Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| NSDRC | RS700 V2 | Hobby |
16.8V 1,115.0 oz-in80.29 kg-cm7.9 N-m 12.6V 912.0 oz-in65.67 kg-cm6.4 N-m 8.4V 634.0 oz-in45.65 kg-cm4.5 N-m |
16.8V 0.09 s/60°666.7 deg/s111.1 RPM 12.6V 0.11 s/60°545.5 deg/s90.9 RPM 8.4V 0.15 s/60°400.0 deg/s66.7 RPM |
3.6–5.8 A3600–5800 mA | 2.47 oz70.0 g | 1.575×0.787×1.181 in 40.0×20.0×30.0 mm | — | Low Profile | Aluminum | 4-pole | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | Magnetic Encoder | (add) | (add) | 8.4–16.8 V | Direct | Direct | -10–50°C14.0–122.0°F | IP66 | (add) | (add) | 220 mm8.66 in | USA | 7.82–22.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | RS800 V2 | Hobby |
16.8V 1,100.0 oz-in79.21 kg-cm7.8 N-m 12.6V 900.0 oz-in64.81 kg-cm6.4 N-m 8.4V 600.0 oz-in43.20 kg-cm4.2 N-m |
16.8V 0.10 s/60°600.0 deg/s100.0 RPM 12.6V 0.14 s/60°428.6 deg/s71.4 RPM 8.4V 0.18 s/60°333.3 deg/s55.6 RPM |
3.5–6.6 A3500–6600 mA | 3.00 oz85.0 g | 1.575×0.787×1.539 in 40.0×20.0×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 3 µs | (add) | Potentiometer | (add) | (add) | 8.4–16.8 V | 2S-4S LiPo | Direct | -10–50°C14.0–122.0°F | IP67 | (add) | JST | 310 mm12.20 in | USA | 6.16–20.34 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| NSDRC | SS200 | Hobby |
8.4V 245.0 oz-in17.64 kg-cm1.7 N-m 7.4V 215.0 oz-in15.48 kg-cm1.5 N-m 6.0V 177.0 oz-in12.75 kg-cm1.2 N-m 5.0V 145.0 oz-in10.44 kg-cm1.0 N-m |
8.4V 0.03 s/60°1,818.2 deg/s303.0 RPM 7.4V 0.04 s/60°1,621.6 deg/s270.3 RPM 6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 5.0V 0.05 s/60°1,132.1 deg/s188.7 RPM |
4.1–6.2 A4100–6200 mA | 2.29 oz65.0 g | 1.575×0.787×1.063 in 40.0×20.0×27.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | 330 Hz | Potentiometer | (add) | (add) | 5–8.4 V | (add) | BEC | -10–50°C14.0–122.0°F | IP66 | (add) | (add) | 310 mm12.20 in | USA | 5.06–13.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | SS400 | Hobby |
8.4V 400.0 oz-in28.80 kg-cm2.8 N-m 7.4V 345.0 oz-in24.84 kg-cm2.4 N-m 6.0V 290.0 oz-in20.88 kg-cm2.0 N-m 5.0V 230.0 oz-in16.56 kg-cm1.6 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.08 s/60°750.0 deg/s125.0 RPM |
3.1–4.6 A3100–4600 mA | 2.26 oz64.0 g | 1.575×0.787×1.063 in 40.0×20.0×27.0 mm | — | Low Profile | Aluminum | Coreless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | Magnetic Encoder | (add) | (add) | 5–8.4 V | (add) | BEC | -10–50°C14.0–122.0°F | IP67 | (add) | (add) | 320 mm12.60 in | USA | 5.32–14.79 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | SS600 | Hobby |
8.4V 687.0 oz-in49.47 kg-cm4.9 N-m 7.4V 600.0 oz-in43.20 kg-cm4.2 N-m 6.0V 512.0 oz-in36.87 kg-cm3.6 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM |
3.1–4.3 A3100–4300 mA | 3.23 oz91.5 g | 1.575×0.787×1.524 in 40.0×20.0×38.7 mm | — | Standard | Aluminum | 4-pole | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | 330 Hz | Potentiometer | (add) | (add) | 5–8.4 V | (add) | BEC | -10–50°C14.0–122.0°F | IP66 | (add) | (add) | 220 mm8.66 in | USA | 15.78–31.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-202BL | Hobby |
8.4V 277.7 oz-in20.00 kg-cm2.0 N-m 6.0V 152.8 oz-in11.00 kg-cm1.1 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.06 s/60°1,071.4 deg/s178.6 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Stainless Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 720 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-202BLH | Hobby |
12.6V 277.7 oz-in20.00 kg-cm2.0 N-m 7.2V 152.8 oz-in11.00 kg-cm1.1 N-m |
12.6V 0.03 s/60°1,875.0 deg/s312.5 RPM 7.2V 0.05 s/60°1,132.1 deg/s188.7 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 720 Hz | Magnetic Encoder | PWM | (add) | 7.2–12.6 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-351BLC | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 6.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Multi-turn | (add) | — | — | ||
| OCServo | OCS-352BL | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-352BLH | Hobby |
12.6V 486.1 oz-in35.00 kg-cm3.4 N-m 7.2V 347.2 oz-in25.00 kg-cm2.5 N-m |
12.6V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.2V 0.08 s/60°800.0 deg/s133.3 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 7.2–12.6 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-451BL | Hobby |
8.4V 624.9 oz-in45.00 kg-cm4.4 N-m 6.0V 416.6 oz-in30.00 kg-cm2.9 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
2.8–2.8 A2800–2800 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | Waterproof | RoHS | (add) | (add) | China | — | Boxed | (add) | — | — | — | — | — | — | — | 0.320 A @ 6.0V320 mA @ 6.0V | (add) | (add) | — | — | ||
| OCServo | OCS-751BL | Hobby |
8.4V 1,041.6 oz-in75.00 kg-cm7.4 N-m 6.0V 736.0 oz-in53.00 kg-cm5.2 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
6–9 A6000–9000 mA | 3.10 oz88.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-851BL | Hobby |
16.8V 1,180.4 oz-in85.00 kg-cm8.3 N-m 8.4V 583.3 oz-in42.00 kg-cm4.1 N-m |
16.8V 0.11 s/60°545.5 deg/s90.9 RPM 8.4V 0.17 s/60°352.9 deg/s58.8 RPM |
4–6 A4000–6000 mA | 3.25 oz92.0 g | 1.57×0.79×1.68 in 39.9×20.1×42.7 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 8.4–16.8 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D1002 | Robotics |
30.0V 2,083.1 oz-in150.00 kg-cm14.7 N-m 28.0V 1,805.4 oz-in130.00 kg-cm12.7 N-m 24.0V 1,388.7 oz-in100.00 kg-cm9.8 N-m |
30.0V 0.12 s/60°500.0 deg/s83.3 RPM 28.0V 0.15 s/60°400.0 deg/s66.7 RPM 24.0V 0.20 s/60°300.0 deg/s50.0 RPM |
6.5–10 A6500–10000 mA | 6.70 oz190.0 g | 2.40×1.18×2.38 in 61.0×30.0×60.5 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | 10 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | OCS-D2001 | Hobby |
16.8V 3,055.2 oz-in220.00 kg-cm21.6 N-m 12.6V 2,222.0 oz-in160.00 kg-cm15.7 N-m 8.4V 1,666.5 oz-in120.00 kg-cm11.8 N-m |
16.8V 0.15 s/60°400.0 deg/s66.7 RPM 12.6V 0.20 s/60°300.0 deg/s50.0 RPM 8.4V 0.26 s/60°230.8 deg/s38.5 RPM |
6.5–10 A6500–10000 mA | 14.11 oz400.0 g | 2.52×1.29×3.64 in 64.0×32.8×92.5 mm | — | Giant | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 8.4–16.8 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D2002 | Robotics |
30.0V 3,471.8 oz-in250.00 kg-cm24.5 N-m 28.0V 3,194.1 oz-in230.00 kg-cm22.6 N-m 24.0V 2,777.5 oz-in200.00 kg-cm19.6 N-m |
30.0V 0.13 s/60°461.5 deg/s76.9 RPM 28.0V 0.20 s/60°300.0 deg/s50.0 RPM 24.0V 0.29 s/60°206.9 deg/s34.5 RPM |
10–15 A10000–15000 mA | 14.29 oz405.0 g | 2.52×1.30×3.48 in 64.0×33.0×88.4 mm | (add) | Giant | Aluminum | Brushless | (add) | Steel | 25 | 5 | Digital | Counterclockwise | 90° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | Magnetic Encoder | CAN / PWM | (add) | 24–30 V | (add) | (add) | -20–60°C-4.0–140.0°F | Splashproof | (add) | J30J-9TJL | 500 mm19.69 in | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | 0.400 A @ 30.0V400 mA @ 30.0V | Positional | 0.060 A60 mA | (add) | (add) | ||
| OCServo | OCS-D2007 | Hobby |
8.4V 277.7 oz-in20.00 kg-cm2.0 N-m 6.0V 194.4 oz-in14.00 kg-cm1.4 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.80 oz51.0 g | 1.41×0.59×1.38 in 35.8×15.0×35.1 mm | — | Standard | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 3.00–7.34 W | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D2507 | Hobby |
8.4V 347.2 oz-in25.00 kg-cm2.5 N-m 6.0V 243.0 oz-in17.50 kg-cm1.7 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.29 oz65.0 g | 1.61×0.81×1.12 in 40.9×20.6×28.4 mm | — | Low Profile | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D4001 | Robotics |
30.0V 5,416.1 oz-in390.00 kg-cm38.2 N-m 28.0V 4,999.5 oz-in360.00 kg-cm35.3 N-m 24.0V 4,444.0 oz-in320.00 kg-cm31.4 N-m |
30.0V 0.16 s/60°375.0 deg/s62.5 RPM 28.0V 0.20 s/60°300.0 deg/s50.0 RPM 24.0V 0.28 s/60°214.3 deg/s35.7 RPM |
5–7 A5000–7000 mA | 21.52 oz610.0 g | 2.68×1.38×4.72 in 68.1×35.1×119.9 mm | (add) | Giant | Aluminum | Brushless | (add) | Steel | (add) | 6 | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -30–65°C-22.0–149.0°F | Waterproof | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | 0.400 A @ 30.0V400 mA @ 30.0V | Continuous | 0.060 A60 mA | (add) | (add) | ||
| OCServo | OCS-D4009 | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.29 oz65.0 g | 1.61×0.81×1.12 in 40.9×20.6×28.4 mm | — | Low Profile | Aluminum | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D6501 | Robotics | 30.0V 9,026.8 oz-in650.00 kg-cm63.7 N-m |
30.0V 0.21 s/60°285.7 deg/s47.6 RPM 28.0V 0.24 s/60°250.0 deg/s41.7 RPM 24.0V 0.30 s/60°200.0 deg/s33.3 RPM |
18–22.5 A18000–22500 mA | 31.61 oz896.0 g | 3.94×1.97×3.82 in 100.1×50.0×97.0 mm | (add) | Giant | Aluminum | Brushless | (add) | Steel | (add) | 8 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 79.48 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | OCS-D9501 | Robotics |
30.0V 13,193.0 oz-in950.00 kg-cm93.2 N-m 28.0V 12,776.4 oz-in920.00 kg-cm90.2 N-m 24.0V 11,804.3 oz-in850.00 kg-cm83.4 N-m |
30.0V 0.25 s/60°240.0 deg/s40.0 RPM 28.0V 0.28 s/60°214.3 deg/s35.7 RPM 24.0V 0.35 s/60°171.4 deg/s28.6 RPM |
21–26.5 A21000–26500 mA | 61.73 oz1,750.0 g | 4.72×2.36×4.39 in 119.9×59.9×111.5 mm | (add) | Giant | Aluminum | Brushless | (add) | Steel | 25 | 10 | Digital | (add) | 90° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -20–60°C-4.0–140.0°F | Splashproof | (add) | (add) | 500 mm19.69 in | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | 0.500 A @ 30.0V500 mA @ 30.0V | Positional | 0.060 A60 mA | (add) | (add) | ||
| OCServo | ROBS-201 | Robotics |
12.0V 347.2 oz-in25.00 kg-cm2.5 N-m 9.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
(add) | 3.5–4 A3500–4000 mA | 2.75 oz78.0 g | 1.83×1.12×1.34 in 46.5×28.4×34.0 mm | (add) | Large | Aluminum | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | (add) | 9–12 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | China | — | Boxed | (add) | (add) | (add) | 38.4 Kbps–1 Mbps | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | ROBS-401 | Robotics |
12.0V 555.5 oz-in40.00 kg-cm3.9 N-m 9.6V 416.6 oz-in30.00 kg-cm2.9 N-m |
12.0V 0.22 s/60°276.0 deg/s46.0 RPM | 3.5–4 A3500–4000 mA | 2.89 oz82.0 g | 1.83×1.12×1.34 in 46.5×28.4×34.0 mm | (add) | Large | Aluminum | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | (add) | 9–12 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | China | 4.72 W | Boxed | (add) | (add) | (add) | 38.4 Kbps–1 Mbps | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OMG | OMG-A3-25BM | Hobby | 7.4V 306.0 oz-in22.03 kg-cm2.2 N-m |
7.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 4.8V 0.07 s/60°923.1 deg/s153.8 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | — | Standard | Metal / Plastic | Brushless | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 333 Hz | (add) | (add) | No | 4.8–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 265 mm10.43 in | (add) | 12.04 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
Make: NSDRC
Stall Current: 3.6–5.8 A3600–5800 mA
Shaft Power: 7.82–22.91 W
Weight: 2.47 oz70.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.575×0.787×1.181 in 40.0×20.0×30.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: Direct
Regulator Type: Direct
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 220 mm8.66 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 3.5–6.6 A3500–6600 mA
Shaft Power: 6.16–20.34 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.539 in 40.0×20.0×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: 2S-4S LiPo
Regulator Type: Direct
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP67
Certification: (add)
Connector: JST
Wire Length: 310 mm12.20 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 4.1–6.2 A4100–6200 mA
Shaft Power: 5.06–13.73 W
Weight: 2.29 oz65.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.575×0.787×1.063 in 40.0×20.0×27.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 310 mm12.20 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 3.1–4.6 A3100–4600 mA
Shaft Power: 5.32–14.79 W
Weight: 2.26 oz64.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.575×0.787×1.063 in 40.0×20.0×27.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 320 mm12.60 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 3.1–4.3 A3100–4300 mA
Shaft Power: 15.78–31.76 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.524 in 40.0×20.0×38.7 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 220 mm8.66 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 720 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 720 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 7.2–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 7.2–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–2.8 A2800–2800 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: Waterproof
Certification: RoHS
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 6–9 A6000–9000 mA
Shaft Power: —
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 4–6 A4000–6000 mA
Shaft Power: —
Weight: 3.25 oz92.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.68 in 39.9×20.1×42.7 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 6.5–10 A6500–10000 mA
Shaft Power: —
Weight: 6.70 oz190.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.40×1.18×2.38 in 61.0×30.0×60.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 10
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: 6.5–10 A6500–10000 mA
Shaft Power: —
Weight: 14.11 oz400.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.29×3.64 in 64.0×32.8×92.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 10–15 A10000–15000 mA
Shaft Power: —
Weight: 14.29 oz405.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.30×3.48 in 64.0×33.0×88.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 5
Modulation: Digital
Direction: Counterclockwise
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN / PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Splashproof
Certification: (add)
Connector: J30J-9TJL
Wire Length: 500 mm19.69 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: (add)
Shaft Power: 3.00–7.34 W
Weight: 1.80 oz51.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.41×0.59×1.38 in 35.8×15.0×35.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 2.29 oz65.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.12 in 40.9×20.6×28.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 5–7 A5000–7000 mA
Shaft Power: —
Weight: 21.52 oz610.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.68×1.38×4.72 in 68.1×35.1×119.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: 6
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–65°C-22.0–149.0°F
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 2.29 oz65.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.12 in 40.9×20.6×28.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 18–22.5 A18000–22500 mA
Shaft Power: 79.48 W
Weight: 31.61 oz896.0 g
Size Class: Giant
Diameter: —
Dimensions: 3.94×1.97×3.82 in 100.1×50.0×97.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: 8
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: 21–26.5 A21000–26500 mA
Shaft Power: —
Weight: 61.73 oz1,750.0 g
Size Class: Giant
Diameter: —
Dimensions: 4.72×2.36×4.39 in 119.9×59.9×111.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 10
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Splashproof
Certification: (add)
Connector: (add)
Wire Length: 500 mm19.69 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: 3.5–4 A3500–4000 mA
Shaft Power: —
Weight: 2.75 oz78.0 g
Size Class: Large
Diameter: —
Dimensions: 1.83×1.12×1.34 in 46.5×28.4×34.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: (add)
Op. Voltage: 9–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: 3.5–4 A3500–4000 mA
Shaft Power: 4.72 W
Weight: 2.89 oz82.0 g
Size Class: Large
Diameter: —
Dimensions: 1.83×1.12×1.34 in 46.5×28.4×34.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: (add)
Op. Voltage: 9–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OMG
Stall Current: (add)
Shaft Power: 12.04 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: Metal / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.