Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-22
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 32805S |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
343.00 oz-in
24.70 kg-cm
2.4 N-m
4.8V
275.00 oz-in
19.80 kg-cm
1.9 N-m
Above Average
|
| Speed |
6.0V
0.14 sec/60°
428.6 deg/s
71.4 RPM
4.8V
0.19 sec/60°
315.8 deg/s
52.6 RPM
Above Average
|
| Running Current |
6.0V
0.830 A
830 mA
4.8V
0.700 A
700 mA
Average
|
| Stall Current | 4.8–6 A4800–6000 mAAverage |
| Physical | |
| Weight | 6.95 oz197.0 gBottom 10% |
| Dimensions |
L 2.60 in W 1.18 in H 2.27 in L 66.0 mm W 30.0 mm H 57.7 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | 3-pole |
| Gears | Metal |
| Gear Spline/Teeth | 15 T |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Analog |
| Direction | Clockwise |
| Rotational Range | 80° |
| Mechanical Limit | 199° |
| Pulse Cycle | 20 ms |
| Pulse Width | 553-2455 µs |
| Dead Band | 8 µs |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Programmable | No |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | IP54 |
| Idle Current | 0.008 A8 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 73% of 23 Analog Giant servos at 4.8V |
| Speed | Above Average Faster than 81% of 22 Analog Giant servos at 4.8V |
| Weight | Bottom 10% Lighter than 7% of 58 Analog Giant servos |
| Running Current | Average Lower draw than 38% of 35 Giant servos at 4.8V |
| Stall Current | Average Lower draw than 48% of 120 Giant servos |
Performance Analysis
| Shaft Power | 2.68–4.53 W |
| Power Density | 0.650 W/in³ More power-dense than 82% of 57 Analog Giant servos |
| Torque Density | 1.3959 oz-in/g Stronger than 41% of 23 Analog Giant servos |
| Torque-to-Volume Ratio | 39.49 oz-in/in³ Denser torque than 68% of 23 Analog Giant servos |
| Speed-to-Weight | 0.02672 (1/sec·g) Faster than 24% of 22 Analog Giant servos |
| Speed-Torque Trade-off | 52.25 Better balanced than 62% of 22 Analog Giant servos |
| Current-per-Torque Ratio | 0.0218 A/oz-in More efficient than 50% of 81 Hitec servos |
| Idle-to-Running Current Ratio | 0.011 Lower idle draw than 88% of 61 Hitec servos |
| No-Load vs Stall Current Spread | 8.57 Narrower current spread than 27% of 56 Hitec servos |
| Torque Gain per Volt | 20.61%/V More voltage-responsive (torque) than 55% of 21 Analog Giant servos |
| Speed Gain per Volt | 29.77%/V 3rd-highest speed gain per volt of 20 Analog Giant servos |
| Voltage Range Width | 1.2 V Wider voltage range than 27% of 23 Analog Giant servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0042 Finer dead band than 23% of 125 Hitec servos |
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are few reviews for this servo on the web. An InMoov robot builder on Reddit says Hitec servos are workhorses and recommends it and its sibling for the large joints.
Be the first to review!