Discover XQ-Power Servos in Our eBay Store!

Shop Now
Standard

Hitec HSB-9360TH

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-24
Identity
Brand Hitec
Product Number 39360
Category Hobby
Performance
Torque
7.4V 236.00 oz-in
6.0V 236.00 oz-in Average
Speed
7.4V 0.06 sec/60°
6.0V 0.08 sec/60° Above Average
Running Current
7.4V 0.250 A
6.0V 0.250 A Average
Stall Current 2.1–2.7 AAbove Average
Physical
Weight 2.40 ozAverage
Dimensions L 1.575 in
W 0.787 in
H 1.516 in
Case Material Plastic / Aluminum
Drivetrain
Motor Type Brushless
Motor Drive MOS
Gears Titanium
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 119°
Mechanical Limit 119°
Pulse Width 700-2300 µs
Neutral Position 1500 µs
Dead Band 1 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 6–7.4 V
Temperature -20–60 °C
Water Rating IP54
Idle Current 0.027 A
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAverage
Stronger than 54% of 1055 Digital Standard servos at 6.0V
SpeedAbove Average
Faster than 89% of 1038 Digital Standard servos at 6.0V
WeightAverage
Lighter than 39% of 1872 Digital Standard servos
Running CurrentAverage
Lower draw than 46% of 226 Digital Standard servos at 6.0V
Stall CurrentAbove Average
Lower draw than 71% of 569 Digital Standard servos

Performance Analysis

Shaft Power 5.45–7.27 W
Power Density3.870 W/in³
More power-dense than 70% of 1762 Digital Standard servos
Torque Density3.4706 oz-in/g
Stronger than 51% of 1048 Digital Standard servos
Torque-to-Volume Ratio125.59 oz-in/in³
Denser torque than 55% of 1053 Digital Standard servos
Speed-to-Weight0.18382 (1/sec·g)
Faster than 84% of 1031 Digital Standard servos
Speed-Torque Trade-off18.88
Better balanced than 33% of 1029 Digital Standard servos
Current-per-Torque Ratio0.0114 A/oz-in
More efficient than 70% of 330 Digital Standard servos
Idle-to-Running Current Ratio0.108
Lower idle draw than 34% of 167 Digital Standard servos
No-Load vs Stall Current Spread10.80
Narrower current spread than 72% of 179 Digital Standard servos
Torque Gain per Volt0.00%/V
More voltage-responsive (torque) than 0% of 868 Digital Standard servos
Speed Gain per Volt23.81%/V
More voltage-responsive (speed) than 92% of 868 Digital Standard servos
Voltage Range Width1.4 V
Wider voltage range than 33% of 1552 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0006
Finer dead band than 93% of 501 Digital Standard servos

Similar Active Servos

Reviews of Hitec HSB-9360TH

Be the first to review!

Submit a review of Hitec HSB-9360TH