Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HSB-9381TH
Standard

Hitec HSB-9381TH

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-25
Identity
Brand Hitec
Product Number 39384S
Category Hobby
Performance
Torque
7.4V 472.00 oz-in
6.0V 472.00 oz-in Above Average
Speed
7.4V 0.14 sec/60°
6.0V 0.17 sec/60° Below Average
Running Current
7.4V 0.250 A
6.0V 0.250 A Average
Stall Current 2.1–2.7 AAbove Average
Physical
Weight 2.79 ozBelow Average
Dimensions L 1.57 in
W 0.79 in
H 1.50 in
Case Material Aluminum
Drivetrain
Motor Type Brushless
Motor Drive MOS
Gears Titanium / Steel
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Backlash 0.500°
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 158°
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 1 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 6–7.4 V
Temperature -20–60 °C
Water Rating IP54
Idle Current 0.027 A
Connectivity
Connector JR (Universal) estimate
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 89% of 1060 Digital Standard servos at 6.0V
SpeedBelow Average
Faster than 26% of 1045 Digital Standard servos at 6.0V
WeightBelow Average
Lighter than 14% of 1880 Digital Standard servos
Running CurrentAverage
Lower draw than 46% of 226 Digital Standard servos at 6.0V
Stall CurrentAbove Average
Lower draw than 70% of 570 Digital Standard servos

Performance Analysis

Shaft Power 5.13–6.23 W
Power Density3.351 W/in³
More power-dense than 64% of 1768 Digital Standard servos
Torque Density5.9747 oz-in/g
Stronger than 88% of 1053 Digital Standard servos
Torque-to-Volume Ratio253.70 oz-in/in³
Denser torque than 92% of 1058 Digital Standard servos
Speed-to-Weight0.07446 (1/sec·g)
Faster than 9% of 1038 Digital Standard servos
Speed-Torque Trade-off80.25
Better balanced than 93% of 1034 Digital Standard servos
Current-per-Torque Ratio0.0057 A/oz-in
More efficient than 98% of 331 Digital Standard servos
Idle-to-Running Current Ratio0.108
Lower idle draw than 33% of 167 Digital Standard servos
No-Load vs Stall Current Spread10.80
Narrower current spread than 71% of 179 Digital Standard servos
Torque Gain per Volt0.00%/V
More voltage-responsive (torque) than 0% of 873 Digital Standard servos
Speed Gain per Volt15.32%/V
More voltage-responsive (speed) than 49% of 874 Digital Standard servos
Voltage Range Width1.4 V
Wider voltage range than 32% of 1560 Digital Standard servos
Backlash-to-Range Ratio0.00316
Tighter backlash than 41% of 52 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0008
Finer dead band than 89% of 504 Digital Standard servos

Similar Active Servos

Reviews (3)

Includes 3 reviews aggregated from around the web.

There are very few reviews for this servo on the web. A Reddit owner of two says both developed a slight jitter after extended use.

Be the first to review!

Submit a review of Hitec HSB-9381TH