Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-805BB
Giant

Hitec HS-805BB

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-16
Identity
Brand Hitec
Product Number 31805S
Category Hobby
Performance
Torque
6.0V 343.00 oz-in
4.8V 275.00 oz-in Above Average
Speed
6.0V 0.14 sec/60°
4.8V 0.19 sec/60° Top 10%
Running Current
6.0V 0.700 A
4.8V 0.700 A Average
Physical
Weight 5.36 ozAverage
Dimensions L 2.60 in
W 1.18 in
H 2.27 in
Case Material Plastic
Drivetrain
Motor Type 3-pole
Gears Plastic
Gear Spline/Teeth 24 T estimate
Shaft Size 8.0 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Analog
Direction Clockwise
Rotational Range 90°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 8 µs
Angle Sensor Potentiometer
Control System PWM
Programmable No
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Water Rating IP54
Idle Current 0.008 A
Connectivity
Connector S
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 70% of 24 Analog Giant servos at 4.8V
SpeedTop 10%
Faster than 91% of 23 Analog Giant servos at 4.8V
WeightAverage
Lighter than 38% of 59 Analog Giant servos
Running CurrentAverage
Lower draw than 41% of 35 Giant servos at 4.8V

Performance Analysis

Shaft Power 2.68–4.53 W
Power Density0.650 W/in³
More power-dense than 79% of 58 Analog Giant servos
Torque Density1.8092 oz-in/g
Stronger than 61% of 24 Analog Giant servos
Torque-to-Volume Ratio39.49 oz-in/in³
Denser torque than 65% of 24 Analog Giant servos
Speed-to-Weight0.03463 (1/sec·g)
Faster than 73% of 23 Analog Giant servos
Speed-Torque Trade-off52.25
Better balanced than 55% of 23 Analog Giant servos
Idle-to-Running Current Ratio0.011
Lower idle draw than 87% of 54 Hitec servos
Torque Gain per Volt20.61%/V
More voltage-responsive (torque) than 62% of 22 Analog Giant servos
Speed Gain per Volt29.77%/V
2nd-highest speed gain per volt of 21 Analog Giant servos
Voltage Range Width1.2 V
Wider voltage range than 39% of 24 Analog Giant servos
Dead-Band-to-Pulse-Width Ratio0.0067
Finer dead band than 5% of 118 Hitec servos

Similar Active Servos

Reviews (1)

  • Edson

    September 18, 2016

    Application(s): Robotic

    Comments: I need to control the robot arms and torso

Submit a review of Hitec HS-805BB