Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| DSServo | DS3225 SG | Hobby |
8.4V 416.6 oz-in30.00 kg-cm2.9 N-m 7.4V 347.2 oz-in25.00 kg-cm2.5 N-m 5.0V 291.6 oz-in21.00 kg-cm2.1 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 5.0V 0.14 s/60°428.6 deg/s71.4 RPM |
2.2–3.2 A2200–3200 mA | 2.12 oz60.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 275.000 | — | — | — | — | — | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | DS3230 MG | Hobby |
6.8V 416.6 oz-in30.00 kg-cm2.9 N-m 5.0V 361.1 oz-in26.00 kg-cm2.5 N-m |
6.8V 0.18 s/60°333.3 deg/s55.6 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
3.5–3.8 A3500–3800 mA | 2.12 oz60.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -25–70°C-13.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 221.000 | — | — | — | — | — | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | — | — | ||
| DSServo | DS3235 SG | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 5.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
1.9–3.2 A1900–3200 mA | 2.12 oz60.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | Aluminum / Plastic | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | Counterclockwise | 180° | 270 | (add) | 500–2500 µs | 1500 µs | 3 µs | 333 Hz | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP66 | CE | JR (Universal) | 300 mm11.81 in | China | 3.28–8.17 W | Boxed | — | — | 342.000 | — | — | — | — | — | (add) | Positional | 0.005 A5 mA | — | — | ||
| DSServo | DS3240 SG | Hobby |
6.8V 624.9 oz-in45.00 kg-cm4.4 N-m 5.0V 500.0 oz-in36.00 kg-cm3.5 N-m |
6.8V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
3.1–3.9 A3100–3900 mA | 2.12 oz60.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -25–70°C-13.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 342.000 | — | — | — | — | — | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | — | — | ||
| DSServo | DS3245 SG | Hobby |
8.4V 708.3 oz-in51.00 kg-cm5.0 N-m 7.4V 638.8 oz-in46.00 kg-cm4.5 N-m 6.0V 555.5 oz-in40.00 kg-cm3.9 N-m 5.0V 486.1 oz-in35.00 kg-cm3.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
3.5–5.8 A3500–5800 mA | 2.12 oz60.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 342.000 | — | — | — | — | — | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | DS51150 | Hobby |
12.6V 2,083.1 oz-in150.00 kg-cm14.7 N-m 12.0V 1,972.0 oz-in142.00 kg-cm13.9 N-m 10.0V 1,735.9 oz-in125.00 kg-cm12.3 N-m |
12.6V 0.19 s/60°315.8 deg/s52.6 RPM 12.0V 0.21 s/60°285.7 deg/s47.6 RPM 10.0V 0.24 s/60°250.0 deg/s41.7 RPM |
7.4–8.3 A7400–8300 mA | 6.17 oz175.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Brushed | (add) | Metal | 18 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 9–12.6 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 357.000 | — | — | — | — | — | 6.000 A @ 12.6V6,000 mA @ 12.6V | (add) | (add) | — | — | ||
| DSServo | DS5160 SSG | Hobby |
8.4V 972.1 oz-in70.00 kg-cm6.9 N-m 7.4V 902.7 oz-in65.00 kg-cm6.4 N-m 6.0V 805.5 oz-in58.00 kg-cm5.7 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
4.1–6.5 A4100–6500 mA | 5.57 oz158.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Brushed | (add) | Metal | 18 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 279.000 | — | — | — | — | — | 6.000 A @ 8.4V6,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | DS5180 SSG | Hobby |
8.4V 1,458.2 oz-in105.00 kg-cm10.3 N-m 7.4V 1,361.0 oz-in98.00 kg-cm9.6 N-m 6.0V 1,180.4 oz-in85.00 kg-cm8.3 N-m |
8.4V 0.19 s/60°315.8 deg/s52.6 RPM 7.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.24 s/60°250.0 deg/s41.7 RPM |
4.1–6.5 A4100–6500 mA | 5.57 oz158.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Brushed | (add) | Metal | 18 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | — | — | 357.000 | — | — | — | — | — | 6.000 A @ 8.4V6,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | RDS3218 | Robotics |
6.8V 347.2 oz-in25.00 kg-cm2.5 N-m 5.0V 298.6 oz-in21.50 kg-cm2.1 N-m |
6.8V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
1.6–2.5 A1600–2500 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3225 | Robotics |
6.8V 479.1 oz-in34.50 kg-cm3.4 N-m 5.0V 409.7 oz-in29.50 kg-cm2.9 N-m |
6.8V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
2.1–2.9 A2100–2900 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3230 | Robotics |
6.8V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 361.1 oz-in26.00 kg-cm2.5 N-m |
6.8V 0.19 s/60°319.1 deg/s53.2 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
3.5–3.8 A3500–3800 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 221.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3235 | Robotics |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 5.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
2.2–3.2 A2200–3200 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3245 | Robotics |
8.4V 708.3 oz-in51.00 kg-cm5.0 N-m 7.4V 638.8 oz-in46.00 kg-cm4.5 N-m 5.0V 486.1 oz-in35.00 kg-cm3.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
3.5–5.8 A3500–5800 mA | 2.12 oz60.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | (add) | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS5160 | Robotics |
8.4V 972.1 oz-in70.00 kg-cm6.9 N-m 7.4V 902.7 oz-in65.00 kg-cm6.4 N-m 6.0V 805.5 oz-in58.00 kg-cm5.7 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
4.1–6.5 A4100–6500 mA | 5.75 oz163.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | (add) | Giant | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 279.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS5180 | Robotics |
8.4V 1,458.2 oz-in105.00 kg-cm10.3 N-m 7.4V 1,361.0 oz-in98.00 kg-cm9.6 N-m 6.0V 1,180.4 oz-in85.00 kg-cm8.3 N-m |
8.4V 0.19 s/60°315.8 deg/s52.6 RPM 7.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.24 s/60°250.0 deg/s41.7 RPM |
4.1–6.5 A4100–6500 mA | 5.75 oz163.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | (add) | Giant | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | ≤70°C≤158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 357.000 | (add) | (add) | (add) | (add) | (add) | 6.000 A @ 8.4V6,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DuraTrax | SX210MG * | Hobby |
6.0V 95.0 oz-in6.84 kg-cm0.7 N-m 4.8V 76.0 oz-in5.47 kg-cm0.5 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.12 oz60.1 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.78–1.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D5000 | Hobby | 4.8V 125.0 oz-in9.00 kg-cm0.9 N-m | 4.8V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.22 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D6000 | Hobby | 4.8V 185.0 oz-in13.32 kg-cm1.3 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.90 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D6500 | Hobby | 4.8V 140.0 oz-in10.08 kg-cm1.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.05 oz58.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.29 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D7000 | Hobby | 4.8V 150.0 oz-in10.80 kg-cm1.1 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.54 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D7500 * | Hobby | 4.8V 172.0 oz-in12.39 kg-cm1.2 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.08 oz59.0 g | 1.61×0.87×1.26 in 41.0×22.0×32.0 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.59 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D8000 | Hobby | 4.8V 190.0 oz-in13.68 kg-cm1.3 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 41.0×20.0×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.95 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | DXP | Hobby | 6.0V 150.0 oz-in10.80 kg-cm1.1 N-m | 6.0V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.12 oz60.0 g | 1.61×0.87×1.26 in 41.0×22.0×32.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dynamixel | 2XC430-W250-T | Robotics |
12.0V 18.4 oz-in1.32 kg-cm0.1 N-m 11.1V 16.3 oz-in1.18 kg-cm0.1 N-m 9.0V 13.3 oz-in0.95 kg-cm0.1 N-m |
12.0V 0.16 s/60°384.6 deg/s64.1 RPM 11.1V 0.17 s/60°355.0 deg/s59.2 RPM 9.0V 0.21 s/60°288.5 deg/s48.1 RPM |
1100–1400 A1100000–1400000 mA | 3.60 oz102.0 g | 1.83×1.12×1.42 in 46.5×28.5×36.0 mm | (add) | Large | Plastic | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 360° | 360 | (add) | (add) | (add) | (add) | (add) | Contactless Absolute Encoder | TTL-PID | Yes | 6.5–14.8 V | (add) | (add) | -5–72°C23.0–161.6°F | (add) | (add) | JST | 180 mm7.09 in | (add) | 0.12–0.22 W | Boxed | 4.8 mm | 4,096 p/r | 257.400 | 9.6 Kbps–4.5 Mbps | (add) | (add) | ARM CORTEX-M3 | Velocity, Position, Extended Position, PWM | 1.400 A @ 12.0V1,400 mA @ 12.0V | (add) | 49.000 A49,000 mA | (add) | 5V | ||
| Dynamixel | 2XL430-W250-T | Robotics |
12.0V 15.3 oz-in1.10 kg-cm0.1 N-m 11.1V 14.3 oz-in1.03 kg-cm0.1 N-m 9.0V 10.2 oz-in0.73 kg-cm0.1 N-m |
12.0V 0.16 s/60°365.9 deg/s61.0 RPM 11.1V 0.18 s/60°342.9 deg/s57.1 RPM 9.0V 0.21 s/60°281.7 deg/s46.9 RPM |
1000–1400 A1000000–1400000 mA | 3.46 oz98.2 g | 1.83×1.42×1.42 in 46.5×36.0×36.0 mm | (add) | Large | Plastic | Cored | (add) | Metal | (add) | Dual Bearings | Digital | Bidirectional | 360° | 360 | (add) | (add) | 2048 µs | (add) | (add) | Contactless Absolute Encoder | TTL-PID | Yes | 6.5–12 V | (add) | (add) | -5–72°C23.0–161.6°F | (add) | FCC | KC | CE | ROHS | JST | 180 mm7.09 in | (add) | 0.09–0.17 W | Boxed | 12.0 mm | 4,096 p/r | 257.400 | 9.6 Kbps–4.5 Mbps | 1.4 W | 20.0 N | ARM CORTEX-M3 | Velocity, Position, Extended Position, PWM | 1.400 A @ 12.0V1,400 mA @ 12.0V | (add) | 49.000 A49,000 mA | (add) | 3.3V | ||
Make: DSServo
Stall Current: 2.2–3.2 A2200–3200 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 275.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–3.8 A3500–3800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -25–70°C-13.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 221.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 1.9–3.2 A1900–3200 mA
Shaft Power: 3.28–8.17 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: Aluminum / Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: 270
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP66
Certification: CE
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.1–3.9 A3100–3900 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -25–70°C-13.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–5.8 A3500–5800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 7.4–8.3 A7400–8300 mA
Shaft Power: —
Weight: 6.17 oz175.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 18
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 357.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.57 oz158.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 18
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 279.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.57 oz158.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 18
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 357.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 1.6–2.5 A1600–2500 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 2.1–2.9 A2100–2900 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–3.8 A3500–3800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 221.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 2.2–3.2 A2200–3200 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–5.8 A3500–5800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.75 oz163.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 279.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.75 oz163.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤70°C≤158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 357.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DuraTrax
Stall Current: (add)
Shaft Power: 0.78–1.17 W
Weight: 2.12 oz60.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.22 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.90 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.29 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.54 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.59 W
Weight: 2.08 oz59.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.87×1.26 in 41.0×22.0×32.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.95 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 41.0×20.0×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.39 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.87×1.26 in 41.0×22.0×32.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dynamixel
Stall Current: 1100–1400 A1100000–1400000 mA
Shaft Power: 0.12–0.22 W
Weight: 3.60 oz102.0 g
Size Class: Large
Diameter: —
Dimensions: 1.83×1.12×1.42 in 46.5×28.5×36.0 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Contactless Absolute Encoder
Control System: TTL-PID
Programmable: Yes
Op. Voltage: 6.5–14.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–72°C23.0–161.6°F
Water Rating: (add)
Certification: (add)
Connector: JST
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 4.8 mm
Resolution: 4,096 p/r
Gear Ratio: 257.400
Baud Rate: 9.6 Kbps–4.5 Mbps
Output Power: —
Radial Load: —
MCU: ARM CORTEX-M3
Operating Modes: Velocity, Position, Extended Position, PWM
Make: Dynamixel
Stall Current: 1000–1400 A1000000–1400000 mA
Shaft Power: 0.09–0.17 W
Weight: 3.46 oz98.2 g
Size Class: Large
Diameter: —
Dimensions: 1.83×1.42×1.42 in 46.5×36.0×36.0 mm
Case Material: Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: 360°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 2048 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Contactless Absolute Encoder
Control System: TTL-PID
Programmable: Yes
Op. Voltage: 6.5–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–72°C23.0–161.6°F
Water Rating: (add)
Certification: FCC | KC | CE | ROHS
Connector: JST
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: 12.0 mm
Resolution: 4,096 p/r
Gear Ratio: 257.400
Baud Rate: 9.6 Kbps–4.5 Mbps
Output Power: 1.4 W
Radial Load: 20.0 N
MCU: ARM CORTEX-M3
Operating Modes: Velocity, Position, Extended Position, PWM
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.