Discover XQ-Power Servos in Our eBay Store!

Shop Now
Lynxmotion LSS-ST1
Robotics

Lynxmotion LSS-ST1

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-10
Identity
Brand Lynxmotion
Product Number LSS-ST1
Category Robotics
Performance
Torque
12.0V38.88 oz-in
Speed
12.0V 0.17 sec/60°
6.0V 0.33 sec/60°
Running Current (add)
Stall Current 0.35–0.65 A
Rated Output Power 1.0 W
Radial Load (add)
Physical
Weight 2.05 oz
Shape Boxed
Dimensions L 2.01 in
W 1.02 in
H 1.51 in
Shaft Size (add)
Case Material Plastic
Drivetrain
Motor Type Cored
Motor Drive (add)
Gears Metal
Gear Ratio 253:1
Gear Spline/Teeth 24 T
Rotation Mode Continuous
Rotation/Support Dual Bearings
Backlash (add)
Control & Signal
Modulation Digital
Direction (add)
Rotational Range 360°
Mechanical Limit (add)
Pulse Cycle (add)
Pulse Width (add)
Neutral Position (add)
Dead Band (add)
Refresh Rate (add)
Angle Sensor Magnetic Encoder
Control System PWM / Serial
Programmable Yes
Resolution (add)
MCU (add)
Operating Modes (add)
Signal Voltage 5V
Electrical & Environment
Operating Voltage 6.5–12.6 V
Power Source 3S LiPo
Regulator Type (add)
Temperature 0–35 °C
Water Rating (add)
Certification (add)
Idle Current 70.000 A
Connectivity
Connector Molex
Wire Length (add)
Baud Rate 9.6 Kbps–921.6 Kbps
Origin
Country of Origin (add)

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Notes

Cored DC motor; Brass gears; 3-part ABS plastic case; continuous rotation supported; TTL serial + RC PWM; temperature shutdown at 75°C; two radial ball bearings on output spline

Similar Active Servos

Reviews of Lynxmotion LSS-ST1

Be the first to review!

Submit a review of Lynxmotion LSS-ST1