Discover XQ-Power Servos in Our eBay Store!
Shop NowOMG Servos (38)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| OMG | OMG-A3-25BM | Hobby |
7.4V 331.0 oz-in23.83 kg-cm2.3 N-m 6.0V 306.0 oz-in22.03 kg-cm2.2 N-m 4.8V 257.0 oz-in18.51 kg-cm1.8 N-m |
7.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 4.8V 0.07 s/60°923.1 deg/s153.8 RPM |
(add) | (add) | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | — | Standard | Metal / Plastic | Brushless | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 333 Hz | (add) | (add) | No | 4.8–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 265 mm10.43 in | (add) | 7.31–13.02 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-A3-35BM | Hobby |
8.4V 486.0 oz-in35.00 kg-cm3.4 N-m 7.4V 458.0 oz-in32.98 kg-cm3.2 N-m |
8.4V 0.08 s/60°800.0 deg/s133.3 RPM 7.4V 0.08 s/60°769.2 deg/s128.2 RPM |
(add) | (add) | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | — | Standard | Metal / Plastic | Brushless | (add) | Stainless steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 333 Hz | (add) | (add) | No | 7.4–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 265 mm10.43 in | (add) | 10.86–11.98 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D1-15S | Hobby |
7.4V 208.0 oz-in14.98 kg-cm1.5 N-m 6.0V 167.0 oz-in12.03 kg-cm1.2 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | (add) | 1.61×0.79×1.18 in 40.9×20.1×30.0 mm | — | Standard | Metal / Plastic | Brushed | (add) | Stainless steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | Yes | 6–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 2.81–4.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D1-20S | Hobby |
7.4V 278.0 oz-in20.02 kg-cm2.0 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | (add) | 1.61×0.79×1.18 in 40.9×20.1×30.0 mm | — | Standard | Metal / Plastic | Brushed | (add) | Stainless steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | Yes | 6–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 3.30–3.95 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D2-10DF | Hobby |
6.0V 167.0 oz-in12.03 kg-cm1.2 N-m 4.8V 139.0 oz-in10.01 kg-cm1.0 N-m |
6.0V 0.07 s/60°810.8 deg/s135.1 RPM 4.8V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | (add) | 1.61×0.79×1.02 in 40.9×20.1×25.9 mm | — | Low Profile | Metal / Plastic | Brushed | (add) | Stainless steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | No | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 3.02–4.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-12BF | Hobby |
8.4V 194.0 oz-in13.97 kg-cm1.4 N-m 7.4V 167.0 oz-in12.03 kg-cm1.2 N-m 6.0V 139.0 oz-in10.01 kg-cm1.0 N-m 4.8V 111.0 oz-in7.99 kg-cm0.8 N-m |
8.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,090.9 deg/s181.8 RPM 4.8V 0.07 s/60°923.1 deg/s153.8 RPM |
≤3.2 A≤3200 mA | 1.87 oz53.0 g | 1.61×0.81×1.02 in 40.9×20.6×25.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.16–7.97 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-16BF | Hobby |
8.4V 250.0 oz-in18.00 kg-cm1.8 N-m 7.4V 236.0 oz-in16.99 kg-cm1.7 N-m 6.0V 208.0 oz-in14.98 kg-cm1.5 N-m 4.8V 180.0 oz-in12.96 kg-cm1.3 N-m |
8.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°800.0 deg/s133.3 RPM |
≤3.2 A≤3200 mA | 1.87 oz53.0 g | 1.61×0.81×1.02 in 40.9×20.6×25.9 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.44–8.40 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-20BF | Hobby |
8.4V 319.0 oz-in22.97 kg-cm2.3 N-m 7.4V 305.0 oz-in21.96 kg-cm2.2 N-m 6.0V 278.0 oz-in20.02 kg-cm2.0 N-m 4.8V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
≤3.2 A≤3200 mA | 2.05 oz58.0 g | 1.61×0.81×1.14 in 40.9×20.6×29.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 6.60–11.80 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-30BF | Hobby |
8.4V 430.0 oz-in30.96 kg-cm3.0 N-m 7.4V 416.0 oz-in29.96 kg-cm2.9 N-m 6.0V 375.0 oz-in27.00 kg-cm2.6 N-m 4.8V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°923.1 deg/s153.8 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°800.0 deg/s133.3 RPM |
≤3.2 A≤3200 mA | 2.05 oz58.0 g | 1.61×0.81×1.14 in 40.9×20.6×29.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.55–13.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-D4-35BF | Hobby |
8.4V 472.0 oz-in33.99 kg-cm3.3 N-m 7.4V 444.0 oz-in31.97 kg-cm3.1 N-m 6.0V 416.0 oz-in29.96 kg-cm2.9 N-m 4.8V 375.0 oz-in27.00 kg-cm2.6 N-m |
8.4V 0.07 s/60°923.1 deg/s153.8 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°705.9 deg/s117.6 RPM |
≤3.2 A≤3200 mA | 2.05 oz58.0 g | 1.61×0.81×1.14 in 40.9×20.6×29.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 120° | 120 | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | BEC | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.16–13.43 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-H2-MCBF | Hobby |
7.4V 194.0 oz-in13.97 kg-cm1.4 N-m 6.0V 181.0 oz-in13.03 kg-cm1.3 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | (add) | 1.42×0.59×1.16 in 36.1×15.0×29.5 mm | — | Mini | Metal | Brushless | (add) | Stainless Steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 300 mm11.81 in | (add) | 3.94–4.48 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-H2-MTBF | Hobby |
7.4V 111.0 oz-in7.99 kg-cm0.8 N-m 6.0V 97.0 oz-in6.98 kg-cm0.7 N-m |
7.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 6.0V 0.06 s/60°1,090.9 deg/s181.8 RPM |
(add) | (add) | 1.42×0.59×1.16 in 36.1×15.0×29.5 mm | — | Mini | Metal | Brushless | (add) | Titanium | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 666 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 300 mm11.81 in | (add) | 3.26–4.56 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-H6-XCBF | Hobby |
8.4V 500.0 oz-in36.00 kg-cm3.5 N-m 7.4V 444.0 oz-in31.97 kg-cm3.1 N-m 6.0V 389.0 oz-in28.01 kg-cm2.7 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°882.4 deg/s147.1 RPM 6.0V 0.08 s/60°800.0 deg/s133.3 RPM |
(add) | (add) | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Metal | Brushless | (add) | Stainless Steel | 25 | Triple Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 333 Hz | (add) | (add) | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 300 mm11.81 in | (add) | 9.59–15.41 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-H6-XTBF | Hobby |
8.4V 306.0 oz-in22.03 kg-cm2.2 N-m 7.4V 278.0 oz-in20.02 kg-cm2.0 N-m 6.0V 264.0 oz-in19.01 kg-cm1.9 N-m |
8.4V 0.04 s/60°1,463.4 deg/s243.9 RPM 7.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 6.0V 0.05 s/60°1,153.8 deg/s192.3 RPM |
(add) | (add) | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Metal | Brushless | (add) | Stainless Steel | 25 | Triple Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 666 Hz | (add) | (add) | No | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 300 mm11.81 in | (add) | 9.39–13.80 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-LP-10DC | Hobby |
6.0V 167.0 oz-in12.03 kg-cm1.2 N-m 4.8V 139.0 oz-in10.01 kg-cm1.0 N-m |
6.0V 0.07 s/60°810.8 deg/s135.1 RPM 4.8V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | (add) | 1.61×0.79×1.02 in 40.9×20.1×25.9 mm | — | Low Profile | Metal / Plastic | Brushed | (add) | Stainless steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | No | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 3.02–4.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-LP-18DF | Hobby | 7.4V 250.0 oz-in18.00 kg-cm1.8 N-m | 7.4V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | (add) | 1.61×0.83×1.18 in 40.9×21.1×30.0 mm | — | Standard | Metal | Brushed | (add) | Stainless steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | Yes | 4.8–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 4.62 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MI-10CM | Hobby |
8.4V 108.0 oz-in7.78 kg-cm0.8 N-m 7.4V 99.0 oz-in7.13 kg-cm0.7 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | (add) | 1.40×0.59×1.15 in 35.6×15.0×29.2 mm | — | Mini | Metal / Plastic | Coreless | (add) | Titanium / Aluminum | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | Yes | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 2.15–2.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MI-15CF | Hobby |
7.4V 219.0 oz-in15.77 kg-cm1.5 N-m 6.0V 201.0 oz-in14.47 kg-cm1.4 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | (add) | 1.42×0.59×1.14 in 36.1×15.0×29.0 mm | — | Mini | Metal | Coreless | (add) | Titanium / Aluminum | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | No | 4.8–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 3.38–4.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MR-18CF | Hobby |
6.0V 25.0 oz-in1.80 kg-cm0.2 N-m 4.8V 22.0 oz-in1.58 kg-cm0.2 N-m |
6.0V 0.07 s/60°923.1 deg/s153.8 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | (add) | 0.79×0.44×0.87 in 20.1×11.2×22.1 mm | — | Micro | Metal | Coreless | (add) | Copper | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | No | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 0.58–0.71 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MR-20CF | Hobby |
8.4V 42.0 oz-in3.02 kg-cm0.3 N-m 7.4V 35.0 oz-in2.52 kg-cm0.2 N-m 6.0V 31.0 oz-in2.23 kg-cm0.2 N-m 4.8V 28.0 oz-in2.02 kg-cm0.2 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 6.0V 0.07 s/60°923.1 deg/s153.8 RPM 4.8V 0.07 s/60°833.3 deg/s138.9 RPM |
(add) | 0.25 oz7.0 g | 0.79×0.31×0.74 in 20.1×7.9×18.8 mm | — | Micro | Metal | Coreless | (add) | Titanium | 20 | (add) | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | Yes | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | JST-ZH | 60 mm2.36 in | (add) | 0.72–1.55 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MR-C3DM | Hobby |
6.0V 39.0 oz-in2.81 kg-cm0.3 N-m 4.8V 31.0 oz-in2.23 kg-cm0.2 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | (add) | (add) | — | Unknown | Plastic | Brushed | (add) | Titanium / Aluminum | 21 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.48–0.72 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MR-C4DC | Hobby |
8.4V 62.0 oz-in4.46 kg-cm0.4 N-m 7.4V 58.0 oz-in4.18 kg-cm0.4 N-m 6.0V 53.0 oz-in3.82 kg-cm0.4 N-m 4.8V 42.0 oz-in3.02 kg-cm0.3 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | (add) | (add) | — | Unknown | Plastic | Brushed | (add) | Titanium / Aluminum | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.52–1.15 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MR-HSCF | Hobby |
8.4V 114.0 oz-in8.21 kg-cm0.8 N-m 7.4V 94.0 oz-in6.77 kg-cm0.7 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | (add) | 0.91×0.47×1.08 in 23.1×11.9×27.4 mm | — | Micro | Metal | Coreless | (add) | Titanium / Aluminum | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | No | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 1.93–3.01 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-MR-O3DF | Hobby |
6.0V 44.0 oz-in3.17 kg-cm0.3 N-m 5.0V 35.0 oz-in2.52 kg-cm0.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | (add) | 0.91×0.51×1.02 in 23.1×13.0×25.9 mm | — | Micro | Metal | Brushed | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | (add) | No | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | Water Resistant | (add) | (add) | 180 mm7.09 in | (add) | 0.54–0.74 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OMG | OMG-R1-20DM | Hobby |
7.4V 319.0 oz-in22.97 kg-cm2.3 N-m 6.0V 306.0 oz-in22.03 kg-cm2.2 N-m |
7.4V 0.11 s/60°535.7 deg/s89.3 RPM 6.0V 0.13 s/60°472.4 deg/s78.7 RPM |
(add) | (add) | 1.61×0.79×1.57 in 40.9×20.1×39.9 mm | — | Standard | Plastic | Brushed | (add) | Stainless steel | 25 | Dual Bearings | (add) | (add) | 180° | 180 | (add) | 500–2500 µs | (add) | (add) | 333 Hz | (add) | (add) | No | 6–7.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | 300 mm11.81 in | (add) | 4.46–5.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: OMG
Stall Current: (add)
Shaft Power: 7.31–13.02 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: Metal / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 10.86–11.98 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: Metal / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 2.81–4.27 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.18 in 40.9×20.1×30.0 mm
Case Material: Metal / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.30–3.95 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.18 in 40.9×20.1×30.0 mm
Case Material: Metal / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.02–4.17 W
Weight: (add)
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.79×1.02 in 40.9×20.1×25.9 mm
Case Material: Metal / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 3.16–7.97 W
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.02 in 40.9×20.6×25.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 4.44–8.40 W
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.02 in 40.9×20.6×25.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 6.60–11.80 W
Weight: 2.05 oz58.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.14 in 40.9×20.6×29.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 8.55–13.25 W
Weight: 2.05 oz58.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.14 in 40.9×20.6×29.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: ≤3.2 A≤3200 mA
Shaft Power: 8.16–13.43 W
Weight: 2.05 oz58.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.14 in 40.9×20.6×29.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: 120
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.94–4.48 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.16 in 36.1×15.0×29.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.26–4.56 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.16 in 36.1×15.0×29.5 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 666 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 9.59–15.41 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Triple Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 9.39–13.80 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Triple Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 666 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.02–4.17 W
Weight: (add)
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.79×1.02 in 40.9×20.1×25.9 mm
Case Material: Metal / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 4.62 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.83×1.18 in 40.9×21.1×30.0 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 2.15–2.50 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.15 in 35.6×15.0×29.2 mm
Case Material: Metal / Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium / Aluminum
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 3.38–4.50 W
Weight: (add)
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.14 in 36.1×15.0×29.0 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium / Aluminum
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 0.58–0.71 W
Weight: (add)
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.44×0.87 in 20.1×11.2×22.1 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Copper
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 0.72–1.55 W
Weight: 0.25 oz7.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.31×0.74 in 20.1×7.9×18.8 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 20
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JST-ZH
Wire Length: 60 mm2.36 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 0.48–0.72 W
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Titanium / Aluminum
Gear Spline/Teeth: 21
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 0.52–1.15 W
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Titanium / Aluminum
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 1.93–3.01 W
Weight: (add)
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.1×11.9×27.4 mm
Case Material: Metal
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium / Aluminum
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 0.54–0.74 W
Weight: (add)
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.51×1.02 in 23.1×13.0×25.9 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OMG
Stall Current: (add)
Shaft Power: 4.46–5.27 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.57 in 40.9×20.1×39.9 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.