Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hitec | HS-900SGS * | Hobby |
14.9V 1,208.0 oz-in86.99 kg-cm8.5 N-m 11.1V 903.0 oz-in65.02 kg-cm6.4 N-m |
14.9V 0.15 s/60°400.0 deg/s66.7 RPM 11.1V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 12.80 oz363.0 g | 2.52×1.30×2.87 in 64.0×33.0×72.9 mm | — | Giant | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 11.1–14.8 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.35–14.89 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-925MG * | Hobby |
6.0V 106.9 oz-in7.70 kg-cm0.8 N-m 4.8V 66.7 oz-in4.80 kg-cm0.5 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.00 oz56.7 g | 1.55×0.78×1.48 in 39.4×19.8×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.62–1.80 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-945MG * | Hobby |
6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 122.2 oz-in8.80 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.97 oz55.9 g | 1.55×0.78×1.48 in 39.4×19.8×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.41–2.35 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-965MG * | Hobby |
6.0V 131.9 oz-in9.50 kg-cm0.9 N-m 4.8V 102.7 oz-in7.40 kg-cm0.7 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.46–2.44 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-985MG * | Hobby |
6.0V 172.2 oz-in12.40 kg-cm1.2 N-m 4.8V 133.3 oz-in9.60 kg-cm0.9 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Analog | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.54–2.45 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HS-M7990TH * | Hobby |
7.4V 611.0 oz-in44.00 kg-cm4.3 N-m 6.0V 500.0 oz-in36.00 kg-cm3.5 N-m |
7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 2.79 oz79.0 g | 1.72×0.88×1.58 in 43.8×22.4×40.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 1050–1950 µs | 1500 µs | (add) | (add) | (add) | PWM | Yes | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.40–6.65 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSB-9360TH | Hobby |
7.4V 236.0 oz-in16.99 kg-cm1.7 N-m 6.0V 236.0 oz-in16.99 kg-cm1.7 N-m |
7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
≤2.7 A≤2700 mA | 2.40 oz68.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | Plastic | Brushless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | Yes | 4–8.4 V | (add) | (add) | (add) | IP54 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 5.45–7.27 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 27.000 A27,000 mA | — | — | ||
| Hitec | HSB-9370TH | Hobby |
7.4V 347.0 oz-in24.99 kg-cm2.5 N-m 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.40 oz68.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | Brushless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | (add) | PWM | Yes | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 5.35–6.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSB-9380TH | Hobby |
7.4V 472.0 oz-in33.99 kg-cm3.3 N-m 6.0V 472.0 oz-in33.99 kg-cm3.3 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
≤2.1 A≤2100 mA | 2.40 oz68.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | Brushless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | Yes | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 5.13–6.23 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 27.000 A27,000 mA | — | — | ||
| Hitec | HSB-9381TH | Hobby |
7.4V 472.0 oz-in33.99 kg-cm3.3 N-m 6.0V 472.0 oz-in33.99 kg-cm3.3 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | 1 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.13–6.23 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSB-9465SH * | Hobby |
7.4V 187.0 oz-in13.47 kg-cm1.3 N-m 6.0V 187.0 oz-in13.47 kg-cm1.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
≤1.1 A≤1100 mA | 2.19 oz62.0 g | 1.58×0.79×1.48 in 40.0×20.0×37.7 mm | — | Standard | Plastic | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | Yes | 4–8.4 V | (add) | (add) | (add) | IP54 | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.84–4.94 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 30.000 A30,000 mA | — | — | ||
| Hitec | HSB-9475SH * | Hobby |
7.4V 269.0 oz-in19.37 kg-cm1.9 N-m 6.0V 269.0 oz-in19.37 kg-cm1.9 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | (add) | PWM | Yes | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.83–4.97 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSB-9485SH | Hobby |
7.4V 361.0 oz-in25.99 kg-cm2.5 N-m 6.0V 361.0 oz-in25.99 kg-cm2.5 N-m |
7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | 2 µs | (add) | (add) | PWM | Yes | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.71–4.45 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSC-5995TG * | Hobby |
7.4V 417.0 oz-in30.03 kg-cm2.9 N-m 6.0V 334.0 oz-in24.05 kg-cm2.4 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.19 oz62.1 g | 1.57×0.79×1.46 in 39.9×20.1×37.1 mm | — | Standard | (add) | (add) | (add) | Titanium | 24 | Dual Bearings | Digital | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.12–6.43 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSC-5996TG * | Hobby |
6.0V 181.0 oz-in13.03 kg-cm1.3 N-m 4.8V 89.0 oz-in6.41 kg-cm0.6 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.17 oz61.5 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | Titanium | 24 | Dual Bearings | Digital | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.27–3.35 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSC-5997TG * | Hobby |
6.0V 250.0 oz-in18.00 kg-cm1.8 N-m 4.8V 135.0 oz-in9.72 kg-cm1.0 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.17 oz61.5 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | Titanium | 24 | Dual Bearings | Digital | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.47–3.30 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSC-5998TG * | Hobby |
6.0V 82.0 oz-in5.90 kg-cm0.6 N-m 4.8V 200.0 oz-in14.40 kg-cm1.4 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 2.17 oz61.5 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | Titanium | 24 | Dual Bearings | Digital | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.80–1.61 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSG-8315BH * | Hobby |
7.4V 74.0 oz-in5.33 kg-cm0.5 N-m 6.0V 60.0 oz-in4.32 kg-cm0.4 N-m |
7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.12 oz60.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Karbonite | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.22–3.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSR-2645CR | Robotics |
7.4V 167.0 oz-in12.03 kg-cm1.2 N-m 6.0V 139.0 oz-in10.01 kg-cm1.0 N-m 4.8V 111.0 oz-in7.99 kg-cm0.8 N-m |
7.4V 25,920.00 s/60°0.0 deg/s0.0 RPM 6.0V 20,880.00 s/60°0.0 deg/s0.0 RPM 4.8V 17,280.00 s/60°0.0 deg/s0.0 RPM |
(add) | 1.87 oz53.0 g | 1.59×0.77×1.48 in 40.4×19.6×37.6 mm | (add) | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.00 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| Hitec | HSR-5498SG * | Hobby |
7.4V 187.5 oz-in13.50 kg-cm1.3 N-m 6.0V 152.7 oz-in11.00 kg-cm1.1 N-m |
7.4V 0.19 s/60°315.8 deg/s52.6 RPM 6.0V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.11 oz59.9 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | 3-pole | (add) | Metal | 24 | Dual Bearings | Digital | (add) | 360° | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 1.28–1.82 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSR-5980SG * | Hobby |
7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.47 oz70.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Coreless | (add) | Metal | 24 | Dual Bearings | Digital | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.63–5.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSR-5990TG * | Hobby |
7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.40 oz68.0 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | Coreless | (add) | Titanium | 24 | Dual Bearings | Digital | (add) | 180° | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.63–5.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSR-5995TG * | Hobby |
7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.17 oz61.5 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | 24 | Dual Bearings | Digital | (add) | 180° | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.11–6.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | HSR-8498HB * | Hobby |
7.4V 125.0 oz-in9.00 kg-cm0.9 N-m 6.0V 102.8 oz-in7.40 kg-cm0.7 N-m |
7.4V 0.18 s/60°333.3 deg/s55.6 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 1.93 oz54.7 g | 1.57×0.78×1.45 in 39.9×19.8×36.8 mm | — | Standard | (add) | 3-pole | (add) | Plastic | 24 | Dual Bearings | Digital | (add) | (add) | (add) | 20 ms | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.95–1.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hitec | MD950TW | Hobby |
7.4V 486.0 oz-in35.00 kg-cm3.4 N-m 4.8V 292.0 oz-in21.03 kg-cm2.1 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 2.40 oz68.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1 µs | (add) | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.35–6.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Hitec
Stall Current: (add)
Shaft Power: 8.35–14.89 W
Weight: 12.80 oz363.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.30×2.87 in 64.0×33.0×72.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 11.1–14.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.62–1.80 W
Weight: 2.00 oz56.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.78×1.48 in 39.4×19.8×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.41–2.35 W
Weight: 1.97 oz55.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.78×1.48 in 39.4×19.8×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.46–2.44 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.54–2.45 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.40–6.65 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.72×0.88×1.58 in 43.8×22.4×40.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1050–1950 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤2.7 A≤2700 mA
Shaft Power: 5.45–7.27 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 5.35–6.42 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤2.1 A≤2100 mA
Shaft Power: 5.13–6.23 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 5.13–6.23 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: ≤1.1 A≤1100 mA
Shaft Power: 3.84–4.94 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.48 in 40.0×20.0×37.7 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP54
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 3.83–4.97 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 3.71–4.45 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.12–6.43 W
Weight: 2.19 oz62.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.46 in 39.9×20.1×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.27–3.35 W
Weight: 2.17 oz61.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.47–3.30 W
Weight: 2.17 oz61.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.80–1.61 W
Weight: 2.17 oz61.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 2.22–3.42 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Karbonite
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.00 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.48 in 40.4×19.6×37.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 1.28–1.82 W
Weight: 2.11 oz59.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 3.63–5.50 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 3.63–5.50 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 4.11–6.42 W
Weight: 2.17 oz61.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 0.95–1.28 W
Weight: 1.93 oz54.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.45 in 39.9×19.8×36.8 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 24
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hitec
Stall Current: (add)
Shaft Power: 2.35–6.42 W
Weight: 2.40 oz68.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.