Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| CubeMars | AK10-9 V3.0 KV60 | Robotics | 48.0V 7,505.4 oz-in540.45 kg-cm53.0 N-m | 48.0V 0.03 s/60°1,935.5 deg/s322.6 RPM | ≤31.9 A≤31900 mA | 33.16 oz940.0 g | 2.429×—×— in61.7×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 9.000 | (add) | 442.0 W | (add) | (add) | Servo, MIT | 10.700 A @ 48.0V10,700 mA @ 48.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK40-10 KV170 | Robotics | 24.0V 580.6 oz-in41.81 kg-cm4.1 N-m | 24.0V 0.02 s/60°2,608.7 deg/s434.8 RPM | ≤7.3 A≤7300 mA | 6.53 oz185.0 g | 1.457×—×— in37.0×—×— mm | 53.0 mm2.09 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | CE | XT30 | (add) | China | — | Cylindrical | (add) | 16,384 p/r | 10.000 | (add) | 59.0 W | (add) | (add) | Servo, MIT | 2.700 A @ 24.0V2,700 mA @ 24.0V | Multi-turn | (add) | 0.300° | (add) | ||
| CubeMars | AK45-10 KV75 | Robotics | 24.0V 991.3 oz-in71.38 kg-cm7.0 N-m | 24.0V 0.06 s/60°1,071.4 deg/s178.6 RPM | ≤5 A≤5000 mA | 9.17 oz260.0 g | 1.693×—×— in43.0×—×— mm | 53.0 mm2.09 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | FOC | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | CE | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 10.000 | (add) | 39.0 W | (add) | (add) | Servo, MIT | 2.100 A @ 24.0V2,100 mA @ 24.0V | Multi-turn | (add) | 0.300° | (add) | ||
| CubeMars | AK45-36 KV80 * | Robotics | 24.0V 1,132.8 oz-in81.57 kg-cm8.0 N-m | 24.0V 0.25 s/60°240.0 deg/s40.0 RPM | ≤6.5 A≤6500 mA | 11.99 oz340.0 g | 2.126×—×— in54.0×—×— mm | 55.0 mm2.17 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | IP55 | CE | ISO | XT30 | (add) | China | 8.38 W | Cylindrical | (add) | 16,384 p/r | 36.000 | (add) | 33.0 W | (add) | (add) | Servo, MIT | 2.000 A @ 24.0V2,000 mA @ 24.0V | Multi-turn | (add) | 0.200° | (add) | ||
| CubeMars | AK60-39 V3.0 KV80 | Robotics | 48.0V 10,196.1 oz-in734.20 kg-cm72.0 N-m | 48.0V 0.10 s/60°588.2 deg/s98.0 RPM | ≤17 A≤17000 mA | 26.46 oz750.0 g | 2.638×—×— in67.0×—×— mm | 79.0 mm3.11 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | China | — | Cylindrical | (add) | 2,097,150 p/r | 39.000 | (add) | 176.0 W | (add) | (add) | Servo, MIT | 4.500 A @ 48.0V4,500 mA @ 48.0V | Multi-turn | (add) | 0.250° | (add) | ||
| CubeMars | AK60-6 V1.1 KV80 | Robotics | 24.0V 1,274.5 oz-in91.77 kg-cm9.0 N-m | 24.0V 0.03 s/60°1,935.5 deg/s322.6 RPM | ≤13.1 A≤13100 mA | 12.98 oz368.0 g | 1.555×—×— in39.5×—×— mm | 79.0 mm3.11 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 6.000 | (add) | 0.6 W | (add) | (add) | Servo, MIT | 3.800 A @ 24.0V3,800 mA @ 24.0V | Multi-turn | (add) | 0.550° | (add) | ||
| CubeMars | AK60-6 V3.0 KV80 | Robotics | 28.0V 1,274.5 oz-in91.77 kg-cm9.0 N-m |
48.0V 0.02 s/60°3,750.0 deg/s625.0 RPM 24.0V 0.03 s/60°1,935.5 deg/s322.6 RPM |
≤11.2 A≤11200 mA | 13.40 oz380.0 g | 1.693×—×— in43.0×—×— mm | 79.0 mm3.11 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 2,097,150 p/r | 6.000 | (add) | 74.0 W | (add) | (add) | Servo, MIT | 3.800 A @ 48.0V3,800 mA @ 48.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK70-10 KV100 | Robotics | 48.0V 3,512.0 oz-in252.89 kg-cm24.8 N-m |
48.0V 0.02 s/60°2,857.1 deg/s476.2 RPM 24.0V 0.04 s/60°1,428.6 deg/s238.1 RPM |
≤23.2 A≤23200 mA | 21.91 oz621.0 g | 1.978×—×— in50.2×—×— mm | 89.0 mm3.50 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN / Serial | Yes | 24–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | CE | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 10.000 | (add) | 230.0 W | (add) | (add) | Servo, MIT | 7.200 A @ 48.0V7,200 mA @ 48.0V | Multi-turn | (add) | 0.200° | (add) | ||
| CubeMars | AK70-9 KV60 | Robotics | 48.0V 4,135.1 oz-in297.76 kg-cm29.2 N-m | 48.0V 0.03 s/60°1,935.5 deg/s322.6 RPM | ≤23.8 A≤23800 mA | 19.05 oz540.0 g | 1.811×—×— in46.0×—×— mm | 89.0 mm3.50 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 9.000 | (add) | 230.0 W | (add) | (add) | Servo, MIT | 23.800 A @ 48.0V23,800 mA @ 48.0V | Multi-turn | (add) | 0.300° | (add) | ||
| CubeMars | AK80-6 KV100 | Robotics | 48.0V 1,699.3 oz-in122.37 kg-cm12.0 N-m | 48.0V 0.01 s/60°4,615.4 deg/s769.2 RPM | ≤20 A≤20000 mA | 17.11 oz485.0 g | 1.516×—×— in38.5×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN / Serial | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 6.000 | (add) | 340.0 W | (add) | (add) | Position, Velocity, Torque | 9.700 A @ 48.0V9,700 mA @ 48.0V | Multi-turn | (add) | 0.220° | (add) | ||
| CubeMars | AK80-64 KV80 | Robotics | 48.0V 16,993.4 oz-in1,223.66 kg-cm120.0 N-m |
48.0V 0.21 s/60°288.5 deg/s48.1 RPM 24.0V 0.44 s/60°137.9 deg/s23.0 RPM |
≤19 A≤19000 mA | 29.98 oz850.0 g | 2.437×—×— in61.9×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | 151.06 W | Cylindrical | (add) | 16,384 p/r | 64.000 | (add) | 220.0 W | (add) | (add) | Servo, MIT | 7.000 A @ 48.0V7,000 mA @ 48.0V | Multi-turn | (add) | 0.180° | (add) | ||
| CubeMars | AK80-8 KV60 | Robotics | 48.0V 3,540.3 oz-in254.93 kg-cm25.0 N-m | 48.0V 0.03 s/60°2,142.9 deg/s357.1 RPM | ≤21 A≤21000 mA | 20.11 oz570.0 g | 1.728×—×— in43.9×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 8.000 | (add) | 230.0 W | (add) | (add) | Servo, MIT | 6.900 A @ 48.0V6,900 mA @ 48.0V | Multi-turn | (add) | 0.380° | (add) | ||
| CubeMars | AK80-9 KV100 | Robotics | 48.0V 2,549.0 oz-in183.55 kg-cm18.0 N-m | 48.0V 0.03 s/60°2,307.7 deg/s384.6 RPM | ≤22.3 A≤22300 mA | 17.11 oz485.0 g | 1.516×—×— in38.5×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | China | 181.27 W | Cylindrical | (add) | 16,384 p/r | 9.000 | (add) | 330.0 W | (add) | (add) | Servo, MIT | 10.300 A @ 48.0V10,300 mA @ 48.0V | Multi-turn | (add) | 0.190° | (add) | ||
| CubeMars | AK80-9 V3.0 KV100 | Robotics | 48.0V 3,115.5 oz-in224.34 kg-cm22.0 N-m | 48.0V 0.02 s/60°3,333.3 deg/s555.6 RPM | ≤28 A≤28000 mA | 17.28 oz490.0 g | 1.516×—×— in38.5×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 65,536 p/r | 9.000 | (add) | 368.0 W | (add) | (add) | Servo, MIT | 12.000 A @ 48.0V12,000 mA @ 48.0V | Multi-turn | (add) | 0.250° | (add) | ||
| CubeMars | AKA10-9 KV60 | Robotics | 48.0V 7,505.4 oz-in540.45 kg-cm53.0 N-m | 48.0V 0.03 s/60°1,935.5 deg/s322.6 RPM | ≤32 A≤32000 mA | 37.39 oz1,060.0 g | 2.756×—×— in70.0×—×— mm | 100.0 mm3.94 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | Custom | (add) | (add) | — | Cylindrical | (add) | (add) | 9.000 | (add) | 205.0 W | 490.3 N | (add) | Servo, MIT | 10.600 A @ 48.0V10,600 mA @ 48.0V | Multi-turn | (add) | 0.150° | (add) | ||
| CubeMars | AKA60-6 KV80 | Robotics | 48.0V 1,274.5 oz-in91.77 kg-cm9.0 N-m |
48.0V 0.02 s/60°3,750.0 deg/s625.0 RPM 24.0V 0.03 s/60°1,935.5 deg/s322.6 RPM |
≤11.2 A≤11200 mA | 16.23 oz460.0 g | 2.016×—×— in51.2×—×— mm | 80.0 mm3.15 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | Custom | (add) | (add) | — | Cylindrical | (add) | (add) | 6.000 | (add) | 62.0 W | 176.5 N | (add) | Servo, MIT | 0.600 A @ 48.0V600 mA @ 48.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AKE60-8 KV80 | Robotics | 24.0V 1,770.2 oz-in127.46 kg-cm12.5 N-m | 24.0V 0.04 s/60°1,428.6 deg/s238.1 RPM | ≤12 A≤12000 mA | 9.17 oz260.0 g | 0.984×—×— in25.0×—×— mm | 69.0 mm2.72 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | (add) | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | (add) | 8.000 | (add) | 95.0 W | (add) | (add) | Current, Position, Velocity | 4.800 A @ 24.0V4,800 mA @ 24.0V | Multi-turn | (add) | 0.150° | (add) | ||
| CubeMars | AKE80-8 KV30 | Robotics | 48.0V 4,248.4 oz-in305.92 kg-cm30.0 N-m | 48.0V 0.05 s/60°1,176.5 deg/s196.1 RPM | ≤12 A≤12000 mA | 20.11 oz570.0 g | 1.26×—×— in32.0×—×— mm | 87.0 mm3.43 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | FOC | (add) | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | (add) | 8.000 | (add) | 188.0 W | (add) | (add) | (add) | 4.800 A @ 48.0V4,800 mA @ 48.0V | Multi-turn | (add) | 0.150° | (add) | ||
| CubeMars | AKE90-8 KV35 | Robotics | 48.0V 24,074.0 oz-in1,733.52 kg-cm170.0 N-m | 48.0V 0.05 s/60°1,250.0 deg/s208.3 RPM | ≤72 A≤72000 mA | 49.38 oz1,400.0 g | 1.713×—×— in43.5×—×— mm | 107.5 mm4.23 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | FOC | (add) | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | (add) | 8.000 | (add) | 700.0 W | (add) | (add) | (add) | 21.000 A @ 48.0V21,000 mA @ 48.0V | Multi-turn | (add) | 0.150° | (add) | ||
| CubeMars | AKH70-16 V1.0 KV41 | Robotics | 48.0V 11,045.7 oz-in795.38 kg-cm78.0 N-m | 48.0V 0.10 s/60°631.6 deg/s105.3 RPM | ≤23 A≤23000 mA | 31.01 oz879.0 g | 2.382×—×— in60.5×—×— mm | 90.0 mm3.54 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | China | 214.98 W | Cylindrical | (add) | 2,097,150 p/r | 16.000 | (add) | 245.0 W | (add) | (add) | Servo, MIT | 6.500 A @ 48.0V6,500 mA @ 48.0V | Multi-turn | (add) | 0.200° | (add) | ||
| CubeMars | AKH70-48 V1.0 KV41 | Robotics | 48.0V 31,437.9 oz-in2,263.77 kg-cm222.0 N-m | 48.0V 0.29 s/60°209.8 deg/s35.0 RPM | ≤21 A≤21000 mA | 49.24 oz1,396.0 g | 3.209×—×— in81.5×—×— mm | 90.0 mm3.54 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | 7.0 mm | 2,097,150 p/r | 48.000 | (add) | 217.0 W | (add) | (add) | Servo, MIT | 6.000 A @ 48.0V6,000 mA @ 48.0V | Multi-turn | (add) | 0.200° | (add) | ||
| CubeMars | G100 KV10 | Robotics | 24.0V 1,090.4 oz-in78.52 kg-cm7.7 N-m | 24.0V 0.04 s/60°1,500.0 deg/s250.0 RPM | (add) | 33.65 oz954.0 g | 1.996×—×— in50.7×—×— mm | 102.7 mm4.04 in | Custom | (add) | Brushless | FET | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | FOC | (add) | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | IP45 | (add) | (add) | (add) | (add) | 50.40 W | Cylindrical | (add) | (add) | 1.000 | (add) | (add) | (add) | (add) | Position, Velocity | 2.400 A @ 24.0V2,400 mA @ 24.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | G35 KV100 | Robotics | 16.0V 21.2 oz-in1.53 kg-cm0.1 N-m | 16.0V 0.01 s/60°5,405.4 deg/s900.9 RPM | ≤4.5 A≤4500 mA | 5.61 oz159.0 g | 1.224×—×— in31.1×—×— mm | 40.0 mm1.57 in | Standard | (add) | Brushless | FET | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | FOC | (add) | 16–16 V | (add) | (add) | -20–50°C-4.0–122.0°F | IP45 | (add) | (add) | (add) | China | 3.54 W | Cylindrical | (add) | (add) | 1.000 | (add) | (add) | (add) | (add) | Position, Velocity | 1.450 A @ 16.0V1,450 mA @ 16.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | G40 KV70 | Robotics | 16.0V 35.4 oz-in2.55 kg-cm0.2 N-m | 16.0V 0.02 s/60°3,592.8 deg/s598.8 RPM | (add) | 5.75 oz163.0 g | 1.224×—×— in31.1×—×— mm | 44.0 mm1.73 in | Large | (add) | Brushless | FET | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | FOC | (add) | 16–16 V | (add) | (add) | -20–50°C-4.0–122.0°F | IP45 | (add) | (add) | (add) | China | 3.92 W | Cylindrical | (add) | (add) | 1.000 | (add) | 12.0 W | (add) | (add) | Position, Velocity | 1.650 A @ 16.0V1,650 mA @ 16.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | G60 KV25 | Robotics | 24.0V 247.8 oz-in17.85 kg-cm1.8 N-m | 24.0V 0.02 s/60°3,157.9 deg/s526.3 RPM | (add) | 8.11 oz230.0 g | 1.50×—×— in38.1×—×— mm | 44.0 mm1.73 in | Custom | (add) | Brushless | FET | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | FOC | (add) | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | IP45 | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | (add) | 1.000 | (add) | (add) | (add) | (add) | Position, Velocity | 3.100 A @ 24.0V3,100 mA @ 24.0V | Multi-turn | (add) | (add) | (add) | ||
Make: CubeMars
Stall Current: ≤31.9 A≤31900 mA
Shaft Power: —
Weight: 33.16 oz940.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: 2.429×3.858×3.858 in 61.7×98.0×98.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 442.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤7.3 A≤7300 mA
Shaft Power: —
Weight: 6.53 oz185.0 g
Size Class: Custom
Diameter: 53.0 mm2.09 in
Dimensions: 1.457×2.087×2.087 in 37.0×53.0×53.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: CE
Connector: XT30
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 10.000
Baud Rate: —
Output Power: 59.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤5 A≤5000 mA
Shaft Power: —
Weight: 9.17 oz260.0 g
Size Class: Custom
Diameter: 53.0 mm2.09 in
Dimensions: 1.693×2.087×2.087 in 43.0×53.0×53.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: FOC
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: CE
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 10.000
Baud Rate: —
Output Power: 39.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤6.5 A≤6500 mA
Shaft Power: 8.38 W
Weight: 11.99 oz340.0 g
Size Class: Custom
Diameter: 55.0 mm2.17 in
Dimensions: 2.126×2.165×2.165 in 54.0×55.0×55.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: IP55
Certification: CE | ISO
Connector: XT30
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 36.000
Baud Rate: —
Output Power: 33.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤17 A≤17000 mA
Shaft Power: —
Weight: 26.46 oz750.0 g
Size Class: Custom
Diameter: 79.0 mm3.11 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: 2,097,150 p/r
Gear Ratio: 39.000
Baud Rate: —
Output Power: 176.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤13.1 A≤13100 mA
Shaft Power: —
Weight: 12.98 oz368.0 g
Size Class: Custom
Diameter: 79.0 mm3.11 in
Dimensions: 1.555×3.11×3.11 in 39.5×79.0×79.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 6.000
Baud Rate: —
Output Power: 0.6 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤11.2 A≤11200 mA
Shaft Power: —
Weight: 13.40 oz380.0 g
Size Class: Custom
Diameter: 79.0 mm3.11 in
Dimensions: 1.693×3.11×3.11 in 43.0×79.0×79.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 2,097,150 p/r
Gear Ratio: 6.000
Baud Rate: —
Output Power: 74.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤23.2 A≤23200 mA
Shaft Power: —
Weight: 21.91 oz621.0 g
Size Class: Custom
Diameter: 89.0 mm3.50 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN / Serial
Programmable: Yes
Op. Voltage: 24–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: CE
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 10.000
Baud Rate: —
Output Power: 230.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤23.8 A≤23800 mA
Shaft Power: —
Weight: 19.05 oz540.0 g
Size Class: Custom
Diameter: 89.0 mm3.50 in
Dimensions: 1.811×3.504×3.504 in 46.0×89.0×89.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 230.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤20 A≤20000 mA
Shaft Power: —
Weight: 17.11 oz485.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: 1.516×3.858×3.858 in 38.5×98.0×98.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN / Serial
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 6.000
Baud Rate: —
Output Power: 340.0 W
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque
Make: CubeMars
Stall Current: ≤19 A≤19000 mA
Shaft Power: 151.06 W
Weight: 29.98 oz850.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 64.000
Baud Rate: —
Output Power: 220.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤21 A≤21000 mA
Shaft Power: —
Weight: 20.11 oz570.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: 1.728×3.858×3.858 in 43.9×98.0×98.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 8.000
Baud Rate: —
Output Power: 230.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤22.3 A≤22300 mA
Shaft Power: 181.27 W
Weight: 17.11 oz485.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: 1.516×3.858×3.858 in 38.5×98.0×98.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 330.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤28 A≤28000 mA
Shaft Power: —
Weight: 17.28 oz490.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: 1.516×3.858×3.858 in 38.5×98.0×98.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 65,536 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 368.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤32 A≤32000 mA
Shaft Power: —
Weight: 37.39 oz1,060.0 g
Size Class: Custom
Diameter: 100.0 mm3.94 in
Dimensions: 2.756×3.937×3.937 in 70.0×100.0×100.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: Custom
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 9.000
Baud Rate: —
Output Power: 205.0 W
Radial Load: 490.3 N
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤11.2 A≤11200 mA
Shaft Power: —
Weight: 16.23 oz460.0 g
Size Class: Custom
Diameter: 80.0 mm3.15 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: Custom
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 6.000
Baud Rate: —
Output Power: 62.0 W
Radial Load: 176.5 N
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤12 A≤12000 mA
Shaft Power: —
Weight: 9.17 oz260.0 g
Size Class: Custom
Diameter: 69.0 mm2.72 in
Dimensions: 0.984×2.717×2.717 in 25.0×69.0×69.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: (add)
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 8.000
Baud Rate: —
Output Power: 95.0 W
Radial Load: —
MCU: —
Operating Modes: Current, Position, Velocity
Make: CubeMars
Stall Current: ≤12 A≤12000 mA
Shaft Power: —
Weight: 20.11 oz570.0 g
Size Class: Custom
Diameter: 87.0 mm3.43 in
Dimensions: 1.26×3.43×3.43 in 32.0×87.1×87.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: FOC
Programmable: (add)
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 8.000
Baud Rate: —
Output Power: 188.0 W
Radial Load: —
MCU: —
Operating Modes: —
Make: CubeMars
Stall Current: ≤72 A≤72000 mA
Shaft Power: —
Weight: 49.38 oz1,400.0 g
Size Class: Custom
Diameter: 107.5 mm4.23 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: FOC
Programmable: (add)
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 8.000
Baud Rate: —
Output Power: 700.0 W
Radial Load: —
MCU: —
Operating Modes: —
Make: CubeMars
Stall Current: ≤23 A≤23000 mA
Shaft Power: 214.98 W
Weight: 31.01 oz879.0 g
Size Class: Custom
Diameter: 90.0 mm3.54 in
Dimensions: 2.382×3.543×3.543 in 60.5×90.0×90.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: 2,097,150 p/r
Gear Ratio: 16.000
Baud Rate: —
Output Power: 245.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤21 A≤21000 mA
Shaft Power: —
Weight: 49.24 oz1,396.0 g
Size Class: Custom
Diameter: 90.0 mm3.54 in
Dimensions: 3.209×3.543×3.543 in 81.5×90.0×90.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 7.0 mm
Resolution: 2,097,150 p/r
Gear Ratio: 48.000
Baud Rate: —
Output Power: 217.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: (add)
Shaft Power: 50.40 W
Weight: 33.65 oz954.0 g
Size Class: Custom
Diameter: 102.7 mm4.04 in
Dimensions: 1.996×4.52×4.52 in 50.7×114.8×114.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: FET
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: FOC
Programmable: (add)
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: IP45
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 1.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: CubeMars
Stall Current: ≤4.5 A≤4500 mA
Shaft Power: 3.54 W
Weight: 5.61 oz159.0 g
Size Class: Standard
Diameter: 40.0 mm1.57 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: FET
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: FOC
Programmable: (add)
Op. Voltage: 16–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: IP45
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 1.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: CubeMars
Stall Current: (add)
Shaft Power: 3.92 W
Weight: 5.75 oz163.0 g
Size Class: Large
Diameter: 44.0 mm1.73 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: FET
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: FOC
Programmable: (add)
Op. Voltage: 16–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: IP45
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 1.000
Baud Rate: —
Output Power: 12.0 W
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: CubeMars
Stall Current: (add)
Shaft Power: —
Weight: 8.11 oz230.0 g
Size Class: Custom
Diameter: 44.0 mm1.73 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: FET
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: FOC
Programmable: (add)
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: IP45
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: —
Gear Ratio: 1.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.