Discover XQ-Power Servos in Our eBay Store!

Shop Now
DSServo DS3225 MG
Standard

DSServo DS3225 MG

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-21
Identity
Brand DSServo
Product Number DS3225MG
Category Hobby
Performance
Torque
6.8V 347.25 oz-in
5.0V 291.69 oz-in
Speed
6.8V 0.14 sec/60°
5.0V 0.16 sec/60°
Running Current
6.8V 5.000 A
5.0V 4.000 A
Stall Current 2.1–2.9 AAverage
Physical
Weight 2.12 ozAverage
Dimensions L 1.57 in
W 0.79 in
H 1.59 in
Case Material Aluminum / Plastic
Drivetrain
Motor Type Brushed
Gears Copper / Aluminum
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Counterclockwise
Rotational Range 180°
Pulse Width 500-2500 µs
Neutral Position 1500 µs
Dead Band 3 µs
Angle Sensor Potentiometer
Control System PWM
Programmable No
Electrical & Environment
Operating Voltage 4.8–6.8 V
Temperature -25–70 °C
Water Rating IP66
Idle Current 0.005 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm
Origin
Country of Origin China

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

WeightAverage
Lighter than 59% of 1879 Digital Standard servos
Stall CurrentAverage
Lower draw than 60% of 570 Digital Standard servos

Performance Analysis

Shaft Power 3.37–4.59 W
Power Density2.326 W/in³
More power-dense than 50% of 1767 Digital Standard servos
Torque Density4.8615 oz-in/g
Torque-to-Volume Ratio147.91 oz-in/in³
Speed-to-Weight0.10417 (1/sec·g)
Speed-Torque Trade-off46.67
Current-per-Torque Ratio0.0099 A/oz-in
Idle-to-Running Current Ratio0.001
No-Load vs Stall Current Spread0.73
Voltage Range Width2.0 V
Wider voltage range than 40% of 1559 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0015
Finer dead band than 48% of 504 Digital Standard servos

Similar Active Servos

Reviews (25)

Includes 25 reviews aggregated from around the web.

There are few reviews for this servo on the web. A German forum member ran one for 30 minutes carrying a 500 g hammer and saw no issues, and a video tester says both the DS3218 and DS3225 did well in testing and can be recommended. The line is described as hugely popular with scale crawler builders because of price and waterproofing.

Be the first to review!

Submit a review of DSServo DS3225 MG