Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-09-16
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 33056S |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
16.60 oz-in
1.20 kg-cm
0.1 N-m
4.8V
13.80 oz-in
0.99 kg-cm
0.1 N-m
Below Average
|
| Speed |
6.0V
0.10 sec/60°
600.0 deg/s
100.0 RPM
4.8V
0.12 sec/60°
500.0 deg/s
83.3 RPM
Above Average
|
| Running Current |
6.0V
0.240 A
240 mA
4.8V
0.200 A
200 mA
Below Average
|
| Stall Current | 0.96–1.2 A960–1200 mABelow Average |
| Physical | |
| Weight | 0.35 oz10.0 gBelow Average |
| Dimensions |
L 0.88 in W 0.45 in H 0.94 in L 22.4 mm W 11.4 mm H 23.9 mm |
| Drivetrain | |
| Motor Type | 3-pole |
| Gears | Plastic |
| Gear Spline/Teeth | 15 T estimate |
| Rotation Mode | Positional |
| Rotation/Support | Single Bearing |
| Control & Signal | |
| Modulation | Analog |
| Rotational Range | 40° |
| Pulse Cycle | 20 ms |
| Pulse Width | 900-2100 µs |
| Dead Band | 5 µs |
| Control System | PWM |
| Programmable | No |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Idle Current | 0.008 A8 mA |
| Connectivity | |
| Connector | S |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Below Average Stronger than 27% of 170 Analog Micro servos at 4.8V |
| Speed | Above Average Faster than 65% of 170 Analog Micro servos at 4.8V |
| Weight | Below Average Lighter than 26% of 346 Analog Micro servos |
| Running Current | Below Average Lower draw than 34% of 33 Analog Micro servos at 4.8V |
| Stall Current | Below Average Lower draw than 15% of 54 Analog Micro servos |
Performance Analysis
| Shaft Power | 0.21–0.31 W |
| Power Density | 0.824 W/in³ More power-dense than 43% of 333 Analog Micro servos |
| Torque Density | 1.3800 oz-in/g Stronger than 5% of 170 Analog Micro servos |
| Torque-to-Volume Ratio | 37.07 oz-in/in³ Denser torque than 22% of 170 Analog Micro servos |
| Speed-to-Weight | 0.83333 (1/sec·g) Faster than 33% of 170 Analog Micro servos |
| Speed-Torque Trade-off | 1.66 Better balanced than 27% of 169 Analog Micro servos |
| Current-per-Torque Ratio | 0.0870 A/oz-in More efficient than 0% of 45 Analog Micro servos |
| Idle-to-Running Current Ratio | 0.039 Lower idle draw than 73% of 23 Analog Micro servos |
| No-Load vs Stall Current Spread | 6.00 Narrower current spread than 33% of 25 Analog Micro servos |
| Torque Gain per Volt | 16.91%/V More voltage-responsive (torque) than 64% of 96 Analog Micro servos |
| Speed Gain per Volt | 16.67%/V More voltage-responsive (speed) than 65% of 96 Analog Micro servos |
| Voltage Range Width | 1.2 V Wider voltage range than 76% of 182 Analog Micro servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0042 Finer dead band than 52% of 43 Analog Micro servos |
Similar Active Servos
Reviews of Hitec HS-56HB
Be the first to review!