Discover XQ-Power Servos in Our eBay Store!
Shop NowDigital Servos (3,687)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| NSDRC | RS700 V2 | Hobby |
16.8V 1,115.0 oz-in80.29 kg-cm7.9 N-m 12.6V 912.0 oz-in65.67 kg-cm6.4 N-m 8.4V 634.0 oz-in45.65 kg-cm4.5 N-m |
16.8V 0.09 s/60°666.7 deg/s111.1 RPM 12.6V 0.11 s/60°545.5 deg/s90.9 RPM 8.4V 0.15 s/60°400.0 deg/s66.7 RPM |
3.6–5.8 A3600–5800 mA | 2.47 oz70.0 g | 1.57×0.79×1.18 in 40.0×20.0×30.0 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | Potentiometer | (add) | (add) | 8.4–16.8 V | (add) | Direct | -10–50°C14.0–122.0°F | IP66 | (add) | (add) | 220 mm8.66 in | USA | 7.82–22.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | RS800 V2 | Hobby |
16.8V 1,100.0 oz-in79.21 kg-cm7.8 N-m 12.6V 900.0 oz-in64.81 kg-cm6.4 N-m 8.4V 600.0 oz-in43.20 kg-cm4.2 N-m |
16.8V 0.10 s/60°600.0 deg/s100.0 RPM 12.6V 0.14 s/60°428.6 deg/s71.4 RPM 8.4V 0.18 s/60°333.3 deg/s55.6 RPM |
3.5–6.6 A3500–6600 mA | 3.00 oz85.0 g | 1.57×0.79×1.54 in 40.0×20.0×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 3 µs | (add) | Potentiometer | (add) | (add) | 8.4–16.8 V | 4S LiPo | Direct | -10–50°C14.0–122.0°F | IP67 | (add) | (add) | 310 mm12.20 in | USA | 6.16–20.34 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | SS200 | Hobby |
8.4V 245.0 oz-in17.64 kg-cm1.7 N-m 7.4V 215.0 oz-in15.48 kg-cm1.5 N-m 6.0V 177.0 oz-in12.75 kg-cm1.2 N-m 5.0V 145.0 oz-in10.44 kg-cm1.0 N-m |
8.4V 0.03 s/60°1,818.2 deg/s303.0 RPM 7.4V 0.04 s/60°1,621.6 deg/s270.3 RPM 6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 5.0V 0.05 s/60°1,132.1 deg/s188.7 RPM |
4.1–6.2 A4100–6200 mA | 2.29 oz65.0 g | 1.57×0.79×1.06 in 40.0×20.0×27.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | 330 Hz | Potentiometer | (add) | (add) | 5–8.4 V | (add) | BEC | -10–50°C14.0–122.0°F | IP66 | (add) | (add) | 310 mm12.20 in | USA | 5.06–13.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | SS400 | Hobby |
8.4V 400.0 oz-in28.80 kg-cm2.8 N-m 7.4V 345.0 oz-in24.84 kg-cm2.4 N-m 6.0V 290.0 oz-in20.88 kg-cm2.0 N-m 5.0V 230.0 oz-in16.56 kg-cm1.6 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.08 s/60°750.0 deg/s125.0 RPM |
3.1–4.6 A3100–4600 mA | 2.26 oz64.0 g | 1.57×0.79×1.06 in 40.0×20.0×27.0 mm | — | Low Profile | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | Potentiometer | (add) | (add) | 5–8.4 V | (add) | BEC | -10–50°C14.0–122.0°F | IP67 | (add) | (add) | 320 mm12.60 in | USA | 5.32–14.79 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| NSDRC | SS600 | Hobby |
8.4V 687.0 oz-in49.47 kg-cm4.9 N-m 7.4V 600.0 oz-in43.20 kg-cm4.2 N-m 6.0V 512.0 oz-in36.87 kg-cm3.6 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM |
3.1–4.3 A3100–4300 mA | 3.23 oz91.5 g | 1.57×0.79×1.52 in 40.0×20.0×38.7 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1500 µs | 2 µs | 330 Hz | Potentiometer | (add) | (add) | 5–8.4 V | (add) | BEC | -10–50°C14.0–122.0°F | IP66 | (add) | (add) | 220 mm8.66 in | USA | 15.78–31.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-202BL | Hobby |
8.4V 277.7 oz-in20.00 kg-cm2.0 N-m 6.0V 152.8 oz-in11.00 kg-cm1.1 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.06 s/60°1,071.4 deg/s178.6 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 720 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-202BLH | Hobby |
12.6V 277.7 oz-in20.00 kg-cm2.0 N-m 7.2V 152.8 oz-in11.00 kg-cm1.1 N-m |
12.6V 0.03 s/60°1,875.0 deg/s312.5 RPM 7.2V 0.05 s/60°1,132.1 deg/s188.7 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 720 Hz | Magnetic Encoder | PWM | (add) | 7.2–12.6 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-351BLC | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 6.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Multi-turn | (add) | — | — | ||
| OCServo | OCS-352BL | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-352BLH | Hobby |
12.6V 486.1 oz-in35.00 kg-cm3.4 N-m 7.2V 347.2 oz-in25.00 kg-cm2.5 N-m |
12.6V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.2V 0.08 s/60°800.0 deg/s133.3 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 7.2–12.6 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-451BL | Hobby |
8.4V 624.9 oz-in45.00 kg-cm4.4 N-m 6.0V 416.6 oz-in30.00 kg-cm2.9 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
2.8–4 A2800–4000 mA | 2.72 oz77.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-751BL | Hobby |
8.4V 1,041.6 oz-in75.00 kg-cm7.4 N-m 6.0V 736.0 oz-in53.00 kg-cm5.2 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
6–9 A6000–9000 mA | 3.10 oz88.0 g | 1.57×0.79×1.52 in 39.9×20.1×38.6 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-851BL | Hobby |
16.8V 1,180.4 oz-in85.00 kg-cm8.3 N-m 8.4V 583.3 oz-in42.00 kg-cm4.1 N-m |
16.8V 0.11 s/60°545.5 deg/s90.9 RPM 8.4V 0.17 s/60°352.9 deg/s58.8 RPM |
4–6 A4000–6000 mA | 3.25 oz92.0 g | 1.57×0.79×1.68 in 39.9×20.1×42.7 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 8.4–16.8 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D008 | Hobby |
7.4V 44.4 oz-in3.20 kg-cm0.3 N-m 6.0V 36.1 oz-in2.60 kg-cm0.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
0.8–1.1 A800–1100 mA | 0.27 oz7.7 g | 0.93×0.35×0.77 in 23.6×8.9×19.6 mm | — | Micro | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | 20 ms | 500–2500 µs | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | No | 3.8–7.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JST | 145 mm5.71 in | (add) | 0.74–1.17 W | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D0702 | Hobby |
8.4V 97.2 oz-in7.00 kg-cm0.7 N-m 6.0V 69.4 oz-in5.00 kg-cm0.5 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.71 oz20.0 g | 0.91×0.47×1.07 in 23.1×11.9×27.2 mm | — | Micro | Aluminum | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D1002 | Robotics |
30.0V 2,083.1 oz-in150.00 kg-cm14.7 N-m 28.0V 1,805.4 oz-in130.00 kg-cm12.7 N-m 24.0V 1,388.7 oz-in100.00 kg-cm9.8 N-m |
30.0V 0.12 s/60°500.0 deg/s83.3 RPM 28.0V 0.15 s/60°400.0 deg/s66.7 RPM 24.0V 0.20 s/60°300.0 deg/s50.0 RPM |
6.5–10 A6500–10000 mA | 6.70 oz190.0 g | 2.40×1.18×2.38 in 61.0×30.0×60.5 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | 10 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | OCS-D1806 | Hobby |
8.4V 250.0 oz-in18.00 kg-cm1.8 N-m 6.0V 173.6 oz-in12.50 kg-cm1.2 N-m |
8.4V 0.07 s/60°923.1 deg/s153.8 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.59 oz45.0 g | 1.41×0.59×1.26 in 35.8×15.0×32.0 mm | — | Mini | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D2001 | Hobby |
16.8V 3,055.2 oz-in220.00 kg-cm21.6 N-m 12.6V 2,222.0 oz-in160.00 kg-cm15.7 N-m 8.4V 1,666.5 oz-in120.00 kg-cm11.8 N-m |
16.8V 0.15 s/60°400.0 deg/s66.7 RPM 12.6V 0.20 s/60°300.0 deg/s50.0 RPM 8.4V 0.26 s/60°230.8 deg/s38.5 RPM |
6.5–10 A6500–10000 mA | 14.11 oz400.0 g | 2.52×1.29×3.64 in 64.0×32.8×92.5 mm | — | Giant | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 8.4–16.8 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D2002 | Robotics |
30.0V 3,471.8 oz-in250.00 kg-cm24.5 N-m 28.0V 3,194.1 oz-in230.00 kg-cm22.6 N-m 24.0V 2,777.5 oz-in200.00 kg-cm19.6 N-m |
30.0V 0.13 s/60°461.5 deg/s76.9 RPM 28.0V 0.20 s/60°300.0 deg/s50.0 RPM 24.0V 0.29 s/60°206.9 deg/s34.5 RPM |
10–15 A10000–15000 mA | 14.29 oz405.0 g | 2.52×1.30×3.70 in 64.0×33.0×94.0 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | 5 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | OCS-D2007 | Hobby |
8.4V 291.6 oz-in21.00 kg-cm2.1 N-m 6.0V 194.4 oz-in14.00 kg-cm1.4 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.80 oz51.0 g | 1.41×0.59×1.38 in 35.8×15.0×35.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D2507 | Hobby |
8.4V 347.2 oz-in25.00 kg-cm2.5 N-m 6.0V 243.0 oz-in17.50 kg-cm1.7 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.29 oz65.0 g | 1.61×0.81×1.12 in 40.9×20.6×28.4 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D4001 | Robotics |
30.0V 5,416.1 oz-in390.00 kg-cm38.2 N-m 28.0V 4,999.5 oz-in360.00 kg-cm35.3 N-m 24.0V 4,444.0 oz-in320.00 kg-cm31.4 N-m |
30.0V 0.16 s/60°375.0 deg/s62.5 RPM 28.0V 0.20 s/60°300.0 deg/s50.0 RPM 24.0V 0.28 s/60°214.3 deg/s35.7 RPM |
5–7 A5000–7000 mA | 21.52 oz610.0 g | 2.68×1.38×4.72 in 68.1×35.1×119.9 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | 6 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | OCS-D4009 | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.29 oz65.0 g | 1.61×0.81×1.12 in 40.9×20.6×28.4 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 333 Hz | Magnetic Encoder | PWM | (add) | 6–8.4 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| OCServo | OCS-D6501 | Robotics |
30.0V 9,721.2 oz-in700.00 kg-cm68.6 N-m 28.0V 9,026.8 oz-in650.00 kg-cm63.7 N-m 24.0V 7,776.9 oz-in560.00 kg-cm54.9 N-m |
30.0V 0.21 s/60°285.7 deg/s47.6 RPM 28.0V 0.24 s/60°250.0 deg/s41.7 RPM 24.0V 0.30 s/60°200.0 deg/s33.3 RPM |
18–22.5 A18000–22500 mA | 31.61 oz896.0 g | 3.94×1.97×3.82 in 100.1×50.0×97.0 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | 8 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
| OCServo | OCS-D9501 | Robotics |
30.0V 13,193.0 oz-in950.00 kg-cm93.2 N-m 28.0V 12,776.4 oz-in920.00 kg-cm90.2 N-m 24.0V 11,804.3 oz-in850.00 kg-cm83.4 N-m |
30.0V 0.25 s/60°240.0 deg/s40.0 RPM 28.0V 0.28 s/60°214.3 deg/s35.7 RPM 24.0V 0.35 s/60°171.4 deg/s28.6 RPM |
21–26.5 A21000–26500 mA | 61.73 oz1,750.0 g | 4.72×2.36×4.39 in 119.9×59.9×111.5 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | 10 | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM | (add) | 24–30 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Position, Velocity | (add) | Continuous | (add) | (add) | (add) | ||
Make: NSDRC
Stall Current: 3.6–5.8 A3600–5800 mA
Shaft Power: 7.82–22.91 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.18 in 40.0×20.0×30.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: (add)
Regulator Type: Direct
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 220 mm8.66 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 3.5–6.6 A3500–6600 mA
Shaft Power: 6.16–20.34 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: 4S LiPo
Regulator Type: Direct
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 310 mm12.20 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 4.1–6.2 A4100–6200 mA
Shaft Power: 5.06–13.73 W
Weight: 2.29 oz65.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.57×0.79×1.06 in 40.0×20.0×27.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 310 mm12.20 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 3.1–4.6 A3100–4600 mA
Shaft Power: 5.32–14.79 W
Weight: 2.26 oz64.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.57×0.79×1.06 in 40.0×20.0×27.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: 320 mm12.60 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: NSDRC
Stall Current: 3.1–4.3 A3100–4300 mA
Shaft Power: 15.78–31.76 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.7 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: BEC
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: 220 mm8.66 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 720 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 720 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 7.2–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 7.2–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 2.8–4 A2800–4000 mA
Shaft Power: —
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 6–9 A6000–9000 mA
Shaft Power: —
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 39.9×20.1×38.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 4–6 A4000–6000 mA
Shaft Power: —
Weight: 3.25 oz92.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.68 in 39.9×20.1×42.7 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 0.8–1.1 A800–1100 mA
Shaft Power: 0.74–1.17 W
Weight: 0.27 oz7.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.35×0.77 in 23.6×8.9×19.6 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: No
Op. Voltage: 3.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JST
Wire Length: 145 mm5.71 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 0.71 oz20.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.07 in 23.1×11.9×27.2 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 6.5–10 A6500–10000 mA
Shaft Power: —
Weight: 6.70 oz190.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.40×1.18×2.38 in 61.0×30.0×60.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 10
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 1.59 oz45.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.41×0.59×1.26 in 35.8×15.0×32.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 6.5–10 A6500–10000 mA
Shaft Power: —
Weight: 14.11 oz400.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.29×3.64 in 64.0×32.8×92.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 8.4–16.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 10–15 A10000–15000 mA
Shaft Power: —
Weight: 14.29 oz405.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.30×3.70 in 64.0×33.0×94.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 5
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 1.80 oz51.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.41×0.59×1.38 in 35.8×15.0×35.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 2.29 oz65.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.12 in 40.9×20.6×28.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 5–7 A5000–7000 mA
Shaft Power: —
Weight: 21.52 oz610.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.68×1.38×4.72 in 68.1×35.1×119.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: (add)
Shaft Power: —
Weight: 2.29 oz65.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.81×1.12 in 40.9×20.6×28.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: OCServo
Stall Current: 18–22.5 A18000–22500 mA
Shaft Power: —
Weight: 31.61 oz896.0 g
Size Class: Giant
Diameter: —
Dimensions: 3.94×1.97×3.82 in 100.1×50.0×97.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 8
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Make: OCServo
Stall Current: 21–26.5 A21000–26500 mA
Shaft Power: —
Weight: 61.73 oz1,750.0 g
Size Class: Giant
Diameter: —
Dimensions: 4.72×2.36×4.39 in 119.9×59.9×111.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 10
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM
Programmable: (add)
Op. Voltage: 24–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.