Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Turnigy | HV-380 * | Hobby |
12.0V 144.4 oz-in10.40 kg-cm1.0 N-m 8.4V 101.4 oz-in7.30 kg-cm0.7 N-m |
12.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.79 oz79.0 g | 1.575×0.787×1.772 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | FET | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 3 ms | (add) | (add) | 0.8 µs | (add) | Potentiometer | PWM | (add) | 8.4–12 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 4.69–8.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-767 * | Hobby |
7.4V 430.5 oz-in31.00 kg-cm3.0 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
7.4V 0.12 s/60°508.5 deg/s84.7 RPM 6.0V 0.15 s/60°413.8 deg/s69.0 RPM |
(add) | 2.75 oz77.9 g | 1.575×0.787×1.772 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.43–6.75 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-1501MG | Hobby |
6.0V 236.1 oz-in17.00 kg-cm1.7 N-m 4.8V 215.3 oz-in15.50 kg-cm1.5 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.22 oz63.0 g | 1.602×0.807×1.555 in 40.7×20.5×39.5 mm | — | Standard | (add) | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | No | 4.8–6 V | (add) | (add) | (add) | Splashproof | (add) | JR (Universal) | (add) | (add) | 2.49–3.12 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| Turnigy | TGY-9150MG * | Hobby | 4.8V 219.4 oz-in15.80 kg-cm1.5 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.12 oz60.0 g | 1.602×0.787×1.661 in 40.7×20.0×42.2 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-AN13 | Hobby |
6.0V 201.3 oz-in14.49 kg-cm1.4 N-m 4.8V 183.2 oz-in13.19 kg-cm1.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.05 oz58.0 g | 1.575×0.787×1.476 in 40.0×20.0×37.5 mm | — | Standard | (add) | Brushless | (add) | Titanium | 25 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–2.86 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG958 * | Hobby |
6.0V 200.0 oz-in14.40 kg-cm1.4 N-m 4.8V 166.0 oz-in11.95 kg-cm1.2 N-m |
4.8V 0.20 s/60°300.0 deg/s50.0 RPM | ≤1.6 A≤1600 mA | 2.29 oz65.0 g | 1.583×0.791×1.449 in 40.2×20.1×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 45° | (add) | (add) | 1520–1900 µs | 1520 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 305 mm12.00 in | (add) | 1.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | 3-5V | ||
| Turnigy | TGY-MG959 * | Hobby |
6.0V 200.0 oz-in14.40 kg-cm1.4 N-m 4.8V 166.0 oz-in11.95 kg-cm1.2 N-m |
4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.75 oz78.0 g | 1.583×0.791×1.449 in 40.2×20.1×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 45° | (add) | (add) | (add) | 1520 µs | 1 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 320 mm12.60 in | (add) | 1.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-S8166M * | Hobby | 6.0V 458.3 oz-in33.00 kg-cm3.2 N-m | 6.0V 0.21 s/60°285.7 deg/s47.6 RPM | ≤3.8 A≤3800 mA | 5.43 oz154.0 g | 2.95×2.323×1.063 in 74.9×59.0×27.0 mm | — | Giant | Metal | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 60° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.04 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-WP23 | Hobby |
6.0V 319.2 oz-in22.99 kg-cm2.3 N-m 4.8V 249.8 oz-in17.99 kg-cm1.8 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
2.5–2.8 A2500–2800 mA | 2.65 oz75.0 g | 1.602×0.807×1.516 in 40.7×20.5×38.5 mm | — | Standard | Aluminum / Plastic | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.30–4.92 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.005 A5 mA | — | — | ||
| Unitree | A1 Motor | Robotics | 40.0V 4,744.0 oz-in341.60 kg-cm33.5 N-m | 40.0V 0.05 s/60°1,203.1 deg/s200.5 RPM | 20–40 A20000–40000 mA | 21.34 oz605.0 g | 3.15×—×— in80.0×—×— mm | 80.0 mm3.15 in | Custom | Aluminum | Brushless | FET | Steel | (add) | Dual Bearings | Digital | Bidirectional | (add) | (add) | (add) | (add) | (add) | 1 µs | 1000 Hz | Magnetic Encoder | RS485 | Yes | 20–40 V | External | (add) | -10–60°C14.0–140.0°F | IP68 | CE | (add) | 300 mm11.81 in | (add) | — | Cylindrical | 10.0 mm | 32,768 p/r | 9.100 | 4.8 Mbps | 260.0 W | 500.0 N | STM32 | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | 0.200 A200 mA | 0.050° | 5V | ||
| Unitree | B1-16 | Robotics | 64.0V 19,825.7 oz-in1,427.60 kg-cm140.0 N-m | 64.0V 0.07 s/60°895.5 deg/s149.3 RPM | 40–64.665 A40000–64665 mA | 61.38 oz1,740.0 g | 4.567×—×— in116.0×—×— mm | 116.0 mm4.57 in | Custom | Aluminum | Brushless | FET | Steel | (add) | Dual Bearings | Digital | Bidirectional | (add) | (add) | (add) | (add) | (add) | 1 µs | 1000 Hz | Absolute Encoder | CAN / RS485 | Yes | 36–64 V | External | (add) | -10–60°C14.0–140.0°F | IP68 | CE | (add) | 100 mm3.94 in | (add) | — | Cylindrical | 20.0 mm | 32,768 p/r | 16.000 | 4.8 Mbps | 500.0 W | 1,000.0 N | STM32 | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | 0.270 A270 mA | 0.050° | 5V | ||
| Unitree | GO-M8010-6 | Robotics | 24.0V 3,356.2 oz-in241.67 kg-cm23.7 N-m | 24.0V 0.04 s/60°1,714.3 deg/s285.7 RPM | ≤40 A≤40000 mA | 18.70 oz530.0 g | 3.799×—×— in96.5×—×— mm | 96.5 mm3.80 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6000 Hz | Absolute Encoder | RS485 | Yes | 12–30 V | (add) | (add) | -5–40°C23.0–104.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 6.330 | 4 Mbps | (add) | (add) | (add) | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | (add) | (add) | (add) | ||
| Unitree | IM6014 | Robotics | 60.0V 4,871.5 oz-in350.78 kg-cm34.4 N-m | 60.0V 0.02 s/60°3,157.9 deg/s526.3 RPM | ≤40 A≤40000 mA | 18.87 oz535.0 g | 2.362×—×— in60.0×—×— mm | 65.0 mm2.56 in | Custom | Aluminum / Plastic | Brushless | FET | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 400 Hz | Absolute Encoder | RS-485 | Yes | 24–75 V | (add) | (add) | -20–90°C-4.0–194.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 12.660 | 4 Mbps–6 Mbps | (add) | (add) | (add) | Position, Velocity, Torque | (add) | (add) | (add) | (add) | (add) | ||
| Vigor | VS-10A * | Hobby |
6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.47 oz70.0 g | 1.94×1.00×1.69 in 49.3×25.4×42.9 mm | — | Large | (add) | Brushed | (add) | Plastic | (add) | Dual Bearings | Analog | (add) | 170° | (add) | (add) | 800–2200 µs | 1500 µs | 5 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 250 mm9.84 in | (add) | 1.17–1.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Volz | Alu-Star * | Hobby |
6.0V 135.0 oz-in9.72 kg-cm1.0 N-m 4.8V 110.0 oz-in7.92 kg-cm0.8 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.50 oz70.9 g | 1.61×0.78×1.77 in 40.9×19.8×45.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.92–1.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Volz | DA 20-06-2503 * | Hobby | 6.0V 156.0 oz-in11.23 kg-cm1.1 N-m | 6.0V 0.12 s/60°500.0 deg/s83.3 RPM | ≤3 A≤3000 mA | 3.10 oz88.0 g | 1.64×0.80×1.79 in 41.7×20.3×45.5 mm | — | Standard | Aluminum / Plastic | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | 170 | 20 ms | 800–2200 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | Yes | 5–6 V | (add) | (add) | -30–70°C-22.0–158.0°F | Splashproof | (add) | (add) | 240 mm9.45 in | (add) | 2.40 W | — | (add) | — | — | — | — | — | — | — | 0.800 A @ 6.0V800 mA @ 6.0V | Positional | 0.010 A10 mA | 0.500° | — | |||
| Volz | DA 20-06-2505 * | Hobby | 6.0V 212.0 oz-in15.27 kg-cm1.5 N-m | 6.0V 0.19 s/60°315.8 deg/s52.6 RPM | ≤2.3 A≤2300 mA | 3.10 oz88.0 g | 1.64×0.80×1.79 in 41.7×20.3×45.5 mm | — | Standard | Aluminum / Plastic | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | 330 | 20 ms | 800–2200 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | Yes | 5–8 V | (add) | (add) | -30–70°C-22.0–158.0°F | Splashproof | (add) | FCI Mini-PV 65039-034LF-compatible, 3-pin | 240 mm9.45 in | (add) | 2.06 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.010 A10 mA | 0.500° | — | |||
| Volz | DA 20-12-2515 * | Hobby | 12.0V 226.6 oz-in16.31 kg-cm1.6 N-m | 12.0V 0.29 s/60°206.9 deg/s34.5 RPM | ≤0.8 A≤800 mA | 3.10 oz88.0 g | 1.64×1.815×0.815 in 41.7×46.1×20.7 mm | — | Standard | Aluminum / Plastic | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | 170 | 20 ms | 800–2200 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | Yes | 10–16 V | (add) | (add) | -30–70°C-22.0–158.0°F | Splashproof | (add) | (add) | 240 mm9.45 in | (add) | 1.44 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.010 A10 mA | 0.500° | — | |||
| Volz | DA 20-30-2515 * | Hobby | 28.0V 170.0 oz-in12.24 kg-cm1.2 N-m | 30.0V 0.12 s/60°500.0 deg/s83.3 RPM | ≤0.6 A≤600 mA | 3.10 oz88.0 g | 1.815×1.638×0.815 in 46.1×41.6×20.7 mm | — | Standard | Aluminum / Plastic | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | 170 | 20 ms | 800–2200 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | Yes | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | IP51 | (add) | (add) | 240 mm9.45 in | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.010 A10 mA | — | — | |||
| Volz | DA 22-06-2603 * | Hobby | 6.0V 679.7 oz-in48.94 kg-cm4.8 N-m | 6.0V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | Aluminum | Brushed | (add) | Steel | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | (add) | (add) | (add) | -30–70°C-22.0–158.0°F | IP67 | (add) | (add) | (add) | (add) | 10.47 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Volz | DA 22-06-2605 * | Hobby | 6.0V 396.5 oz-in28.55 kg-cm2.8 N-m | 6.0V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | (add) | (add) | (add) | Metal | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.86 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Volz | DA 22-06-4106 * | Hobby | 6.0V 679.7 oz-in48.94 kg-cm4.8 N-m | 6.0V 0.33 s/60°181.8 deg/s30.3 RPM | (add) | 4.66 oz132.1 g | 1.64×0.87×2.60 in 41.7×22.1×66.0 mm | — | Large | (add) | (add) | (add) | Metal | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Volz | DA 22-12-2615 * | Hobby | 12.0V 226.6 oz-in16.31 kg-cm1.6 N-m | 12.0V 0.29 s/60°206.9 deg/s34.5 RPM | ≤0.8 A≤800 mA | 3.70 oz104.9 g | 1.63×0.87×1.791 in 41.4×22.1×45.5 mm | — | Large | Aluminum | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | (add) | 2000 ms | 1000–2000 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | Yes | 10–16 V | (add) | (add) | -30–70°C-22.0–158.0°F | IP67 | (add) | (add) | 250 mm9.84 in | (add) | 1.44 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.100 A100 mA | — | — | |||
| Volz | DA 22-12-4112 * | Hobby | 12.0V 424.0 oz-in30.53 kg-cm3.0 N-m | 12.0V 0.24 s/60°250.0 deg/s41.7 RPM | ≤1.7 A≤1700 mA | 4.66 oz132.1 g | 1.64×0.87×2.60 in 41.7×22.1×66.0 mm | — | Large | Aluminum | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | 170 | 2000 ms | 1000–2000 µs | 1500 µs | (add) | (add) | Potentiometer | RS-485 / PWM | Yes | 10–16 V | Direct | (add) | -30–70°C-22.0–158.0°F | IP67 | (add) | (add) | 250 mm9.84 in | (add) | 3.27 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.100 A100 mA | 0.500° | — | |||
| Volz | DA 22-30-2615 * | Hobby | 30.0V 495.6 oz-in35.69 kg-cm3.5 N-m | 30.0V 0.12 s/60°500.0 deg/s83.3 RPM | ≤0.3 A≤300 mA | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | Aluminum | Brushed | (add) | Steel | (add) | Digital | (add) | 90° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | Yes | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | IP67 | (add) | M8 | 250 mm9.84 in | (add) | 7.64 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.69–8.90 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.772 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: FET
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 0.8 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.43–6.75 W
Weight: 2.75 oz77.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.772 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.49–3.12 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.602×0.807×1.555 in 40.7×20.5×39.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Splashproof
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.39 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.602×0.787×1.661 in 40.7×20.0×42.2 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.26–2.86 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.476 in 40.0×20.0×37.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤1.6 A≤1600 mA
Shaft Power: 1.53 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.583×0.791×1.449 in 40.2×20.1×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1520–1900 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 305 mm12.00 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.53 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.583×0.791×1.449 in 40.2×20.1×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 320 mm12.60 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤3.8 A≤3800 mA
Shaft Power: 4.04 W
Weight: 5.43 oz154.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.95×2.323×1.063 in 74.9×59.0×27.0 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 60°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: 2.5–2.8 A2500–2800 mA
Shaft Power: 3.30–4.92 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.602×0.807×1.516 in 40.7×20.5×38.5 mm
Case Material: Aluminum / Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Unitree
Stall Current: 20–40 A20000–40000 mA
Shaft Power: —
Weight: 21.34 oz605.0 g
Size Class: Custom
Diameter: 80.0 mm3.15 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 20–40 V
Power Source: External
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP68
Certification: CE
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 10.0 mm
Resolution: 32,768 p/r
Gear Ratio: 9.100
Baud Rate: 4.8 Mbps
Output Power: 260.0 W
Radial Load: 500.0 N
MCU: STM32
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: 40–64.665 A40000–64665 mA
Shaft Power: —
Weight: 61.38 oz1,740.0 g
Size Class: Custom
Diameter: 116.0 mm4.57 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: 1000 Hz
Angle Sensor: Absolute Encoder
Control System: CAN / RS485
Programmable: Yes
Op. Voltage: 36–64 V
Power Source: External
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP68
Certification: CE
Connector: (add)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 20.0 mm
Resolution: 32,768 p/r
Gear Ratio: 16.000
Baud Rate: 4.8 Mbps
Output Power: 500.0 W
Radial Load: 1,000.0 N
MCU: STM32
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: ≤40 A≤40000 mA
Shaft Power: —
Weight: 18.70 oz530.0 g
Size Class: Custom
Diameter: 96.5 mm3.80 in
Dimensions: 3.799×3.642×1.665 in 96.5×92.5×42.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 6000 Hz
Angle Sensor: Absolute Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–40°C23.0–104.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 6.330
Baud Rate: 4 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: ≤40 A≤40000 mA
Shaft Power: —
Weight: 18.87 oz535.0 g
Size Class: Custom
Diameter: 65.0 mm2.56 in
Dimensions: 2.362×2.559×2.559 in 60.0×65.0×65.0 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Absolute Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 24–75 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–90°C-4.0–194.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 12.660
Baud Rate: 4 Mbps–6 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque
Make: Vigor
Stall Current: (add)
Shaft Power: 1.17–1.62 W
Weight: 2.47 oz70.0 g
Size Class: Large
Diameter: —
Dimensions: 1.94×1.00×1.69 in 49.3×25.4×42.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 170°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 0.92–1.25 W
Weight: 2.50 oz70.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.78×1.77 in 40.9×19.8×45.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤3 A≤3000 mA
Shaft Power: 2.40 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.80×1.79 in 41.7×20.3×45.5 mm
Case Material: Aluminum / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: 170
Pulse Cycle: 20 ms
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: Splashproof
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: 2.06 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.80×1.79 in 41.7×20.3×45.5 mm
Case Material: Aluminum / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: 330
Pulse Cycle: 20 ms
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 5–8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: Splashproof
Certification: (add)
Connector: FCI Mini-PV 65039-034LF-compatible, 3-pin
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.8 A≤800 mA
Shaft Power: 1.44 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×1.815×0.815 in 41.7×46.1×20.7 mm
Case Material: Aluminum / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: 170
Pulse Cycle: 20 ms
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 10–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: Splashproof
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.6 A≤600 mA
Shaft Power: —
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.815×1.638×0.815 in 46.1×41.6×20.7 mm
Case Material: Aluminum / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: 170
Pulse Cycle: 20 ms
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: IP51
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 10.47 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 3.86 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 3.81 W
Weight: 4.66 oz132.1 g
Size Class: Large
Diameter: —
Dimensions: 1.64×0.87×2.60 in 41.7×22.1×66.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.8 A≤800 mA
Shaft Power: 1.44 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.791 in 41.4×22.1×45.5 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 2000 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 10–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤1.7 A≤1700 mA
Shaft Power: 3.27 W
Weight: 4.66 oz132.1 g
Size Class: Large
Diameter: —
Dimensions: 1.64×0.87×2.60 in 41.7×22.1×66.0 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: 170
Pulse Cycle: 2000 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: RS-485 / PWM
Programmable: Yes
Op. Voltage: 10–16 V
Power Source: Direct
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.3 A≤300 mA
Shaft Power: 7.64 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: M8
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.