Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-10Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | (add) |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
236.09 oz-in
17.00 kg-cm
1.7 N-m
4.8V
215.25 oz-in
15.50 kg-cm
1.5 N-m
|
| Speed |
6.0V
0.14 sec/60°
428.6 deg/s
71.4 RPM
4.8V
0.16 sec/60°
375.0 deg/s
62.5 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 2.49–3.12 W |
| Physical | |
| Weight | 2.22 oz63.0 g |
| Dimensions |
L 1.60 in W 0.81 in H 1.56 in L 40.7 mm W 20.5 mm H 39.5 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Brushed |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | 25 T |
| Rotation Mode | (add) |
| Rotation/Support | Dual Bearings |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
ShawnStang
August 24, 2012Application(s): RC4WD Bruiser (narrowed chassis) with k44 axles and 1.9" wheels/tires.
Comments: Very nice servo for the price. Nicely machined gears with a good mesh. Top of the case will be the weak point where it has a small brass bushing for the center gear. The solder was clean and coated/painted over to protect. Its almost identical in size to my Hitec servos and fits in any standard size servo application. I strongly suggest using a UBEC to make sure it gets proper amperage and doesn't overload your ESC's BEC. I highly recommend this servo to anyone that is very tight on their budget.