Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-475HB
Standard Discontinued

Hitec HS-475HB

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-09-13
Identity
Brand Hitec
Product Number 33475S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 76.00 oz-in
4.8V 61.00 oz-in Average
Speed
6.0V 0.18 sec/60°
4.8V 0.23 sec/60° Below Average
Running Current
6.0V 0.180 A
4.8V 0.160 A Above Average
Stall Current 0.9–1.1 AAbove Average
Physical
Weight 1.41 ozAbove Average
Dimensions L 1.52 in
W 0.77 in
H 1.41 in
Drivetrain
Motor Type 3-pole
Motor Drive PWM
Gears Plastic
Gear Spline/Teeth 24 T
Rotation/Support Single Bearing
Control & Signal
Modulation Analog
Direction Clockwise
Rotational Range 200°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 5 µs
Angle Sensor Potentiometer
Control System PWM
Programmable No
Electrical & Environment
Operating Voltage 4.8–6 V
Idle Current 0.007 A
Connectivity
Connector S
Wire Length 300 mm
Origin
Country of Origin South Korea

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAverage
Stronger than 36% of 198 Analog Standard servos at 4.8V
SpeedBelow Average
Faster than 15% of 195 Analog Standard servos at 4.8V
WeightAbove Average
Lighter than 86% of 447 Analog Standard servos
Running CurrentAbove Average
Lower draw than 75% of 49 Analog Standard servos at 4.8V
Stall CurrentAbove Average
Lower draw than 71% of 63 Analog Standard servos

Performance Analysis

Shaft Power 0.49–0.78 W
Power Density0.473 W/in³
More power-dense than 38% of 432 Analog Standard servos
Torque Density1.5250 oz-in/g
Stronger than 46% of 198 Analog Standard servos
Torque-to-Volume Ratio36.96 oz-in/in³
Denser torque than 41% of 198 Analog Standard servos
Speed-to-Weight0.10870 (1/sec·g)
Faster than 43% of 195 Analog Standard servos
Speed-Torque Trade-off14.03
Better balanced than 52% of 195 Analog Standard servos
Current-per-Torque Ratio0.0180 A/oz-in
More efficient than 53% of 54 Analog Standard servos
Idle-to-Running Current Ratio0.044
Lower idle draw than 59% of 38 Analog Standard servos
No-Load vs Stall Current Spread6.88
Narrower current spread than 56% of 35 Analog Standard servos
Torque Gain per Volt20.49%/V
More voltage-responsive (torque) than 77% of 156 Analog Standard servos
Speed Gain per Volt23.13%/V
More voltage-responsive (speed) than 92% of 156 Analog Standard servos
Voltage Range Width1.2 V
Wider voltage range than 59% of 239 Analog Standard servos
Dead-Band-to-Pulse-Width Ratio0.0042
Finer dead band than 44% of 56 Analog Standard servos

Similar Active Servos

Reviews (2)

  • Krojby

    May 5, 2012

    Application(s): Swash on large helicopter

    Comments: Absolutely no complains. Works perfect all 3 pc on the swash at my Kyosho caliber 30.

  • Carlos Márquez

    October 1, 2010

    Application(s): aileron servo in little jets

    Comments: low cost. carbonite gears.

Submit a review of Hitec HS-475HB