Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hitec | HS-805BB | Hobby |
6.0V 343.0 oz-in24.70 kg-cm2.4 N-m 4.8V 275.0 oz-in19.80 kg-cm1.9 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 5.36 oz152.0 g | 2.60×1.18×2.27 in 66.0×30.0×57.7 mm | — | Giant | Plastic | 3-pole | (add) | Plastic | 24 | Dual Bearings | Analog | Clockwise | 90° | (add) | 20 ms | 900–2100 µs | 1500 µs | 8 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | S | 300 mm11.81 in | (add) | 2.68–4.53 W | — | 8.0 mm | — | — | — | — | — | — | Position | 0.700 A @ 6.0V700 mA @ 6.0V | Positional | 0.008 A8 mA | — | 3-5V | ||
| Hitec | HS-805MG | Hobby |
6.0V 343.0 oz-in24.70 kg-cm2.4 N-m 4.8V 275.0 oz-in19.80 kg-cm1.9 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
4.8–6 A4800–6000 mA | 6.95 oz197.0 g | 2.60×1.18×2.27 in 66.0×30.0×57.7 mm | — | Giant | Plastic | 3-pole | (add) | Metal | 15 | Dual Bearings | Analog | Clockwise | 80° | 199 | 20 ms | 553–2455 µs | (add) | 8 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 2.68–4.53 W | — | (add) | — | — | — | — | — | — | — | 0.830 A @ 6.0V830 mA @ 6.0V | Positional | 0.008 A8 mA | — | 3-5V | ||
| Hitec | HS-81 | Hobby |
6.0V 42.0 oz-in3.02 kg-cm0.3 N-m 4.8V 36.0 oz-in2.59 kg-cm0.3 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
≤1.5 A≤1500 mA | 0.59 oz16.6 g | 1.17×0.47×1.16 in 29.7×11.9×29.5 mm | — | Mini | Plastic | 3-pole | (add) | Nylon | 15 | Bushing | Analog | Clockwise | 80° | 165 | 20 ms | 900–2100 µs | 1500 µs | 8 µs | 50 Hz | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | Not Rated | (add) | JR (Universal) | 160 mm6.30 in | Philippines | 0.61–0.86 W | — | (add) | — | — | — | — | — | — | Position | 0.280 A @ 6.0V280 mA @ 6.0V | Positional | 0.009 A9 mA | — | 3-5V | ||
| Hitec | HS-815BB * | Hobby |
6.0V 343.0 oz-in24.70 kg-cm2.4 N-m 4.8V 275.0 oz-in19.80 kg-cm1.9 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 5.36 oz152.0 g | 2.59×1.18×2.26 in 65.8×30.0×57.4 mm | — | Large | (add) | 3-pole | (add) | Nylon | 15 | Dual Bearings | Analog | Clockwise | 200° | 200 | 20 ms | 920–2100 µs | 1500 µs | 8 µs | 50 Hz | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | S | 300 mm11.81 in | (add) | 2.68–4.53 W | — | (add) | — | — | — | — | — | — | — | 0.830 A @ 6.0V830 mA @ 6.0V | Positional | (add) | — | 3-5V | ||
| Hitec | HS-81MG * | Hobby |
6.0V 41.6 oz-in3.00 kg-cm0.3 N-m 4.8V 36.1 oz-in2.60 kg-cm0.3 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.67 oz19.0 g | 1.17×0.47×1.16 in 29.7×11.9×29.5 mm | — | Mini | (add) | 3-pole | (add) | Plastic | 15 | Bushing | Analog | Clockwise | 80° | (add) | 20 ms | 900–2100 µs | 1500 µs | 8 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | S | 160 mm6.30 in | Philippines | 0.61–0.85 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.009 A9 mA | — | 3-5V | ||
| Hitec | HS-82HD * | Hobby |
6.0V 47.2 oz-in3.40 kg-cm0.3 N-m 4.8V 38.8 oz-in2.79 kg-cm0.3 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.58 oz16.4 g | 1.17×0.47×1.16 in 29.7×11.9×29.5 mm | — | Mini | (add) | 3-pole | (add) | Plastic | 15 | Bushing | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.60–0.87 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-82MG | Hobby |
6.0V 47.0 oz-in3.38 kg-cm0.3 N-m 4.8V 39.0 oz-in2.81 kg-cm0.3 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
1.45–1.8 A1450–1800 mA | 0.66 oz18.7 g | 1.17×0.47×1.16 in 29.7×11.9×29.5 mm | — | Mini | Plastic | 3-pole | (add) | Metal | 15 | Bushing | Analog | Clockwise | 40° | (add) | 20 ms | 900–2100 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | S | 250 mm9.84 in | (add) | 0.60–0.87 W | — | 5.8 mm | — | — | — | — | — | — | — | 0.280 A @ 6.0V280 mA @ 6.0V | Positional | 0.010 A10 mA | — | 3-5V | ||
| Hitec | HS-8330SH * | Hobby |
7.4V 181.0 oz-in13.03 kg-cm1.3 N-m 6.0V 139.0 oz-in10.01 kg-cm1.0 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°705.9 deg/s117.6 RPM |
(add) | 2.33 oz66.0 g | 1.57×0.78×1.46 in 39.9×19.8×37.1 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.02–4.78 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8335SH * | Hobby |
7.4V 333.0 oz-in23.98 kg-cm2.4 N-m 6.0V 257.0 oz-in18.51 kg-cm1.8 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.26 oz64.0 g | 1.57×0.78×1.46 in 39.9×19.8×37.1 mm | — | Standard | (add) | Coreless | FET | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.97–4.74 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8360TH * | Hobby |
7.4V 229.0 oz-in16.49 kg-cm1.6 N-m 6.0V 187.0 oz-in13.47 kg-cm1.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.40 oz68.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless Brushed | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | 200 Hz | (add) | PWM | No | 6–7.4 V | 2S LiPo | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.32–6.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8361TH * | Hobby |
7.4V 229.0 oz-in16.49 kg-cm1.6 N-m 6.0V 187.0 oz-in13.47 kg-cm1.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.75 oz78.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.32–6.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8370TH * | Hobby |
7.4V 319.0 oz-in22.97 kg-cm2.3 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.29 oz65.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | Water Resistant | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.85–5.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8380TH * | Hobby |
7.4V 486.0 oz-in35.00 kg-cm3.4 N-m 6.0V 403.0 oz-in29.02 kg-cm2.8 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.40 oz68.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless Brushed | FET | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.97–6.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8381TH * | Hobby |
7.4V 486.0 oz-in35.00 kg-cm3.4 N-m 6.0V 403.0 oz-in29.02 kg-cm2.8 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.75 oz78.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.38–6.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-8385TH * | Hobby |
7.4V 486.0 oz-in35.00 kg-cm3.4 N-m 6.0V 403.0 oz-in29.02 kg-cm2.8 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.40 oz68.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Giant | (add) | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.38–6.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-85BB | Hobby |
6.0V 49.0 oz-in3.53 kg-cm0.3 N-m 4.8V 42.0 oz-in3.02 kg-cm0.3 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
≤1.2 A≤1200 mA | 0.67 oz19.0 g | 1.14×0.51×1.18 in 29.0×13.0×30.0 mm | — | Micro | Plastic | Cored | (add) | Nylon | 24 | Single Bearing | Analog | Clockwise | 120° | (add) | 20 ms | 553–2300 µs | (add) | 5 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | 0.49–0.65 W | — | (add) | — | — | — | — | — | — | — | 0.280 A @ 6.0V280 mA @ 6.0V | Positional | 0.008 A8 mA | — | 3-5V | ||
| Hitec | HS-85MG | Hobby |
6.0V 48.6 oz-in3.50 kg-cm0.3 N-m 4.8V 41.7 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
≤1.2 A≤1200 mA | 0.77 oz21.8 g | 1.14×0.51×1.18 in 29.0×13.0×30.0 mm | — | Mini | Plastic | 3-pole | (add) | Metal | 24 | Single Bearing | Analog | Clockwise | 180° | 180 | 20 ms | 550–2300 µs | 1500 µs | 8 µs | (add) | Potentiometer | PWM | No | 4.8–6 V | External | Direct | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 160 mm6.30 in | (add) | 0.48–0.64 W | — | 6.0 mm | — | — | — | — | — | — | — | 0.260 A @ 6.0V260 mA @ 6.0V | Positional | 0.008 A8 mA | — | 3-5V | ||
| Hitec | HS-8775MG * | Hobby |
6.0V 125.0 oz-in9.00 kg-cm0.9 N-m 4.8V 100.0 oz-in7.20 kg-cm0.7 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
≤3 A≤3000 mA | 1.59 oz45.0 g | 1.59×0.83×1.00 in 40.4×21.1×25.4 mm | — | Low Profile | Plastic | Coreless Brushed | (add) | Titanium | 25 | Dual Bearings | Digital | Clockwise | (add) | (add) | 20 ms | 900–2100 µs | 1500 µs | 1 µs | 50 Hz | (add) | PWM | No | 4.8–6 V | (add) | (add) | (add) | Water Resistant | (add) | JR (Universal) | (add) | (add) | 1.54–2.31 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.010 A10 mA | — | — | ||
| Hitec | HS-900SGS * | Hobby |
14.9V 1,208.0 oz-in86.99 kg-cm8.5 N-m 11.1V 903.0 oz-in65.02 kg-cm6.4 N-m |
14.9V 0.15 s/60°400.0 deg/s66.7 RPM 11.1V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 12.80 oz363.0 g | 2.52×1.30×2.87 in 64.0×33.0×72.9 mm | — | Giant | Aluminum | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | No | 11.1–14.8 V | LiPo | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.35–14.89 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-925MG * | Hobby |
6.0V 106.9 oz-in7.70 kg-cm0.8 N-m 4.8V 66.7 oz-in4.80 kg-cm0.5 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.00 oz56.7 g | 1.55×0.78×1.48 in 39.4×19.8×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Analog | Clockwise | (add) | (add) | 20 ms | 900–2100 µs | 1500 µs | (add) | 50 Hz | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.62–1.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-945MG * | Hobby |
6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 122.2 oz-in8.80 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.97 oz55.9 g | 1.55×0.78×1.48 in 39.4×19.8×37.6 mm | — | Standard | (add) | Coreless | MOS | Metal | 24 | Dual Bearings | Analog | Clockwise | 90° | (add) | 20 ms | 900–2100 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | No | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | Waterproof | (add) | S | 300 mm11.81 in | (add) | 1.41–2.35 W | — | (add) | — | — | — | — | — | — | Position | 0.500 A @ 6.0V500 mA @ 6.0V | Positional | 0.007 A7 mA | — | 3-5V | ||
| Hitec | HS-965MG * | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 4.8V 111.1 oz-in8.00 kg-cm0.8 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Analog | Clockwise | (add) | (add) | 20 ms | 900–2100 µs | 1500 µs | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | S | (add) | (add) | 1.58–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-985MG * | Hobby |
6.0V 172.2 oz-in12.40 kg-cm1.2 N-m 4.8V 133.3 oz-in9.60 kg-cm0.9 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
2.4–3 A2400–3000 mA | 2.19 oz62.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Coreless | FET | Metal | 24 | Dual Bearings | Analog | Clockwise | 80° | (add) | 20 ms | 900–2100 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | Water Resistant | (add) | Z | 300 mm11.81 in | (add) | 1.54–2.45 W | — | 5.8 mm | — | — | — | — | — | — | — | (add) | Positional | 0.003 A3 mA | — | 3-5V | ||
| Hitec | HS-M7990TH * | Hobby |
7.4V 611.0 oz-in44.00 kg-cm4.3 N-m 6.0V 500.0 oz-in36.00 kg-cm3.5 N-m |
7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.21 s/60°285.7 deg/s47.6 RPM |
8.1–9.9 A8100–9900 mA | 2.79 oz79.0 g | 1.72×0.88×1.58 in 43.8×22.4×40.0 mm | 6.0 mm0.24 in | Standard | Plastic / Aluminum | Coreless | FET | Titanium | 25 | Dual Bearings | Digital | Clockwise | 90° | 300 | (add) | 1050–1950 µs | 1500 µs | 2 µs | (add) | Magnetic Encoder | PWM | Yes | 6–7.4 V | 2S LiPo | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 4.40–6.65 W | — | (add) | — | — | — | — | — | — | Position | 0.480 A @ 7.4V480 mA @ 7.4V | Positional | 0.023 A23 mA | 0.500° | — | ||
| Hitec | HSB-9360TH | Hobby |
7.4V 236.0 oz-in16.99 kg-cm1.7 N-m 6.0V 236.0 oz-in16.99 kg-cm1.7 N-m |
7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
2.1–2.7 A2100–2700 mA | 2.40 oz68.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | Plastic / Aluminum | Brushless | MOS | Titanium | 25 | Dual Bearings | Digital | Clockwise | 119° | 119 | (add) | 700–2300 µs | 1500 µs | 1 µs | (add) | Potentiometer | PWM | Yes | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 5.45–7.27 W | — | (add) | — | — | — | — | — | — | — | 0.250 A @ 7.4V250 mA @ 7.4V | Positional | 0.027 A27 mA | — | 3-5V | ||
Make: Hitec
Stall Current: (add)
Shaft Power: 2.68–4.53 W
Weight: 5.36 oz152.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.60×1.18×2.27 in 66.0×30.0×57.7 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: S
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: 8.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: 4.8–6 A4800–6000 mA
Shaft Power: 2.68–4.53 W
Weight: 6.95 oz197.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.60×1.18×2.27 in 66.0×30.0×57.7 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: 199
Pulse Cycle: 20 ms
Pulse Width: 553–2455 µs
Neutral Pos.: (add)
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤1.5 A≤1500 mA
Shaft Power: 0.61–0.86 W
Weight: 0.59 oz16.6 g
Size Class: Mini
Diameter: —
Dimensions: 1.17×0.47×1.16 in 29.7×11.9×29.5 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 15
Rotation: Bushing
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: 165
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Not Rated
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: Philippines
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: (add)
Shaft Power: 2.68–4.53 W
Weight: 5.36 oz152.0 g
Size Class: Large
Diameter: —
Dimensions: 2.59×1.18×2.26 in 65.8×30.0×57.4 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 200°
Mech. Limit: 200
Pulse Cycle: 20 ms
Pulse Width: 920–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.61–0.85 W
Weight: 0.67 oz19.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.17×0.47×1.16 in 29.7×11.9×29.5 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Bushing
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 160 mm6.30 in
Country of Origin: Philippines
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: (add)
Shaft Power: 0.60–0.87 W
Weight: 0.58 oz16.4 g
Size Class: Mini
Diameter: —
Dimensions: 1.17×0.47×1.16 in 29.7×11.9×29.5 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 15
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 1.45–1.8 A1450–1800 mA
Shaft Power: 0.60–0.87 W
Weight: 0.66 oz18.7 g
Size Class: Mini
Diameter: —
Dimensions: 1.17×0.47×1.16 in 29.7×11.9×29.5 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Bushing
Modulation: Analog
Direction: Clockwise
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: 5.8 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 3.02–4.78 W
Weight: 2.33 oz66.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.46 in 39.9×19.8×37.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 2.97–4.74 W
Weight: 2.26 oz64.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.46 in 39.9×19.8×37.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.32–6.05 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless Brushed
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.32–6.05 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 3.85–5.90 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.97–6.91 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless Brushed
Motor Drive: FET
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.38–6.42 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.38–6.42 W
Weight: 2.40 oz68.0 g
Size Class: Giant
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤1.2 A≤1200 mA
Shaft Power: 0.49–0.65 W
Weight: 0.67 oz19.0 g
Size Class: Micro
Diameter: —
Dimensions: 1.14×0.51×1.18 in 29.0×13.0×30.0 mm
Case Material: Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 553–2300 µs
Neutral Pos.: (add)
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤1.2 A≤1200 mA
Shaft Power: 0.48–0.64 W
Weight: 0.77 oz21.8 g
Size Class: Mini
Diameter: —
Dimensions: 1.14×0.51×1.18 in 29.0×13.0×30.0 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Single Bearing
Modulation: Analog
Direction: Clockwise
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: 20 ms
Pulse Width: 550–2300 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: External
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: (add)
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤3 A≤3000 mA
Shaft Power: 1.54–2.31 W
Weight: 1.59 oz45.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.00 in 40.4×21.1×25.4 mm
Case Material: Plastic
Motor Type: Coreless Brushed
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 8.35–14.89 W
Weight: 12.80 oz363.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.30×2.87 in 64.0×33.0×72.9 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 11.1–14.8 V
Power Source: LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.62–1.80 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.78×1.48 in 39.4×19.8×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.41–2.35 W
Weight: 1.97 oz55.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.78×1.48 in 39.4×19.8×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: MOS
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Waterproof
Certification: (add)
Connector: S
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: (add)
Shaft Power: 1.58–2.57 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: S
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 2.4–3 A2400–3000 mA
Shaft Power: 1.54–2.45 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: Clockwise
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: Z
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: 5.8 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: 8.1–9.9 A8100–9900 mA
Shaft Power: 4.40–6.65 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: 6.0 mm0.24 in
Dimensions: 1.72×0.88×1.58 in 43.8×22.4×40.0 mm
Case Material: Plastic / Aluminum
Motor Type: Coreless
Motor Drive: FET
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 90°
Mech. Limit: 300
Pulse Cycle: (add)
Pulse Width: 1050–1950 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Hitec
Stall Current: 2.1–2.7 A2100–2700 mA
Shaft Power: 5.45–7.27 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: Plastic / Aluminum
Motor Type: Brushless
Motor Drive: MOS
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 119°
Mech. Limit: 119
Pulse Cycle: (add)
Pulse Width: 700–2300 µs
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.