Lynxmotion LSS-HT1

Search Amazon Search eBay

Compatible Hardware

Amazon eBay

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-10

Identity
Brand
Product Number	LSS-HT1
Category	Robotics
Performance
Torque	12.0V80.54 oz-in
Speed	12.0V 0.17 sec/60° 6.0V 0.33 sec/60°
Stall Current	0.55–1.2 AAbove Average
Rated Output Power	2.4 W
Physical
Weight	2.82 ozAverage
Shape	Boxed
Dimensions	L 2.008 in W 1.024 in H 1.508 in
Case Material	Aluminum / Plastic
Drivetrain
Motor Type	Coreless
Gears	Steel
Gear Ratio	320:1
Gear Spline/Teeth	24 T
Rotation Mode	Continuous
Rotation/Support	Dual Bearings
Control & Signal
Modulation	Digital
Rotational Range	360°
Angle Sensor	Magnetic Encoder
Control System	PWM / Serial
Programmable	Yes
MCU	Cortex M0
Signal Voltage	5V
Electrical & Environment
Operating Voltage	6.5–12.6 V
Power Source	3S LiPo
Temperature	0–35 °C
Idle Current	0.070 A
Connectivity
Connector	Molex
Wire Length	150 mm
Baud Rate	9.6 Kbps–921.6 Kbps

Submit Missing Data Report an Error

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Compatible Hardware

Amazon eBay

*Based on known specs.

Class Comparison

Weight	Average Lighter than 56% of 143 Digital Large servos
Stall Current	Above Average Lower draw than 90% of 97 Digital Large servos

Performance Analysis

Torque Density	1.0068 oz-in/g
Torque-to-Volume Ratio	25.97 oz-in/in³
Speed-to-Weight	0.03754 (1/sec·g)
Speed-Torque Trade-off	26.82
Current-per-Torque Ratio	0.0149 A/oz-in
Voltage Range Width	6.1 V Wider voltage range than 85% of 131 Digital Large servos

Notes

Coreless DC motor; Stainless steel gears; ABS plastic top/bottom with Aluminum center case; continuous rotation supported; TTL serial + RC PWM; temperature shutdown at 90°C; two radial ball bearings on output spline; 2.4W max mechanical power output