Discover XQ-Power Servos in Our eBay Store!

Shop Now
Align DS830M
Standard

Align DS830M

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-28
Identity
Brand Align
Product Number 01-HSD83001
Category Hobby
Performance
Torque
8.4V 319.47 oz-in
7.4V 305.58 oz-in Above Average
Speed
8.4V 0.06 sec/60°
7.4V 0.06 sec/60° Top 10%
Physical
Weight 2.82 ozBelow Average
Dimensions L 1.575 in
W 0.787 in
H 1.535 in
Case Material Metal
Drivetrain
Motor Type Brushless
Gears Steel
Gear Spline/Teeth 25 T estimate
Control & Signal
Modulation Digital
Neutral Position 1520 µs
Refresh Rate 200 Hz
Control System PWM
Electrical & Environment
Operating Voltage 7.4–8.4 V
Temperature -20–60 °C
Connectivity
Wire Length 140 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 69% of 1060 Digital Standard servos at 7.4V
SpeedTop 10%
Faster than 94% of 1045 Digital Standard servos at 7.4V
WeightBelow Average
Lighter than 11% of 1880 Digital Standard servos

Performance Analysis

Shaft Power 9.42–10.74 W
Power Density5.641 W/in³
More power-dense than 83% of 1768 Digital Standard servos
Torque Density3.8198 oz-in/g
Stronger than 57% of 1053 Digital Standard servos
Torque-to-Volume Ratio160.50 oz-in/in³
Denser torque than 69% of 1058 Digital Standard servos
Speed-to-Weight0.20833 (1/sec·g)
Faster than 88% of 1038 Digital Standard servos
Speed-Torque Trade-off18.33
Better balanced than 32% of 1034 Digital Standard servos
Torque Gain per Volt4.55%/V
More voltage-responsive (torque) than 2% of 873 Digital Standard servos
Speed Gain per Volt9.09%/V
More voltage-responsive (speed) than 11% of 874 Digital Standard servos
Voltage Range Width1.0 V
Wider voltage range than 3% of 1560 Digital Standard servos

Similar Active Servos

Reviews (3)

Includes 3 reviews aggregated from around the web.

There are very few reviews for this servo on the web. One owner who fitted it as the main rotor servo on a TN70 reported heavy shaking at spool-up that lowering the frame rate did not fix, and the cause was not clear from the post.

Be the first to review!

Submit a review of Align DS830M