Discover XQ-Power Servos in Our eBay Store!

Shop Now
Futaba S3001
Standard Discontinued

Futaba S3001

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-07
Identity
Brand Futaba
Product Number FUTM0029
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 57.00 oz-in
4.8V 44.00 oz-in
Speed
6.0V 0.19 sec/60°
4.8V 0.23 sec/60°
Running Current (add)
Stall Current (add)
Shaft Power 0.35–0.55 W
Physical
Weight 1.59 oz
Dimensions L 1.60 in
W 0.80 in
H 1.42 in
Case Material Plastic
Drivetrain
Motor Type 3-pole
Motor Drive (add)
Gears Nylon
Gear Spline/Teeth 25 T estimate
Rotation Mode Positional
Rotation/Support Single Bearing
Backlash (add)
Control & Signal
Modulation Analog
Direction Counterclockwise
Rotational Range 90°
Mechanical Limit 360°
Pulse Cycle 20 ms
Pulse Width (add)
Neutral Position 1520 µs
Dead Band (add)
Refresh Rate (add)
Angle Sensor Potentiometer
Control System PWM
Programmable (add)
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage (add)
Power Source Direct
Regulator Type Direct
Temperature -20–60 °C
Water Rating (add)
Certification (add)
Idle Current 0.007 A
Connectivity
Connector (add)
Wire Length 300 mm
Origin
Country of Origin (add)

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Similar Active Servos

Reviews (3)

  • eduardo bonomo

    May 22, 2020

    Application(s): todos los mandos

    Comments: no se mueve

  • Max

    November 24, 2019

    Application(s): Helicopters

    Comments: a very reliable Servo

  • Duckby

    January 4, 2012

    Application(s): Cap 69" span 120os Throttle

    Comments: Good servo for vibration but lack power good on throttle but can get sloppy so keep your eye on them

Submit a review of Futaba S3001