Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-10
|
Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | RB-Lyn-1160 |
| Category | Robotics |
| Performance | |
| Torque |
36.0V31,154.60 oz-in2,243.37 kg-cm220.0 N-m |
| Speed |
36.0V10.00 sec/60°6.0 deg/s1.0 RPM |
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 5.76 W |
| Rated Output Power | (add) |
| Radial Load | (add) |
| Physical | |
| Weight | 158.73 oz4,500.0 g |
| Shape | Boxed |
| Dimensions |
L 6.89 in W 5.39 in H 4.88 in L 175.1 mm W 136.9 mm H 124.0 mm |
| Shaft Size | (add) |
| Case Material | Aluminum |
| Drivetrain | |
| Motor Type | Stepper |
| Motor Drive | Stepper |
| Gears | Steel |
| Gear Ratio | 100:1 |
| Gear Spline/Teeth | (add) |
| Rotation Mode | (add) |
| Rotation/Support | (add) |
| Backlash | 0.003° |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | 360° |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | Magnetic Encoder |
| Control System | CAN / Serial |
| Programmable | Yes |
| Resolution | (add) |
| MCU | (add) |
| Operating Modes | (add) |
| Signal Voltage | 5V |
| Electrical & Environment | |
| Operating Voltage | 18–40 V |
| Power Source | 8S LiPo |
| Regulator Type | (add) |
| Temperature | 10–30 °C50–86 °F |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | XT60 |
| Wire Length | (add) |
| Baud Rate | 115.2 Kbps |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Notes
All metal strain wave gear coupled to NEMA 34 stepper motor. STM32 MCU. Highest torque in LSS PRO series. Daisy-chainable via RJ45 CAN bus and XT60 power. IMU included. IP20. Static torque N/A (cannot move at max holding). Drop in torque between 3.5rpm to 6rpm noted.
Quick Actions
Similar Active Servos
Reviews of Lynxmotion LSS-P-M1
Be the first to review!