Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Align | DS610 * | Hobby |
6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 4.8V 133.3 oz-in9.60 kg-cm0.9 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.85 oz52.5 g | 1.64×0.82×1.47 in 41.7×20.8×37.3 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1520 µs | (add) | 200 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 2.46–3.85 W | — | — | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Align | DS620 * | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 4.8V 111.1 oz-in8.00 kg-cm0.8 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.84 oz52.2 g | 1.64×0.82×1.47 in 41.7×20.8×37.3 mm | — | Standard | (add) | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.28–3.67 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Align | DS650 * | Hobby |
6.0V 69.4 oz-in5.00 kg-cm0.5 N-m 4.8V 55.5 oz-in4.00 kg-cm0.4 N-m |
6.0V 0.05 s/60°1,250.0 deg/s208.3 RPM 4.8V 0.06 s/60°1,034.5 deg/s172.4 RPM |
(add) | 1.98 oz56.0 g | 1.64×0.82×1.47 in 41.7×20.8×37.3 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 120° | (add) | 3 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.77–2.67 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Align | DS820 | Hobby |
8.4V 811.3 oz-in58.42 kg-cm5.7 N-m 7.4V 776.0 oz-in55.88 kg-cm5.5 N-m |
8.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.47 oz70.0 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | Metal / Plastic | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 23.91–27.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Align | DS820M | Hobby |
8.4V 811.3 oz-in58.42 kg-cm5.7 N-m 7.4V 776.0 oz-in55.88 kg-cm5.5 N-m |
8.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.82 oz80.0 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | Metal | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 23.91–27.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Align | DS825 | Hobby |
8.4V 440.9 oz-in31.75 kg-cm3.1 N-m 7.4V 352.7 oz-in25.40 kg-cm2.5 N-m |
8.4V 0.02 s/60°3,000.0 deg/s500.0 RPM 7.4V 0.03 s/60°2,000.0 deg/s333.3 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | Metal / Plastic | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | 360 mm14.17 in | (add) | 21.74–40.76 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Align | DS825M | Hobby |
8.4V 440.9 oz-in31.75 kg-cm3.1 N-m 7.4V 352.7 oz-in25.40 kg-cm2.5 N-m |
8.4V 0.02 s/60°3,000.0 deg/s500.0 RPM 7.4V 0.03 s/60°2,000.0 deg/s333.3 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | Metal | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 21.74–40.76 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Align | DS830M | Hobby |
8.4V 811.3 oz-in58.42 kg-cm5.7 N-m 7.4V 776.0 oz-in55.88 kg-cm5.5 N-m |
8.4V 0.06 s/60°1,090.9 deg/s181.8 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.82 oz80.0 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | Metal | Brushless | (add) | Steel | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | (add) | (add) | (add) | 23.91–27.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | AAS-850MG | Hobby |
6.0V 348.0 oz-in25.06 kg-cm2.5 N-m 4.8V 262.0 oz-in18.87 kg-cm1.9 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 3.60 oz102.0 g | 1.72×0.79×1.69 in 43.7×20.1×42.9 mm | — | Large | (add) | 3-pole | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 80° | (add) | (add) | 1500–1900 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.03–4.95 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABDS-992HTG | Hobby |
7.4V 196.0 oz-in14.11 kg-cm1.4 N-m 6.0V 152.0 oz-in10.95 kg-cm1.1 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.56–4.03 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABDS-992HTG+HV | Hobby |
7.4V 196.0 oz-in14.11 kg-cm1.4 N-m 6.0V 152.0 oz-in10.95 kg-cm1.1 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.56–4.03 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABDS-996HTG | Hobby |
6.0V 176.0 oz-in12.67 kg-cm1.2 N-m 4.8V 218.0 oz-in15.70 kg-cm1.5 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.03–2.24 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABDS-996HTG+HV | Hobby |
7.4V 313.0 oz-in22.54 kg-cm2.2 N-m 6.0V 270.0 oz-in19.44 kg-cm1.9 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.12–4.13 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABDS-997HTG | Hobby |
6.0V 135.0 oz-in9.72 kg-cm1.0 N-m 4.8V 92.0 oz-in6.62 kg-cm0.6 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.55–2.77 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABDS-997HTG+HV | Hobby |
7.4V 149.0 oz-in10.73 kg-cm1.1 N-m 6.0V 129.0 oz-in9.29 kg-cm0.9 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.65–3.94 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ABRS-5314HTG+HV | Robotics |
12.0V 708.0 oz-in50.98 kg-cm5.0 N-m 8.3V 466.0 oz-in33.56 kg-cm3.3 N-m 7.4V 348.0 oz-in25.06 kg-cm2.5 N-m |
12.0V 0.14 s/60°428.6 deg/s71.4 RPM 8.3V 0.16 s/60°375.0 deg/s62.5 RPM 7.4V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.86 oz81.0 g | 1.69×1.25×1.28 in 42.9×31.8×32.5 mm | (add) | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 280° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.57–9.35 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| Alturn | ADS-850MG | Hobby |
6.0V 348.0 oz-in25.06 kg-cm2.5 N-m 4.8V 262.0 oz-in18.87 kg-cm1.9 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 3.60 oz102.0 g | 1.72×0.79×1.69 in 43.7×20.1×42.9 mm | — | Large | (add) | 3-pole | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–1900 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.03–4.95 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ADS-880MG | Hobby |
6.0V 348.0 oz-in25.06 kg-cm2.5 N-m 4.8V 262.0 oz-in18.87 kg-cm1.9 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 4.80 oz136.0 g | 1.72×0.79×1.69 in 43.7×20.1×42.9 mm | — | Large | (add) | 3-pole | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–1900 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.03–4.95 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ADS-967HTG | Hobby |
6.0V 120.0 oz-in8.64 kg-cm0.8 N-m 4.8V 105.0 oz-in7.56 kg-cm0.7 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.05 oz58.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.94–3.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ADS-982HTG+HV | Hobby |
7.2V 152.0 oz-in10.95 kg-cm1.1 N-m 6.0V 152.0 oz-in10.95 kg-cm1.1 N-m |
7.2V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.56–3.12 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ADS-986HTG+HV | Hobby |
7.2V 313.0 oz-in22.54 kg-cm2.2 N-m 6.0V 270.0 oz-in19.44 kg-cm1.9 N-m |
7.2V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.12–4.45 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | ADS-987HTG+HV | Hobby |
7.2V 149.0 oz-in10.73 kg-cm1.1 N-m 6.0V 129.0 oz-in9.29 kg-cm0.9 N-m |
7.2V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.98 oz56.0 g | 1.56×0.74×1.54 in 39.6×18.8×39.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 80° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.98–4.59 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | AHBS-1203HTG+HV | Hobby |
8.4V 174.0 oz-in12.53 kg-cm1.2 N-m 7.4V 153.0 oz-in11.02 kg-cm1.1 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 2.75 oz78.0 g | 1.57×0.83×1.59 in 39.9×21.1×40.4 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.30–8.04 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | AHBS-2407HTG+HV | Hobby |
8.4V 344.0 oz-in24.77 kg-cm2.4 N-m 7.4V 313.0 oz-in22.54 kg-cm2.2 N-m 6.0V 253.0 oz-in18.22 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.75 oz78.0 g | 1.57×0.83×1.59 in 39.9×21.1×40.4 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.68–9.09 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Alturn | AHBS-3713HTG+HV | Hobby |
8.4V 517.0 oz-in37.23 kg-cm3.7 N-m 7.4V 396.0 oz-in28.52 kg-cm2.8 N-m 6.0V 344.0 oz-in24.77 kg-cm2.4 N-m |
8.4V 0.13 s/60°461.5 deg/s76.9 RPM 7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.75 oz78.0 g | 1.57×0.83×1.59 in 39.9×21.1×40.4 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 1500–2000 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.74–7.35 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Align
Stall Current: (add)
Shaft Power: 2.46–3.85 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.82×1.47 in 41.7×20.8×37.3 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 2.28–3.67 W
Weight: 1.84 oz52.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.82×1.47 in 41.7×20.8×37.3 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 1.77–2.67 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.82×1.47 in 41.7×20.8×37.3 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 23.91–27.27 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: Metal / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 23.91–27.27 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 21.74–40.76 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: Metal / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 360 mm14.17 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 21.74–40.76 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Align
Stall Current: (add)
Shaft Power: 23.91–27.27 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: Metal
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.03–4.95 W
Weight: 3.60 oz102.0 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.79×1.69 in 43.7×20.1×42.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–1900 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 2.56–4.03 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 2.56–4.03 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 2.03–2.24 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.12–4.13 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 1.55–2.77 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 2.65–3.94 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.57–9.35 W
Weight: 2.86 oz81.0 g
Size Class: Large
Diameter: —
Dimensions: 1.69×1.25×1.28 in 42.9×31.8×32.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 280°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.03–4.95 W
Weight: 3.60 oz102.0 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.79×1.69 in 43.7×20.1×42.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–1900 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.03–4.95 W
Weight: 4.80 oz136.0 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.79×1.69 in 43.7×20.1×42.9 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–1900 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 1.94–3.17 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 2.56–3.12 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.12–4.45 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 2.98–4.59 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.74×1.54 in 39.6×18.8×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 80°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.30–8.04 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.59 in 39.9×21.1×40.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 4.68–9.09 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.59 in 39.9×21.1×40.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Alturn
Stall Current: (add)
Shaft Power: 3.74–7.35 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.59 in 39.9×21.1×40.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1500–2000 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.