Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Turnigy | TGY50090W | Hobby |
6.0V 26.4 oz-in1.90 kg-cm0.2 N-m 4.8V 23.6 oz-in1.70 kg-cm0.2 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
0.7–0.8 A700–800 mA | 0.46 oz13.0 g | 0.90×0.49×1.24 in 22.9×12.4×31.5 mm | — | Micro | (add) | Brushed | (add) | Metal | 21 | Bushing | Analog | (add) | 195° | (add) | (add) | 900–2100 µs | 1500 µs | 6 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 190 mm7.48 in | (add) | 0.49–0.61 W | — | (add) | — | — | — | — | — | — | — | 0.350 A @ 6.0V350 mA @ 6.0V | Positional | 0.020 A20 mA | — | — | ||
| Turnigy | TGYD56LV | Hobby |
5.5V 12.4 oz-in0.89 kg-cm0.1 N-m 3.7V 9.7 oz-in0.70 kg-cm0.1 N-m |
5.5V 0.10 s/60°600.0 deg/s100.0 RPM 3.7V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.20 oz5.6 g | 0.78×0.32×0.79 in 19.8×8.1×20.1 mm | — | Micro | (add) | Coreless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.15–0.23 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TR-1160A * | Hobby | 6.0V 29.2 oz-in2.10 kg-cm0.2 N-m | 6.0V 0.11 s/60°545.5 deg/s90.9 RPM | ≤0.8 A≤800 mA | 0.56 oz16.0 g | 1.17×0.52×1.10 in 29.6×13.2×28.0 mm | — | Mini | (add) | Brushed | (add) | Plastic | 25 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 0.49 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.005 A5 mA | — | — | ||
| Unitree | A1 Motor | Robotics | 40.0V 4,744.0 oz-in341.60 kg-cm33.5 N-m | 40.0V 0.05 s/60°1,203.1 deg/s200.5 RPM | 20–40 A20000–40000 mA | 21.34 oz605.0 g | 3.15×—×— in80.0×—×— mm | 80.0 mm3.15 in | Custom | Aluminum | Brushless | FET | Steel | (add) | Dual Bearings | Digital | Bidirectional | (add) | (add) | (add) | (add) | (add) | 1 µs | 1000 Hz | Magnetic Encoder | RS485 | Yes | 20–40 V | External | (add) | -10–60°C14.0–140.0°F | IP68 | CE | (add) | 300 mm11.81 in | (add) | — | Cylindrical | 10.0 mm | 32,768 p/r | 9.100 | 4.8 Mbps | 260.0 W | 500.0 N | STM32 | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | 200.000 A200,000 mA | 0.050° | 5V | ||
| Unitree | B1-16 | Robotics | 64.0V 19,825.7 oz-in1,427.60 kg-cm140.0 N-m | 64.0V 0.07 s/60°895.5 deg/s149.3 RPM | 40–64.665 A40000–64665 mA | 61.38 oz1,740.0 g | 4.57×—×— in116.0×—×— mm | 116.0 mm4.57 in | Custom | Aluminum | Brushless | FET | Steel | (add) | Dual Bearings | Digital | Bidirectional | (add) | (add) | (add) | (add) | (add) | 1 µs | 1000 Hz | Absolute Encoder | CAN / RS485 | Yes | 36–64 V | External | (add) | -10–60°C14.0–140.0°F | IP68 | CE | (add) | 100 mm3.94 in | (add) | — | Cylindrical | 20.0 mm | 32,768 p/r | 16.000 | 4.8 Mbps | 500.0 W | 1,000.0 N | STM32 | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | 270.000 A270,000 mA | 0.050° | 5V | ||
| Unitree | GO-M8010-6 | Robotics | 24.0V 3,356.2 oz-in241.67 kg-cm23.7 N-m | 24.0V 0.04 s/60°1,714.3 deg/s285.7 RPM | ≤40 A≤40000 mA | 18.70 oz530.0 g | 3.80×—×— in96.5×—×— mm | 96.5 mm3.80 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6000 Hz | Absolute Encoder | RS485 | Yes | 12–30 V | (add) | (add) | -5–40°C23.0–104.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 6.330 | 4 Mbps | (add) | (add) | (add) | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | (add) | (add) | (add) | ||
| Unitree | IM6014 | Robotics | 60.0V 4,871.5 oz-in350.78 kg-cm34.4 N-m | 60.0V 0.02 s/60°3,157.9 deg/s526.3 RPM | ≤40 A≤40000 mA | 18.87 oz535.0 g | 2.56×—×— in65.0×—×— mm | 65.0 mm2.56 in | Custom | Aluminum / Plastic | Brushless | FET | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 400 Hz | Absolute Encoder | CAN / RS485 | Yes | 24–75 V | (add) | (add) | -20–90°C-4.0–194.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 12.660 | 4 Mbps–6 Mbps | (add) | (add) | (add) | Position, Velocity, Torque | (add) | (add) | (add) | (add) | (add) | ||
| Unitree | YS-342026-J288 | Robotics | 25.2V 212.4 oz-in15.30 kg-cm1.5 N-m |
25.2V 0.03 s/60°2,000.0 deg/s333.3 RPM 12.0V 0.06 s/60°952.4 deg/s158.7 RPM |
≤1.92 A≤1920 mA | 1.38 oz39.0 g | 1.34×0.79×1.02 in 34.0×20.0×26.0 mm | (add) | Standard | Aluminum | Brushless | FET | Steel | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Absolute Encoder | Serial | Yes | 6.4–25.2 V | (add) | (add) | -20–90°C-4.0–194.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | 14.0 mm | 32,768 p/r | 288.350 | 6 Mbps | 52.5 W | (add) | (add) | Position, Velocity, Torque, Stiffness, Damping | 0.450 A @ 25.2V450 mA @ 25.2V | Continuous | 0.026 A26 mA | (add) | (add) | ||
| Unitree | YS-342026-S288 | Robotics | 12.0V 85.0 oz-in6.12 kg-cm0.6 N-m | 12.0V 0.06 s/60°952.4 deg/s158.7 RPM | ≤0.32 A≤320 mA | 0.71 oz20.0 g | 1.34×0.79×1.02 in 34.0×20.0×26.0 mm | (add) | Standard | Plastic | Brushless | FET | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Absolute Encoder | TTL | Yes | 6.4–12.6 V | (add) | (add) | -20–90°C-4.0–194.0°F | (add) | (add) | (add) | (add) | (add) | 2.49 W | Boxed | (add) | 32,768 p/r | 288.350 | 6 Mbps | (add) | (add) | (add) | Position, Velocity, Torque, Stiffness, Damping | 0.270 A @ 12.0V270 mA @ 12.0V | Continuous | 0.050 A50 mA | (add) | (add) | ||
| Venom | VAC-02 * | Hobby | 4.8V 15.3 oz-in1.10 kg-cm0.1 N-m | (add) | (add) | 0.32 oz9.0 g | 1.18×0.47×0.87 in 30.0×11.9×22.1 mm | — | Mini | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Venom | VENF-7740 * | Hobby | (add) | (add) | (add) | 0.27 oz7.6 g | 0.94×0.47×0.89 in 23.9×11.9×22.6 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Venom | VENF-7778 * | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Venom | VENF-7826 * | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Venom | VENF-8102 * | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VS-10A * | Hobby |
6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.47 oz70.0 g | 1.94×1.00×1.69 in 49.3×25.4×42.9 mm | — | Large | (add) | Brushed | (add) | Plastic | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | 5 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 250 mm9.84 in | (add) | 1.17–1.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Vigor | VS-15 * | Hobby |
6.0V 27.8 oz-in2.00 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.32 oz9.0 g | 0.91×0.47×1.01 in 23.0×11.8×25.6 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.39–0.51 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Vigor | VS-2 * | Hobby |
6.0V 48.6 oz-in3.50 kg-cm0.3 N-m 4.8V 44.4 oz-in3.20 kg-cm0.3 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
0.8–1 A800–1000 mA | 1.38 oz39.2 g | 1.60×0.79×1.53 in 40.6×20.1×38.9 mm | — | Standard | (add) | Brushed | (add) | Plastic | (add) | Bushing | Analog | Counterclockwise | 170° | (add) | (add) | 800–2200 µs | 1500 µs | 5 µs | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba | JR | 250 mm9.84 in | (add) | 0.36–0.47 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Vigor | VS-3 * | Hobby |
6.0V 34.7 oz-in2.50 kg-cm0.2 N-m 4.8V 30.6 oz-in2.20 kg-cm0.2 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.60 oz17.0 g | 1.14×0.50×1.24 in 29.0×12.7×31.5 mm | — | Mini | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.35–0.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VS-5 * | Hobby |
6.0V 16.7 oz-in1.20 kg-cm0.1 N-m 4.8V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 0.28 oz8.0 g | 0.90×0.48×0.95 in 22.9×12.2×24.1 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.15–0.22 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VS-6 * | Hobby | 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m | 4.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 0.21 oz6.0 g | 0.83×0.46×0.87 in 21.1×11.7×22.1 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.17 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VS-9 * | Hobby |
6.0V 8.3 oz-in0.60 kg-cm0.1 N-m 4.8V 6.9 oz-in0.50 kg-cm0.0 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.16 oz4.4 g | 0.77×0.32×0.94 in 19.6×8.1×23.9 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.14–0.19 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VSD-2 * | Hobby | 4.8V 48.6 oz-in3.50 kg-cm0.3 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.38 oz39.2 g | 1.60×0.79×1.53 in 40.6×20.1×38.9 mm | — | Standard | (add) | 3-pole | (add) | Plastic | (add) | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.50 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VSD-3 * | Hobby | 4.8V 30.6 oz-in2.20 kg-cm0.2 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.57 oz16.2 g | 1.14×0.50×1.24 in 29.0×12.7×31.5 mm | — | Mini | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.35 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VSD-5 * | Hobby | 4.8V 13.9 oz-in1.00 kg-cm0.1 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 0.28 oz8.0 g | 0.90×0.48×0.95 in 22.9×12.2×24.1 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.15 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Vigor | VSD-6 * | Hobby | 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.21 oz6.0 g | 0.83×0.46×0.87 in 21.1×11.7×22.1 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.15 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
Make: Turnigy
Stall Current: 0.7–0.8 A700–800 mA
Shaft Power: 0.49–0.61 W
Weight: 0.46 oz13.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.49×1.24 in 22.9×12.4×31.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: 195°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 6 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 190 mm7.48 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.15–0.23 W
Weight: 0.20 oz5.6 g
Size Class: Micro
Diameter: —
Dimensions: 0.78×0.32×0.79 in 19.8×8.1×20.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤0.8 A≤800 mA
Shaft Power: 0.49 W
Weight: 0.56 oz16.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.17×0.52×1.10 in 29.6×13.2×28.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Unitree
Stall Current: 20–40 A20000–40000 mA
Shaft Power: —
Weight: 21.34 oz605.0 g
Size Class: Custom
Diameter: 80.0 mm3.15 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: 1000 Hz
Angle Sensor: Magnetic Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 20–40 V
Power Source: External
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP68
Certification: CE
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 10.0 mm
Resolution: 32,768 p/r
Gear Ratio: 9.100
Baud Rate: 4.8 Mbps
Output Power: 260.0 W
Radial Load: 500.0 N
MCU: STM32
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: 40–64.665 A40000–64665 mA
Shaft Power: —
Weight: 61.38 oz1,740.0 g
Size Class: Custom
Diameter: 116.0 mm4.57 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: 1000 Hz
Angle Sensor: Absolute Encoder
Control System: CAN / RS485
Programmable: Yes
Op. Voltage: 36–64 V
Power Source: External
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP68
Certification: CE
Connector: (add)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 20.0 mm
Resolution: 32,768 p/r
Gear Ratio: 16.000
Baud Rate: 4.8 Mbps
Output Power: 500.0 W
Radial Load: 1,000.0 N
MCU: STM32
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: ≤40 A≤40000 mA
Shaft Power: —
Weight: 18.70 oz530.0 g
Size Class: Custom
Diameter: 96.5 mm3.80 in
Dimensions: 3.80×3.64×1.67 in 96.5×92.5×42.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 6000 Hz
Angle Sensor: Absolute Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–40°C23.0–104.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 6.330
Baud Rate: 4 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: ≤40 A≤40000 mA
Shaft Power: —
Weight: 18.87 oz535.0 g
Size Class: Custom
Diameter: 65.0 mm2.56 in
Dimensions: 2.56×2.56×2.56 in 65.0×65.0×65.0 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Absolute Encoder
Control System: CAN / RS485
Programmable: Yes
Op. Voltage: 24–75 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–90°C-4.0–194.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 12.660
Baud Rate: 4 Mbps–6 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque
Make: Unitree
Stall Current: ≤1.92 A≤1920 mA
Shaft Power: —
Weight: 1.38 oz39.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.34×0.79×1.02 in 34.0×20.0×26.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Absolute Encoder
Control System: Serial
Programmable: Yes
Op. Voltage: 6.4–25.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–90°C-4.0–194.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: 14.0 mm
Resolution: 32,768 p/r
Gear Ratio: 288.350
Baud Rate: 6 Mbps
Output Power: 52.5 W
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: ≤0.32 A≤320 mA
Shaft Power: 2.49 W
Weight: 0.71 oz20.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.34×0.79×1.02 in 34.0×20.0×26.0 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: FET
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Absolute Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 6.4–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–90°C-4.0–194.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 288.350
Baud Rate: 6 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Venom
Stall Current: (add)
Shaft Power: —
Weight: 0.32 oz9.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.47×0.87 in 30.0×11.9×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Venom
Stall Current: (add)
Shaft Power: —
Weight: 0.27 oz7.6 g
Size Class: Micro
Diameter: —
Dimensions: 0.94×0.47×0.89 in 23.9×11.9×22.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Venom
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Venom
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Venom
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 1.17–1.62 W
Weight: 2.47 oz70.0 g
Size Class: Large
Diameter: —
Dimensions: 1.94×1.00×1.69 in 49.3×25.4×42.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.39–0.51 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.01 in 23.0×11.8×25.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: 0.8–1 A800–1000 mA
Shaft Power: 0.36–0.47 W
Weight: 1.38 oz39.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.79×1.53 in 40.6×20.1×38.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: Counterclockwise
Op. Range: 170°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba | JR
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.35–0.53 W
Weight: 0.60 oz17.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.14×0.50×1.24 in 29.0×12.7×31.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.15–0.22 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.48×0.95 in 22.9×12.2×24.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.17 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.83×0.46×0.87 in 21.1×11.7×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.14–0.19 W
Weight: 0.16 oz4.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.77×0.32×0.94 in 19.6×8.1×23.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.50 W
Weight: 1.38 oz39.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.79×1.53 in 40.6×20.1×38.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.35 W
Weight: 0.57 oz16.2 g
Size Class: Mini
Diameter: —
Dimensions: 1.14×0.50×1.24 in 29.0×12.7×31.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.15 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.48×0.95 in 22.9×12.2×24.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Vigor
Stall Current: (add)
Shaft Power: 0.15 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.83×0.46×0.87 in 21.1×11.7×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.