Discover XQ-Power Servos in Our eBay Store!
Shop NowFutaba Servos (211)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Futaba | S-A301 | Hobby |
7.4V 125.0 oz-in9.00 kg-cm0.9 N-m 6.0V 118.1 oz-in8.50 kg-cm0.8 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.66 oz47.1 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 1.56–1.78 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-A400 | Hobby |
7.4V 111.1 oz-in8.00 kg-cm0.8 N-m 6.0V 100.0 oz-in7.20 kg-cm0.7 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.62 oz45.9 g | 1.59×0.79×1.00 in 40.4×20.1×25.4 mm | — | Low Profile | (add) | (add) | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 2.05–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-A501 | Hobby |
7.4V 233.4 oz-in16.81 kg-cm1.6 N-m 6.0V 191.7 oz-in13.80 kg-cm1.4 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.20 oz62.4 g | 1.60×0.80×1.40 in 40.6×20.3×35.6 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 2.73–3.92 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-AG300 | Hobby |
6.0V 34.7 oz-in2.50 kg-cm0.2 N-m 4.8V 20.8 oz-in1.50 kg-cm0.1 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.38 oz10.8 g | 0.93×0.32×0.78 in 23.6×8.1×19.8 mm | — | Micro | (add) | Coreless | (add) | Hybrid | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 0.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-C400 | Hobby |
7.4V 111.1 oz-in8.00 kg-cm0.8 N-m 6.0V 91.6 oz-in6.60 kg-cm0.6 N-m |
7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.52 oz43.0 g | 1.59×0.79×1.00 in 40.5×20.0×25.4 mm | — | Low Profile | (add) | (add) | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | (add) | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 1.69–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-HC500 | Hobby |
7.4V 191.7 oz-in13.80 kg-cm1.4 N-m 6.6V 173.5 oz-in12.49 kg-cm1.2 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.6V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.90 oz54.0 g | 1.57×0.79×1.44 in 39.9×20.1×36.6 mm | — | Standard | (add) | Coreless | (add) | (add) | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 3.21–3.94 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-HC500 | Hobby |
7.4V 191.7 oz-in13.80 kg-cm1.4 N-m 6.6V 173.5 oz-in12.49 kg-cm1.2 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.6V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.90 oz54.0 g | 1.57×0.79×1.44 in 39.9×20.1×36.6 mm | — | Standard | (add) | Coreless | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 3.21–3.94 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-U300 | Hobby |
6.0V 56.9 oz-in4.10 kg-cm0.4 N-m 4.8V 44.4 oz-in3.20 kg-cm0.3 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.27 oz36.0 g | 1.59×0.78×1.42 in 40.4×19.8×36.0 mm | — | Standard | Plastic | 3-pole | (add) | Plastic | 25 | (add) | Digital | (add) | 90° | (add) | (add) | (add) | (add) | 2 µs | 70 Hz | Potentiometer | PWM | SBUS2 | Yes | 4.8–6 V | Direct | Direct | (add) | None | (add) | Futaba J | (add) | China | 0.36–0.55 W | — | 6.0 mm | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Futaba | S-U301 | Hobby |
7.4V 54.2 oz-in3.90 kg-cm0.4 N-m 6.6V 48.6 oz-in3.50 kg-cm0.3 N-m |
7.4V 0.16 s/60°375.0 deg/s62.5 RPM 6.6V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.27 oz36.0 g | 1.58×0.79×1.42 in 40.0×20.0×36.1 mm | — | Standard | (add) | 3-pole | (add) | Plastic | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.50–0.63 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-U305 | Hobby |
6.0V 123.6 oz-in8.90 kg-cm0.9 N-m 4.8V 98.6 oz-in7.10 kg-cm0.7 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.64 oz46.5 g | 1.58×0.79×1.50 in 40.0×20.0×38.1 mm | — | Standard | (add) | 3-pole | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | 920–2120 µs | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.79–1.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-U306 | Hobby |
6.0V 123.6 oz-in8.90 kg-cm0.9 N-m 4.8V 98.6 oz-in7.10 kg-cm0.7 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.64 oz46.5 g | 1.58×0.79×1.50 in 40.0×20.0×38.1 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | (add) | Digital | (add) | 60° | (add) | (add) | 1220–1820 µs | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.79–1.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-U400 | Hobby |
7.4V 109.7 oz-in7.90 kg-cm0.8 N-m 6.6V 98.6 oz-in7.10 kg-cm0.7 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.6V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.38 oz39.0 g | 1.59×0.79×1.50 in 40.4×20.1×38.1 mm | — | Standard | Plastic | 3-pole | (add) | Plastic | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | SBUS2 | Yes | 6.6–7.4 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 1.30–1.56 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Futaba | S110M * | Hobby | 4.8V 21.9 oz-in1.58 kg-cm0.2 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.22 oz6.2 g | 0.90×0.40×0.80 in 22.9×10.2×20.3 mm | — | Micro | (add) | (add) | (add) | (add) | 21 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Micro | (add) | (add) | 0.40 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S125 * | Hobby | 4.8V 129.3 oz-in9.31 kg-cm0.9 N-m | 6.0V 0.62 s/60°96.8 deg/s16.1 RPM | (add) | 2.30 oz65.2 g | 1.56×0.88×1.69 in 39.6×22.4×42.9 mm | — | Standard | (add) | (add) | (add) | Plastic | 25 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S136G * | Hobby |
6.0V 76.3 oz-in5.49 kg-cm0.5 N-m 4.8V 60.1 oz-in4.33 kg-cm0.4 N-m |
6.0V 0.50 s/60°120.0 deg/s20.0 RPM 4.8V 0.60 s/60°100.0 deg/s16.7 RPM |
(add) | 1.48 oz42.0 g | 1.81×0.91×0.98 in 46.0×23.1×24.9 mm | — | Low Profile | Plastic | 3-pole | (add) | Plastic | 21 | Dual Bearings | Analog | Bidirectional | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4–6 V | (add) | (add) | (add) | Water Resistant | (add) | Futaba J | 300 mm11.81 in | (add) | 0.19–0.28 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Futaba | S148 * | Hobby |
6.0V 41.6 oz-in3.00 kg-cm0.3 N-m 4.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
6.0V 0.22 s/60°272.7 deg/s45.5 RPM 4.8V 0.28 s/60°214.3 deg/s35.7 RPM |
(add) | 1.60 oz45.4 g | 1.60×0.80×1.41 in 40.6×20.3×35.8 mm | — | Standard | Plastic | 3-pole | (add) | Nylon | Plastic | 25 | Bushing | Analog | Clockwise | 180° | (add) | 20 ms | 550–2330 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | 270 mm10.63 in | (add) | 0.22–0.35 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Futaba | S3001 * | Hobby |
6.0V 57.0 oz-in4.10 kg-cm0.4 N-m 4.8V 44.0 oz-in3.17 kg-cm0.3 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.59 oz45.0 g | 1.60×0.80×1.42 in 40.6×20.3×36.1 mm | — | Standard | Plastic | 3-pole | (add) | Nylon | 25 | Single Bearing | Analog | Counterclockwise | 90° | 360 | 20 ms | (add) | 1520 µs | (add) | (add) | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | (add) | (add) | Futaba J | 300 mm11.81 in | (add) | 0.35–0.55 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.007 A7 mA | — | 3-5V | ||
| Futaba | S3002 * | Hobby |
6.0V 46.0 oz-in3.31 kg-cm0.3 N-m 4.8V 37.0 oz-in2.66 kg-cm0.3 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 1.23 oz35.0 g | 1.22×0.63×1.18 in 31.0×16.0×30.0 mm | — | Mini | (add) | 3-pole | (add) | Metal | 21 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 0.27–0.43 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| Futaba | S3003 * | Hobby |
6.0V 57.0 oz-in4.10 kg-cm0.4 N-m 4.8V 44.0 oz-in3.17 kg-cm0.3 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
0.43–0.5 A430–500 mA | 1.31 oz37.0 g | 1.57×0.79×1.42 in 39.9×20.1×36.1 mm | — | Standard | Plastic | 3-pole | H-Bridge | Plastic | 25 | Bushing | Analog | Counterclockwise | 120° | 180 | 30 ms | 500–3000 µs | 1520 µs | (add) | 50 Hz | Potentiometer | PWM | No | 4.8–6 V | Direct | Direct | -20–60°C-4.0–140.0°F | Not Rated | (add) | Futaba J | 300 mm11.81 in | Japan | 0.35–0.55 W | — | 5.8 mm | — | — | — | — | — | — | Position | 0.105 A @ 4.8V105 mA @ 4.8V | Positional | 0.008 A8 mA | — | 3-5V | ||
| Futaba | S3004 * | Hobby |
6.0V 57.0 oz-in4.10 kg-cm0.4 N-m 4.8V 44.0 oz-in3.17 kg-cm0.3 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.32 oz37.5 g | 1.57×0.79×1.42 in 39.9×20.1×36.1 mm | — | Standard | (add) | 3-pole | (add) | Plastic | 25 | Single Bearing | Analog | (add) | 180° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | No | 4.8–6 V | Direct | Direct | (add) | (add) | (add) | Futaba J | 125 mm4.92 in | (add) | 0.35–0.55 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.008 A8 mA | — | — | ||
| Futaba | S3010 * | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 72.0 oz-in5.18 kg-cm0.5 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 1.45 oz41.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | 3-pole | (add) | Plastic | 25 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 50 Hz | (add) | PWM | (add) | 4.8–6 V | Direct | Direct | (add) | (add) | (add) | Futaba J | 300 mm11.81 in | (add) | 0.67–1.04 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Futaba | S3014 * | Hobby | 6.0V 90.0 oz-in6.48 kg-cm0.6 N-m | 6.0V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 1.45 oz41.1 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.04 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S3016 * | Hobby |
6.0V 58.3 oz-in4.20 kg-cm0.4 N-m 4.8V 47.0 oz-in3.38 kg-cm0.3 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 1.20 oz34.0 g | 1.22×0.63×1.21 in 31.0×16.0×30.7 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 0.35–0.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S3050 * | Hobby |
6.0V 90.0 oz-in6.48 kg-cm0.6 N-m 4.8V 72.0 oz-in5.18 kg-cm0.5 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 1.73 oz49.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | 3-pole | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 0.67–1.04 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.008 A8 mA | — | — | ||
| Futaba | S3051 * | Hobby | 6.0V 132.0 oz-in9.51 kg-cm0.9 N-m | 6.0V 0.21 s/60°285.7 deg/s47.6 RPM | (add) | 1.73 oz49.0 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Futaba
Stall Current: (add)
Shaft Power: 1.56–1.78 W
Weight: 1.66 oz47.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 2.05–2.57 W
Weight: 1.62 oz45.9 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.79×1.00 in 40.4×20.1×25.4 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 2.73–3.92 W
Weight: 2.20 oz62.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.80×1.40 in 40.6×20.3×35.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.30 W
Weight: 0.38 oz10.8 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.78 in 23.6×8.1×19.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.69–2.57 W
Weight: 1.52 oz43.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.79×1.00 in 40.5×20.0×25.4 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 3.21–3.94 W
Weight: 1.90 oz54.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.44 in 39.9×20.1×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 3.21–3.94 W
Weight: 1.90 oz54.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.44 in 39.9×20.1×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.36–0.55 W
Weight: 1.27 oz36.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.78×1.42 in 40.4×19.8×36.0 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 2 µs
Refresh Rate: 70 Hz
Angle Sensor: Potentiometer
Control System: PWM | SBUS2
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: (add)
Water Rating: None
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.50–0.63 W
Weight: 1.27 oz36.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.42 in 40.0×20.0×36.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.79–1.27 W
Weight: 1.64 oz46.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.50 in 40.0×20.0×38.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 920–2120 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.79–1.27 W
Weight: 1.64 oz46.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.50 in 40.0×20.0×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 60°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1220–1820 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.30–1.56 W
Weight: 1.38 oz39.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.4×20.1×38.1 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: SBUS2
Programmable: Yes
Op. Voltage: 6.6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.40 W
Weight: 0.22 oz6.2 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.40×0.80 in 22.9×10.2×20.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 21
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Micro
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: —
Weight: 2.30 oz65.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.56×0.88×1.69 in 39.6×22.4×42.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.19–0.28 W
Weight: 1.48 oz42.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.81×0.91×0.98 in 46.0×23.1×24.9 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 21
Rotation: Dual Bearings
Modulation: Analog
Direction: Bidirectional
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: Futaba J
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Futaba
Stall Current: (add)
Shaft Power: 0.22–0.35 W
Weight: 1.60 oz45.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.80×1.41 in 40.6×20.3×35.8 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Nylon | Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: Clockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 550–2330 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 270 mm10.63 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Futaba
Stall Current: (add)
Shaft Power: 0.35–0.55 W
Weight: 1.59 oz45.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.80×1.42 in 40.6×20.3×36.1 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: Counterclockwise
Op. Range: 90°
Mech. Limit: 360
Pulse Cycle: 20 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.27–0.43 W
Weight: 1.23 oz35.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.22×0.63×1.18 in 31.0×16.0×30.0 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 21
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Futaba
Stall Current: 0.43–0.5 A430–500 mA
Shaft Power: 0.35–0.55 W
Weight: 1.31 oz37.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.42 in 39.9×20.1×36.1 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: H-Bridge
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Bushing
Modulation: Analog
Direction: Counterclockwise
Op. Range: 120°
Mech. Limit: 180
Pulse Cycle: 30 ms
Pulse Width: 500–3000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: Not Rated
Certification: (add)
Connector: Futaba J
Wire Length: 300 mm11.81 in
Country of Origin: Japan
Shape: —
Shaft Size: 5.8 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Futaba
Stall Current: (add)
Shaft Power: 0.35–0.55 W
Weight: 1.32 oz37.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.42 in 39.9×20.1×36.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: No
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 125 mm4.92 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.67–1.04 W
Weight: 1.45 oz41.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: Direct
Regulator Type: Direct
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.04 W
Weight: 1.45 oz41.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.35–0.54 W
Weight: 1.20 oz34.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.22×0.63×1.21 in 31.0×16.0×30.7 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.67–1.04 W
Weight: 1.73 oz49.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.16 W
Weight: 1.73 oz49.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.