Discover XQ-Power Servos in Our eBay Store!
Shop NowDigital Servos (3,687)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| DSServo | DS3240 SG | Hobby |
6.8V 624.9 oz-in45.00 kg-cm4.4 N-m 5.0V 500.0 oz-in36.00 kg-cm3.5 N-m |
6.8V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
3.1–3.9 A3100–3900 mA | 2.12 oz60.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -25–70°C-13.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | — | 342.000 | — | — | — | — | — | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | — | — | ||
| DSServo | DS3245 SG | Hobby |
8.4V 708.3 oz-in51.00 kg-cm5.0 N-m 7.4V 638.8 oz-in46.00 kg-cm4.5 N-m 6.0V 555.5 oz-in40.00 kg-cm3.9 N-m 5.0V 486.1 oz-in35.00 kg-cm3.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
3.5–5.8 A3500–5800 mA | 2.12 oz60.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | — | 342.000 | — | — | — | — | — | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | DS51150 | Hobby |
12.6V 2,083.1 oz-in150.00 kg-cm14.7 N-m 12.0V 1,972.0 oz-in142.00 kg-cm13.9 N-m 10.0V 1,735.9 oz-in125.00 kg-cm12.3 N-m |
12.6V 0.19 s/60°315.8 deg/s52.6 RPM 12.0V 0.21 s/60°285.7 deg/s47.6 RPM 10.0V 0.24 s/60°250.0 deg/s41.7 RPM |
7.4–8.3 A7400–8300 mA | 6.17 oz175.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Brushed | (add) | Metal | 18 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 9–12.6 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | — | 357.000 | — | — | — | — | — | 6.000 A @ 12.6V6,000 mA @ 12.6V | (add) | (add) | — | — | ||
| DSServo | DS5160 SSG | Hobby |
8.4V 972.1 oz-in70.00 kg-cm6.9 N-m 7.4V 902.7 oz-in65.00 kg-cm6.4 N-m 6.0V 805.5 oz-in58.00 kg-cm5.7 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
4.1–6.5 A4100–6500 mA | 5.57 oz158.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Brushed | (add) | Metal | 18 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | — | 279.000 | — | — | — | — | — | 6.000 A @ 8.4V6,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | DS5180 SSG | Hobby |
8.4V 1,458.2 oz-in105.00 kg-cm10.3 N-m 7.4V 1,361.0 oz-in98.00 kg-cm9.6 N-m 6.0V 1,180.4 oz-in85.00 kg-cm8.3 N-m |
8.4V 0.19 s/60°315.8 deg/s52.6 RPM 7.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.24 s/60°250.0 deg/s41.7 RPM |
4.1–6.5 A4100–6500 mA | 5.57 oz158.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Brushed | (add) | Metal | 18 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | — | 357.000 | — | — | — | — | — | 6.000 A @ 8.4V6,000 mA @ 8.4V | (add) | (add) | — | — | ||
| DSServo | RDS3218 | Robotics |
6.8V 347.2 oz-in25.00 kg-cm2.5 N-m 5.0V 298.6 oz-in21.50 kg-cm2.1 N-m |
6.8V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
1.6–2.5 A1600–2500 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3225 | Robotics |
6.8V 479.1 oz-in34.50 kg-cm3.4 N-m 5.0V 409.7 oz-in29.50 kg-cm2.9 N-m |
6.8V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
2.1–2.9 A2100–2900 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3230 | Robotics |
6.8V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 361.1 oz-in26.00 kg-cm2.5 N-m |
6.8V 0.19 s/60°319.1 deg/s53.2 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
3.5–3.8 A3500–3800 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 4.8–6.8 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 221.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 6.8V5,000 mA @ 6.8V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3235 | Robotics |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 5.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
2.2–3.2 A2200–3200 mA | 2.12 oz60.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | (add) | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS3245 | Robotics |
8.4V 708.3 oz-in51.00 kg-cm5.0 N-m 7.4V 638.8 oz-in46.00 kg-cm4.5 N-m 5.0V 486.1 oz-in35.00 kg-cm3.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 5.0V 0.18 s/60°333.3 deg/s55.6 RPM |
3.5–5.8 A3500–5800 mA | 2.12 oz60.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | (add) | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | No | 5–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP66 | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 342.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS5160 | Robotics |
8.4V 972.1 oz-in70.00 kg-cm6.9 N-m 7.4V 902.7 oz-in65.00 kg-cm6.4 N-m 6.0V 805.5 oz-in58.00 kg-cm5.7 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
4.1–6.5 A4100–6500 mA | 5.75 oz163.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | (add) | Giant | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 279.000 | (add) | (add) | (add) | (add) | (add) | 5.000 A @ 8.4V5,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| DSServo | RDS5180 | Robotics |
8.4V 1,458.2 oz-in105.00 kg-cm10.3 N-m 7.4V 1,361.0 oz-in98.00 kg-cm9.6 N-m 6.0V 1,180.4 oz-in85.00 kg-cm8.3 N-m |
8.4V 0.19 s/60°315.8 deg/s52.6 RPM 7.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.24 s/60°250.0 deg/s41.7 RPM |
4.1–6.5 A4100–6500 mA | 5.75 oz163.0 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | (add) | Giant | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | Counterclockwise | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 3 µs | (add) | (add) | PWM | No | 6–8.4 V | (add) | (add) | ≤70°C≤158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | — | Boxed | (add) | (add) | 357.000 | (add) | (add) | (add) | (add) | (add) | 6.000 A @ 8.4V6,000 mA @ 8.4V | (add) | (add) | (add) | (add) | ||
| Dymond | D150 Digital | Hobby | 4.8V 40.0 oz-in2.88 kg-cm0.3 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.44 oz12.5 g | 0.91×0.47×1.22 in 23.0×12.0×31.0 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D150 Digital HV | Hobby | 4.8V 39.0 oz-in2.81 kg-cm0.3 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.44 oz12.6 g | 0.91×0.47×1.22 in 23.0×12.0×31.0 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.52 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D160D * | Hobby |
6.0V 42.0 oz-in3.02 kg-cm0.3 N-m 4.8V 40.0 oz-in2.88 kg-cm0.3 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.53 oz15.0 g | 0.91×0.47×1.26 in 23.0×12.0×32.0 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.62–0.78 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D160DHV | Hobby |
6.0V 45.0 oz-in3.24 kg-cm0.3 N-m 4.8V 43.0 oz-in3.10 kg-cm0.3 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.53 oz15.0 g | 0.91×0.47×1.26 in 23.0×12.0×32.0 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.66–0.83 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D2000 | Hobby | 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 1.13 oz32.0 g | 1.26×0.67×1.38 in 32.0×17.0×35.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.92 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D2500 | Hobby | 4.8V 75.0 oz-in5.40 kg-cm0.5 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 1.13 oz32.0 g | 1.26×0.67×1.38 in 32.0×17.0×35.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.99 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D30 | Hobby | 4.8V 13.0 oz-in0.94 kg-cm0.1 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.39 oz11.0 g | 0.79×0.39×0.79 in 20.0×10.0×20.0 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | Bushing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.17 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D3500 * | Hobby | 4.8V 63.0 oz-in4.54 kg-cm0.4 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 0.92 oz26.0 g | 1.40×0.67×1.38 in 35.5×17.0×35.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D360 | Hobby |
6.0V 40.0 oz-in2.88 kg-cm0.3 N-m 4.8V 39.0 oz-in2.81 kg-cm0.3 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.53 oz15.0 g | 0.90×0.47×1.34 in 22.8×11.8×34.0 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.72–0.74 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D6000 | Hobby | 4.8V 185.0 oz-in13.32 kg-cm1.3 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D6500 | Hobby | 4.8V 140.0 oz-in10.08 kg-cm1.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 2.05 oz58.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.29 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D90 Digital | Hobby | 4.8V 21.0 oz-in1.51 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.32 oz9.0 g | 0.91×0.47×0.85 in 23.0×12.0×21.5 mm | — | Micro | (add) | (add) | (add) | Plastic | 25 | Bushing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Dymond | D9000 | Hobby |
7.4V 403.0 oz-in29.02 kg-cm2.8 N-m 6.0V 361.0 oz-in25.99 kg-cm2.5 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | (add) | 1.58×0.79×1.47 in 40.0×20.0×37.2 mm | — | Standard | (add) | (add) | (add) | (add) | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.17–5.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: DSServo
Stall Current: 3.1–3.9 A3100–3900 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -25–70°C-13.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–5.8 A3500–5800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 7.4–8.3 A7400–8300 mA
Shaft Power: —
Weight: 6.17 oz175.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 18
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 357.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.57 oz158.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 18
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 279.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.57 oz158.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 18
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 357.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 1.6–2.5 A1600–2500 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 2.1–2.9 A2100–2900 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–3.8 A3500–3800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 221.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 2.2–3.2 A2200–3200 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 3.5–5.8 A3500–5800 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP66
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 342.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.75 oz163.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 279.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: DSServo
Stall Current: 4.1–6.5 A4100–6500 mA
Shaft Power: —
Weight: 5.75 oz163.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤70°C≤158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 357.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.53 W
Weight: 0.44 oz12.5 g
Size Class: Mini
Diameter: —
Dimensions: 0.91×0.47×1.22 in 23.0×12.0×31.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.52 W
Weight: 0.44 oz12.6 g
Size Class: Mini
Diameter: —
Dimensions: 0.91×0.47×1.22 in 23.0×12.0×31.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.62–0.78 W
Weight: 0.53 oz15.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.91×0.47×1.26 in 23.0×12.0×32.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.66–0.83 W
Weight: 0.53 oz15.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.91×0.47×1.26 in 23.0×12.0×32.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.92 W
Weight: 1.13 oz32.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.26×0.67×1.38 in 32.0×17.0×35.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.99 W
Weight: 1.13 oz32.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.26×0.67×1.38 in 32.0×17.0×35.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.17 W
Weight: 0.39 oz11.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.39×0.79 in 20.0×10.0×20.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.46 W
Weight: 0.92 oz26.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.67×1.38 in 35.5×17.0×35.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.72–0.74 W
Weight: 0.53 oz15.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.90×0.47×1.34 in 22.8×11.8×34.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.90 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 1.29 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 0.32 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×0.85 in 23.0×12.0×21.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Dymond
Stall Current: (add)
Shaft Power: 4.17–5.32 W
Weight: (add)
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.47 in 40.0×20.0×37.2 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.