Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Lynxmotion | LSS-ST1 | Robotics | 12.0V 38.9 oz-in2.80 kg-cm0.3 N-m |
12.0V 0.17 s/60°359.3 deg/s59.9 RPM 6.0V 0.33 s/60°180.2 deg/s30.0 RPM |
0.35–0.65 A350–650 mA | 2.05 oz58.0 g | 2.01×1.02×1.51 in 51.0×26.0×38.3 mm | (add) | Large | Plastic | Cored | (add) | Metal | 24 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | PWM / Serial | Yes | 6.5–12.6 V | 3S LiPo | (add) | ≤35°C≤95.0°F | (add) | (add) | Molex | (add) | (add) | — | Boxed | (add) | (add) | 253.000 | 9.6 Kbps–921.6 Kbps | 1.0 W | (add) | (add) | (add) | (add) | Continuous | 70.000 A70,000 mA | (add) | 5V | ||
| MacGregor RC | MG5510DS | Hobby |
6.0V 138.6 oz-in9.98 kg-cm1.0 N-m 5.0V 123.5 oz-in8.89 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 5.0V 0.15 s/60°400.0 deg/s66.7 RPM |
2.1–2.4 A2100–2400 mA | 1.96 oz55.6 g | 1.59×0.80×1.59 in 40.4×20.3×40.4 mm | — | Standard | Plastic | Brushed | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 5–6 V | (add) | (add) | -10–50°C14.0–122.0°F | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 1.52–2.14 W | Boxed | — | — | 200.000 | — | — | — | — | — | 0.630 A @ 6.0V630 mA @ 6.0V | (add) | (add) | — | — | ||
| MacGregor RC | MG5921HV | Hobby |
8.4V 281.9 oz-in20.30 kg-cm2.0 N-m 6.0V 238.9 oz-in17.20 kg-cm1.7 N-m |
8.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.08 oz59.0 g | 1.59×0.79×1.44 in 40.4×20.1×36.6 mm | — | Standard | Plastic | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 2.94–4.34 W | Boxed | — | — | — | — | — | — | — | — | 0.820 A @ 8.4V820 mA @ 8.4V | (add) | (add) | — | — | ||
| MacGregor RC | MG7232HV | Hobby |
8.4V 437.5 oz-in31.50 kg-cm3.1 N-m 6.0V 363.9 oz-in26.20 kg-cm2.6 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.54 oz72.0 g | (add) | — | Unknown | Aluminum | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 5.61–8.99 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MacGregor RC | MGB5216HV | Hobby |
8.4V 555.5 oz-in40.00 kg-cm3.9 N-m 7.4V 500.0 oz-in36.00 kg-cm3.5 N-m 6.0V 416.6 oz-in30.00 kg-cm2.9 N-m 5.0V 361.1 oz-in26.00 kg-cm2.5 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.14 s/60°428.6 deg/s71.4 RPM |
4.5–7.1 A4500–7100 mA | 1.83 oz52.0 g | 1.42×0.59×1.30 in 36.1×15.0×33.0 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | (add) | (add) | JR (Universal) | 220 mm8.66 in | (add) | 4.77–12.84 W | Boxed | — | — | 214.000 | — | — | — | — | — | 0.800 A @ 8.4V800 mA @ 8.4V | (add) | (add) | — | — | ||
| MacGregor RC | MGB6928HV2 | Hobby |
8.4V 583.3 oz-in42.00 kg-cm4.1 N-m 7.4V 555.5 oz-in40.00 kg-cm3.9 N-m 6.0V 430.5 oz-in31.00 kg-cm3.0 N-m 5.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 5.0V 0.10 s/60°600.0 deg/s100.0 RPM |
6.6–10.3 A6600–10300 mA | 3.14 oz89.0 g | 1.57×0.79×1.57 in 39.9×20.1×39.9 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | (add) | 5.91–21.57 W | Boxed | — | — | 214.000 | — | — | — | — | — | 0.900 A @ 8.4V900 mA @ 8.4V | (add) | (add) | — | — | ||
| MacGregor RC | MGB8346HV | Hobby |
8.4V 631.9 oz-in45.50 kg-cm4.5 N-m 7.4V 555.5 oz-in40.00 kg-cm3.9 N-m 6.0V 444.4 oz-in32.00 kg-cm3.1 N-m 5.0V 361.1 oz-in26.00 kg-cm2.5 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 5.0V 0.17 s/60°352.9 deg/s58.8 RPM |
3.5–5.5 A3500–5500 mA | 2.95 oz83.7 g | 1.60×0.83×1.48 in 40.6×21.1×37.6 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | IP67 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.93–11.68 W | Boxed | — | — | 300.000 | — | — | — | — | — | 0.610 A @ 8.4V610 mA @ 8.4V | (add) | (add) | — | — | ||
| MacGregor RC | MGB8555HV | Hobby |
8.4V 759.6 oz-in54.70 kg-cm5.4 N-m 7.4V 669.4 oz-in48.20 kg-cm4.7 N-m 6.0V 543.0 oz-in39.10 kg-cm3.8 N-m 5.0V 452.7 oz-in32.60 kg-cm3.2 N-m |
8.4V 0.12 s/60°500.0 deg/s83.3 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM 5.0V 0.20 s/60°300.0 deg/s50.0 RPM |
5.1–8.2 A5100–8200 mA | 3.00 oz85.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | 1500 µs | 2 µs | (add) | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Waterproof | (add) | JR (Universal) | 310 mm12.20 in | (add) | 4.19–11.70 W | Boxed | — | — | 378.000 | — | — | — | — | — | 1.000 A @ 8.4V1,000 mA @ 8.4V | (add) | (add) | — | — | ||
| MayTech | MT-AS014 * | Hobby | 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m | 6.0V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 1.83 oz52.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.96 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-AS015 * | Hobby | 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m | 6.0V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 1.83 oz52.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.2 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.44 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-AS017 * | Hobby | 6.0V 180.5 oz-in13.00 kg-cm1.3 N-m | 6.0V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.09 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-AS020 * | Hobby | 4.8V 97.2 oz-in7.00 kg-cm0.7 N-m | 4.8V 0.40 s/60°150.0 deg/s25.0 RPM | (add) | 1.98 oz56.0 g | 1.58×0.91×0.97 in 40.1×23.0×24.6 mm | — | Low Profile | (add) | (add) | (add) | Metal | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.45 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-AS024 * | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 4.8V 122.2 oz-in8.80 kg-cm0.9 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.26–1.60 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS005 * | Hobby | 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m | 6.0V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS006 * | Hobby | 6.0V 180.5 oz-in13.00 kg-cm1.3 N-m | 6.0V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.77 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS007 * | Hobby | 6.0V 208.3 oz-in15.00 kg-cm1.5 N-m | 6.0V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.8×20.1×38.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 5.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS012 * | Hobby |
6.0V 100.0 oz-in7.20 kg-cm0.7 N-m 4.8V 91.7 oz-in6.60 kg-cm0.6 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.94 oz55.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.21–1.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS013 * | Hobby |
6.0V 119.4 oz-in8.60 kg-cm0.8 N-m 4.8V 111.1 oz-in8.00 kg-cm0.8 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.47–1.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS014 * | Hobby |
6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.33–3.14 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| MayTech | MT-DS015 * | Hobby |
7.4V 159.7 oz-in11.50 kg-cm1.1 N-m 6.0V 145.8 oz-in10.50 kg-cm1.0 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.79×1.46 in 40.5×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.00–4.22 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Maytech | MT-DS35M | Hobby | 8.4V 486.1 oz-in35.00 kg-cm3.4 N-m | 8.4V 0.07 s/60°857.1 deg/s142.9 RPM | (add) | 2.82 oz80.0 g | 1.58×0.79×1.60 in 40.1×20.1×40.6 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 12.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Megatech | FX220MG * | Hobby | 4.8V 165.0 oz-in11.88 kg-cm1.2 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 1.97 oz55.9 g | 1.60×0.70×1.50 in 40.6×17.8×38.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.03 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS2014H | Hobby |
7.4V 313.8 oz-in22.60 kg-cm2.2 N-m 6.6V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 316.6 oz-in22.80 kg-cm2.2 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.6V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°413.8 deg/s69.0 RPM |
(add) | 2.62 oz74.3 g | (add) | — | Unknown | Aluminum | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.95–4.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS2512H | Hobby |
7.4V 325.0 oz-in23.40 kg-cm2.3 N-m 6.6V 347.3 oz-in25.01 kg-cm2.5 N-m 6.0V 318.1 oz-in22.91 kg-cm2.2 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.6V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.67 oz75.8 g | (add) | — | Unknown | Aluminum / Plastic | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Unknown | 4.52–5.46 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Metric Hobby | BLS3015H | Hobby |
7.4V 455.5 oz-in32.80 kg-cm3.2 N-m 6.6V 416.7 oz-in30.01 kg-cm2.9 N-m 6.0V 376.3 oz-in27.10 kg-cm2.7 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.6V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°363.6 deg/s60.6 RPM |
(add) | 2.71 oz76.7 g | (add) | — | Unknown | Aluminum / Plastic | Brushless | (add) | Stainless steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Unknown | 4.22–6.02 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Lynxmotion
Stall Current: 0.35–0.65 A350–650 mA
Shaft Power: —
Weight: 2.05 oz58.0 g
Size Class: Large
Diameter: —
Dimensions: 2.01×1.02×1.51 in 51.0×26.0×38.3 mm
Case Material: Plastic
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: PWM / Serial
Programmable: Yes
Op. Voltage: 6.5–12.6 V
Power Source: 3S LiPo
Regulator Type: (add)
Temperature: ≤35°C≤95.0°F
Water Rating: (add)
Certification: (add)
Connector: Molex
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 253.000
Baud Rate: 9.6 Kbps–921.6 Kbps
Output Power: 1.0 W
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: 2.1–2.4 A2100–2400 mA
Shaft Power: 1.52–2.14 W
Weight: 1.96 oz55.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.59 in 40.4×20.3×40.4 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 200.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: (add)
Shaft Power: 2.94–4.34 W
Weight: 2.08 oz59.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.44 in 40.4×20.1×36.6 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: (add)
Shaft Power: 5.61–8.99 W
Weight: 2.54 oz72.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: 4.5–7.1 A4500–7100 mA
Shaft Power: 4.77–12.84 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.30 in 36.1×15.0×33.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 220 mm8.66 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 214.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: 6.6–10.3 A6600–10300 mA
Shaft Power: 5.91–21.57 W
Weight: 3.14 oz89.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 39.9×20.1×39.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 214.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: 3.5–5.5 A3500–5500 mA
Shaft Power: 3.93–11.68 W
Weight: 2.95 oz83.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.83×1.48 in 40.6×21.1×37.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 300.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MacGregor RC
Stall Current: 5.1–8.2 A5100–8200 mA
Shaft Power: 4.19–11.70 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 310 mm12.20 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 378.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 0.96 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 1.44 W
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 2.09 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 0.45 W
Weight: 1.98 oz56.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.58×0.91×0.97 in 40.1×23.0×24.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 1.26–1.60 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 2.57 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 4.77 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 5.50 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.8×20.1×38.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 1.21–1.42 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 1.47–1.84 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 2.33–3.14 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: MayTech
Stall Current: (add)
Shaft Power: 3.00–4.22 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.46 in 40.5×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Maytech
Stall Current: (add)
Shaft Power: 12.84 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.60 in 40.1×20.1×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Megatech
Stall Current: (add)
Shaft Power: 2.03 W
Weight: 1.97 oz55.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.70×1.50 in 40.6×17.8×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: 3.95–4.84 W
Weight: 2.62 oz74.3 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: 4.52–5.46 W
Weight: 2.67 oz75.8 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Unknown
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Metric Hobby
Stall Current: (add)
Shaft Power: 4.22–6.02 W
Weight: 2.71 oz76.7 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Unknown
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.