Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-09-14
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 32945 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
152.75 oz-in
11.00 kg-cm
1.1 N-m
4.8V
122.20 oz-in
8.80 kg-cm
0.9 N-m
Above Average
|
| Speed |
6.0V
0.12 sec/60°
500.0 deg/s
83.3 RPM
4.8V
0.16 sec/60°
375.0 deg/s
62.5 RPM
Above Average
|
| Running Current |
6.0V
0.500 A
500 mA
4.8V
0.400 A
400 mA
Below Average
|
| Physical | |
| Weight | 1.97 oz55.9 gBelow Average |
| Dimensions |
L 1.55 in W 0.78 in H 1.48 in L 39.4 mm W 19.8 mm H 37.6 mm |
| Drivetrain | |
| Motor Type | Coreless |
| Motor Drive | MOS |
| Gears | Metal |
| Gear Spline/Teeth | 24 T estimate |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Analog |
| Direction | Clockwise |
| Rotational Range | 90° |
| Pulse Cycle | 20 ms |
| Pulse Width | 900-2100 µs |
| Neutral Position | 1500 µs |
| Dead Band | 4 µs |
| Refresh Rate | 50 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Programmable | No |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | Waterproof |
| Idle Current | 0.007 A7 mA |
| Connectivity | |
| Connector | S |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 73% of 198 Analog Standard servos at 4.8V |
| Speed | Above Average Faster than 75% of 195 Analog Standard servos at 4.8V |
| Weight | Below Average Lighter than 25% of 448 Analog Standard servos |
| Running Current | Below Average Lower draw than 23% of 49 Analog Standard servos at 4.8V |
Performance Analysis
| Shaft Power | 1.41–2.35 W |
| Power Density | 1.315 W/in³ More power-dense than 90% of 433 Analog Standard servos |
| Torque Density | 2.1880 oz-in/g Stronger than 71% of 198 Analog Standard servos |
| Torque-to-Volume Ratio | 68.29 oz-in/in³ Denser torque than 80% of 198 Analog Standard servos |
| Speed-to-Weight | 0.11191 (1/sec·g) Faster than 53% of 195 Analog Standard servos |
| Speed-Torque Trade-off | 19.55 Better balanced than 70% of 195 Analog Standard servos |
| Idle-to-Running Current Ratio | 0.017 4th-highest idle-to-running current ratio of 38 Analog Standard servos |
| Torque Gain per Volt | 20.83%/V More voltage-responsive (torque) than 81% of 156 Analog Standard servos |
| Speed Gain per Volt | 27.78%/V 3rd-highest speed gain per volt of 156 Analog Standard servos |
| Voltage Range Width | 1.2 V Wider voltage range than 56% of 240 Analog Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0033 Finer dead band than 75% of 56 Analog Standard servos |
Similar Active Servos
Reviews of Hitec HS-945MG
Be the first to review!