Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-23
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | SB2292SG |
| Category | Hobby |
| Performance | |
| Torque |
8.4V
624.90 oz-in
45.00 kg-cm
4.4 N-m
7.4V
430.50 oz-in
31.00 kg-cm
3.0 N-m
6.0V
305.50 oz-in
22.00 kg-cm
2.2 N-m
Above Average
|
| Speed |
8.4V
0.06 sec/60°
1,090.9 deg/s
181.8 RPM
7.4V
0.07 sec/60°
857.1 deg/s
142.9 RPM
6.0V
0.09 sec/60°
705.9 deg/s
117.6 RPM
Above Average
|
| Running Current |
7.4V
0.220 A
220 mA
6.0V
0.180 A
180 mA
Average
|
| Stall Current | 7.5–10.5 A7500–10500 mABottom 10% |
| Physical | |
| Weight | 2.79 oz79.0 gBelow Average |
| Dimensions |
L 1.587 in W 0.795 in H 1.524 in L 40.3 mm W 20.2 mm H 38.7 mm |
| Case Material | Aluminum |
| Drivetrain | |
| Motor Type | Brushless |
| Gears | Steel |
| Gear Spline/Teeth | 25 T |
| Rotation Mode | Positional |
| Rotation/Support | Triple Bearings |
| Control & Signal | |
| Modulation | Digital |
| Rotational Range | 100° |
| Mechanical Limit | 130° |
| Pulse Width | 800-2200 µs |
| Neutral Position | 1500 µs |
| Refresh Rate | 333 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 6–8.4 V |
| Temperature | -10–50 °C14–122 °F |
| Water Rating | Water Resistant |
| Idle Current | 0.005 A5 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 68% of 1060 Digital Standard servos at 6.0V |
| Speed | Above Average Faster than 86% of 1045 Digital Standard servos at 6.0V |
| Weight | Below Average Lighter than 13% of 1880 Digital Standard servos |
| Running Current | Average Lower draw than 61% of 226 Digital Standard servos at 6.0V |
| Stall Current | Bottom 10% Lower draw than 1% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 6.65–21.01 W |
| Power Density | 10.927 W/in³ More power-dense than 99% of 1768 Digital Standard servos |
| Torque Density | 3.8671 oz-in/g Stronger than 58% of 1053 Digital Standard servos |
| Torque-to-Volume Ratio | 158.91 oz-in/in³ Denser torque than 69% of 1058 Digital Standard servos |
| Speed-to-Weight | 0.14892 (1/sec·g) Faster than 73% of 1038 Digital Standard servos |
| Speed-Torque Trade-off | 25.97 Better balanced than 46% of 1034 Digital Standard servos |
| Current-per-Torque Ratio | 0.0344 A/oz-in More efficient than 10% of 331 Digital Standard servos |
| Idle-to-Running Current Ratio | 0.028 Lower idle draw than 76% of 167 Digital Standard servos |
| No-Load vs Stall Current Spread | 58.33 Narrower current spread than 4% of 179 Digital Standard servos |
| Torque Gain per Volt | 43.56%/V More voltage-responsive (torque) than 99% of 873 Digital Standard servos |
| Speed Gain per Volt | 22.73%/V More voltage-responsive (speed) than 88% of 874 Digital Standard servos |
| Voltage Range Width | 2.4 V Wider voltage range than 61% of 1560 Digital Standard servos |
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are very few reviews for this servo on the web. One hobbyist who paid about $150 per servo says his are still working perfectly after more than two years of abuse, some of it severe. A robotics-competition commenter names it the best option for high speed with strong torque but notes the high price. No failures were reported.
Be the first to review!