 N-m 4.8V 76.4 oz-in5.50 kg-cm0.5 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.73 oz49.0 g | 1.59×0.77×1.57 in 40.4×19.6×39.9 mm | — | Standard | (add) | 3-pole | (add) | Plastic | 24 | Dual Bearings | Analog | Clockwise | 90° | (add) | 20 ms | 900–2100 µs | 1500 µs | 8 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 300 mm11.81 in | (add) | 0.83–1.34 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Hitec | HS-605MG * | Hobby |
6.0V 94.4 oz-in6.80 kg-cm0.7 N-m 4.8V 76.4 oz-in5.50 kg-cm0.5 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.87 oz53.0 g | 1.59×0.77×1.57 in 40.4×19.6×39.9 mm | — | Standard | (add) | 3-pole | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.83–1.34 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-615MG * | Hobby | 6.0V 132.0 oz-in9.51 kg-cm0.9 N-m | 6.0V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.12 oz60.0 g | 1.60×0.80×1.50 in 40.6×20.3×38.1 mm | — | Standard | (add) | 3-pole | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | No | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 298 mm11.73 in | (add) | 1.44 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-625MG * | Hobby |
6.0V 94.0 oz-in6.77 kg-cm0.7 N-m 4.8V 76.0 oz-in5.47 kg-cm0.5 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.77×1.48 in 40.4×19.6×37.6 mm | — | Standard | (add) | 3-pole | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.78–1.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-635HB * | Hobby |
6.0V 83.0 oz-in5.98 kg-cm0.6 N-m 4.8V 69.0 oz-in4.97 kg-cm0.5 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
2–2.5 A2000–2500 mA | 1.76 oz49.9 g | 1.59×0.77×1.52 in 40.4×19.6×38.6 mm | — | Standard | (add) | 3-pole | MOS | Plastic | 24 | Dual Bearings | Analog | Clockwise | 80° | (add) | 20 ms | 900–2100 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | S | 300 mm11.81 in | (add) | 0.71–1.02 W | — | 5.8 mm | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Hitec | HS-645MG | Hobby |
6.0V 133.3 oz-in9.60 kg-cm0.9 N-m 4.8V 106.9 oz-in7.70 kg-cm0.8 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.24 s/60°250.0 deg/s41.7 RPM |
≤2.5 A≤2500 mA | 1.94 oz55.0 g | 1.60×0.78×1.49 in 40.6×19.8×37.8 mm | — | Standard | Plastic | 3-pole | PWM | Metal / Plastic | 24 | Dual Bearings | Analog | Clockwise | 180° | 200 | 20 ms | 900–2100 µs | 1500 µs | 8 µs | 50 Hz | Potentiometer | PWM | No | 4.8–6.8 V | 2S LiFe | Direct | -20–60°C-4.0–140.0°F | None | ROHS | ISO | JR (Universal) | 300 mm11.81 in | (add) | 0.82–1.23 W | — | 6.0 mm | — | — | — | — | — | — | — | 0.450 A @ 6.0V450 mA @ 6.0V | Positional | 0.009 A9 mA | 0.500° | 3-5V | ||
| Hitec | HS-646WP * | Hobby |
7.4V 161.0 oz-in11.59 kg-cm1.1 N-m 6.0V 133.0 oz-in9.58 kg-cm0.9 N-m |
7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
≤2.2 A≤2200 mA | 2.12 oz60.0 g | 1.65×0.83×1.57 in 41.9×21.1×39.9 mm | — | Standard | Plastic | Brushed | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | IP67 | (add) | JR (Universal) | (add) | (add) | 1.23–1.75 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 8.000 A8,000 mA | — | — | ||
| Hitec | HS-65HB | Hobby |
6.0V 26.0 oz-in1.87 kg-cm0.2 N-m 4.8V 22.0 oz-in1.58 kg-cm0.2 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
0.96–1.2 A960–1200 mA | 0.39 oz11.1 g | 0.92×0.45×0.94 in 23.4×11.4×23.9 mm | — | Micro | Plastic | 3-pole | (add) | Plastic | 15 | Single Bearing | Analog | Clockwise | 180° | (add) | 20 ms | 900–2100 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | S | 160 mm6.30 in | South Korea | 0.25–0.37 W | — | 5.0 mm | — | — | — | — | — | — | Position | (add) | Positional | 0.007 A7 mA | 0.500° | 3-5V | ||
| Hitec | HS-65MG | Hobby |
6.0V 31.0 oz-in2.23 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
0.96–1.2 A960–1200 mA | 0.42 oz11.9 g | 0.92×0.45×0.94 in 23.4×11.4×23.9 mm | — | Micro | Plastic | 3-pole | (add) | Metal | 15 | Single Bearing | Analog | Clockwise | 120° | (add) | 20 ms | 900–2100 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP40 | (add) | JR (Universal) | 160 mm6.30 in | (add) | 0.33–0.52 W | — | 5.0 mm | — | — | — | — | — | — | — | (add) | Positional | 0.008 A8 mA | 0.500° | 3-5V | ||
Make: Hitec
Stall Current: ≤0.46 A≤460 mA
Shaft Power: 0.12–0.20 W
Weight: 0.17 oz4.8 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.34×0.67 in 20.1×8.6×17.0 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 0.6–0.8 A600–800 mA
Shaft Power: 0.41–0.66 W
Weight: 1.60 oz45.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.78×1.44 in 40.6×19.8×36.5 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Nylon | Plastic
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 120°
Mech. Limit: 180
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP4X
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: 0.6–0.75 A600–750 mA
Shaft Power: 0.41–0.66 W
Weight: 1.60 oz45.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.44 in 40.4×19.6×36.6 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: 188
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: Philippines
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤0.85 A≤850 mA
Shaft Power: 0.66–0.91 W
Weight: 1.60 oz45.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.44 in 40.4×19.6×36.6 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.18–0.26 W
Weight: 0.28 oz7.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.92×0.38×0.88 in 23.4×9.7×22.4 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 0.9–1.1 A900–1100 mA
Shaft Power: 0.49–0.78 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.52×0.77×1.41 in 38.6×19.6×35.8 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: PWM
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 300 mm11.81 in
Country of Origin: South Korea
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 1–1.2 A1000–1200 mA
Shaft Power: 0.56–0.85 W
Weight: 1.59 oz45.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.49 in 39.9×19.8×37.8 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 120°
Mech. Limit: 190
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP4X
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.17 W
Weight: 0.23 oz6.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.82×0.44×0.86 in 20.8×11.2×21.8 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 160 mm6.30 in
Country of Origin: Philippines
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: (add)
Shaft Power: 0.50–0.81 W
Weight: 1.59 oz45.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.77×1.41 in 39.6×19.6×35.8 mm
Case Material: (add)
Motor Type: 5-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.50–0.81 W
Weight: 1.80 oz51.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.77×1.41 in 39.6×19.6×35.8 mm
Case Material: (add)
Motor Type: 5-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤0.55 A≤550 mA
Shaft Power: 0.20–0.30 W
Weight: 0.28 oz8.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.12×0.46×0.95 in 28.4×11.7×24.1 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.51–0.83 W
Weight: 1.57 oz44.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.77×1.41 in 39.6×19.6×35.8 mm
Case Material: (add)
Motor Type: 5-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 6 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: Z
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤0.45 A≤450 mA
Shaft Power: 0.17–0.28 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.46×0.95 in 22.8×11.6×24.0 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 15
Rotation: Bushing
Modulation: Analog
Direction: Clockwise
Op. Range: 120°
Mech. Limit: 200
Pulse Cycle: 20 ms
Pulse Width: 615–2390 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP4X
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: South Korea
Shape: —
Shaft Size: 4.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 0.96–1.2 A960–1200 mA
Shaft Power: 0.21–0.31 W
Weight: 0.35 oz10.0 g
Size Class: Micro
Diameter: 5.0 mm0.20 in
Dimensions: 0.88×0.45×0.94 in 22.4×11.4×23.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: (add)
Shaft Power: 2.86–4.28 W
Weight: 5.68 oz161.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.32×1.14×2.04 in 58.9×29.0×51.8 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Triple Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.14–0.21 W
Weight: 0.48 oz13.5 g
Size Class: Micro
Diameter: —
Dimensions: 1.00×0.50×0.90 in 25.4×12.7×22.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.83–1.34 W
Weight: 1.73 oz49.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.57 in 40.4×19.6×39.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: (add)
Shaft Power: 0.83–1.34 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.57 in 40.4×19.6×39.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.44 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.80×1.50 in 40.6×20.3×38.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 298 mm11.73 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.78–1.16 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.48 in 40.4×19.6×37.6 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 2–2.5 A2000–2500 mA
Shaft Power: 0.71–1.02 W
Weight: 1.76 oz49.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.52 in 40.4×19.6×38.6 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: MOS
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: 5.8 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: ≤2.5 A≤2500 mA
Shaft Power: 0.82–1.23 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.78×1.49 in 40.6×19.8×37.8 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: PWM
Gear Material: Metal / Plastic
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 180°
Mech. Limit: 200
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: 2S LiFe
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: None
Certification: ROHS | ISO
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤2.2 A≤2200 mA
Shaft Power: 1.23–1.75 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.83×1.57 in 41.9×21.1×39.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 0.96–1.2 A960–1200 mA
Shaft Power: 0.25–0.37 W
Weight: 0.39 oz11.1 g
Size Class: Micro
Diameter: —
Dimensions: 0.92×0.45×0.94 in 23.4×11.4×23.9 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 160 mm6.30 in
Country of Origin: South Korea
Shape: —
Shaft Size: 5.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: 0.96–1.2 A960–1200 mA
Shaft Power: 0.33–0.52 W
Weight: 0.42 oz11.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.92×0.45×0.94 in 23.4×11.4×23.9 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP40
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: (add)
Shape: —
Shaft Size: 5.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.