Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-23
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 32646W |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
7.4V
161.00 oz-in
11.59 kg-cm
1.1 N-m
6.0V
133.00 oz-in
9.58 kg-cm
0.9 N-m
Above Average
|
| Speed |
7.4V
0.17 sec/60°
352.9 deg/s
58.8 RPM
6.0V
0.20 sec/60°
300.0 deg/s
50.0 RPM
Below Average
|
| Running Current |
7.4V
0.600 A
600 mA
6.0V
0.400 A
400 mA
Below Average
|
| Stall Current | 2–2.2 A2000–2200 mABelow Average |
| Physical | |
| Weight | 2.12 oz60.0 gBelow Average |
| Dimensions |
L 1.65 in W 0.83 in H 1.57 in L 41.9 mm W 21.1 mm H 39.9 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | Cored |
| Gears | Metal |
| Gear Spline/Teeth | 24 T |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Backlash | 0.500° |
| Control & Signal | |
| Modulation | Analog |
| Direction | Clockwise |
| Rotational Range | 120° |
| Pulse Width | 900-2100 µs |
| Neutral Position | 1500 µs |
| Dead Band | 4 µs |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Programmable | No |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 6–7.4 V |
| Power Source | 2S LiPo |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | IP67 |
| Idle Current | 0.008 A8 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 81% of 198 Analog Standard servos at 6.0V |
| Speed | Below Average Faster than 28% of 195 Analog Standard servos at 6.0V |
| Weight | Below Average Lighter than 11% of 447 Analog Standard servos |
| Running Current | Below Average Lower draw than 17% of 49 Analog Standard servos at 6.0V |
| Stall Current | Below Average Lower draw than 24% of 63 Analog Standard servos |
Performance Analysis
| Shaft Power | 1.23–1.75 W |
| Power Density | 0.814 W/in³ More power-dense than 70% of 432 Analog Standard servos |
| Torque Density | 2.2167 oz-in/g Stronger than 74% of 198 Analog Standard servos |
| Torque-to-Volume Ratio | 61.86 oz-in/in³ Denser torque than 72% of 198 Analog Standard servos |
| Speed-to-Weight | 0.08333 (1/sec·g) Faster than 14% of 195 Analog Standard servos |
| Speed-Torque Trade-off | 26.60 Better balanced than 83% of 195 Analog Standard servos |
| Current-per-Torque Ratio | 0.0165 A/oz-in More efficient than 64% of 54 Analog Standard servos |
| Idle-to-Running Current Ratio | 0.020 Lower idle draw than 81% of 38 Analog Standard servos |
| No-Load vs Stall Current Spread | 5.50 Narrower current spread than 74% of 35 Analog Standard servos |
| Torque Gain per Volt | 15.04%/V More voltage-responsive (torque) than 50% of 156 Analog Standard servos |
| Speed Gain per Volt | 12.60%/V More voltage-responsive (speed) than 41% of 156 Analog Standard servos |
| Voltage Range Width | 1.4 V Wider voltage range than 82% of 239 Analog Standard servos |
| Backlash-to-Range Ratio | 0.00417 Tighter backlash than 24% of 43 Hitec servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0033 Finer dead band than 73% of 56 Analog Standard servos |
Similar Active Servos
Reviews of Hitec HS-646WP
Be the first to review!