Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-525MG
Standard Discontinued

Hitec HS-525MG

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-08
Identity
Brand Hitec
Product Number 32525
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 56.90 oz-in
4.8V 45.80 oz-in Below Average
Speed
6.0V 0.13 sec/60°
4.8V 0.17 sec/60° Above Average
Physical
Weight 1.80 ozAverage
Dimensions L 1.56 in
W 0.77 in
H 1.41 in
Drivetrain
Motor Type Brushed
Gears Metal
Gear Spline/Teeth 24 T estimate
Rotation Mode Positional
Rotation/Support Single Bearing
Control & Signal
Modulation Analog
Direction Clockwise
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Refresh Rate 50 Hz
Control System PWM
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–6 V

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 24% of 192 Analog Standard servos at 4.8V
SpeedAbove Average
Faster than 65% of 190 Analog Standard servos at 4.8V
WeightAverage
Lighter than 40% of 448 Analog Standard servos

Performance Analysis

Shaft Power 0.50–0.81 W
Power Density0.478 W/in³
More power-dense than 38% of 437 Analog Standard servos
Torque Density0.8980 oz-in/g
Stronger than 7% of 192 Analog Standard servos
Torque-to-Volume Ratio27.04 oz-in/in³
Denser torque than 28% of 192 Analog Standard servos
Speed-to-Weight0.11534 (1/sec·g)
Faster than 52% of 190 Analog Standard servos
Speed-Torque Trade-off7.79
Better balanced than 10% of 190 Analog Standard servos
Torque Gain per Volt20.20%/V
More voltage-responsive (torque) than 75% of 145 Analog Standard servos
Speed Gain per Volt25.64%/V
More voltage-responsive (speed) than 96% of 147 Analog Standard servos
Voltage Range Width1.2 V
Wider voltage range than 59% of 229 Analog Standard servos

Similar Active Servos

Reviews (1)

  • ShawnStang

    August 17, 2012

    Application(s): Steering servo for RC10T2/B2

    Comments: Fast lock to lock and very sturdy! If you get a chance to pick this servo up for cheap.... don't pass it by! Not powerful enough for heavy vehicles such as Scalers, Clodbuster, and other heavy RC's.

Submit a review of Hitec HS-525MG