Discover XQ-Power Servos in Our eBay Store!
Shop NowFutaba Servos (211)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Futaba | HPS-A702 * | Hobby |
7.4V 1,027.7 oz-in74.00 kg-cm7.3 N-m 6.6V 944.4 oz-in68.00 kg-cm6.7 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.6V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.89 oz82.0 g | 1.59×0.83×1.55 in 40.4×21.1×39.4 mm | — | Standard | Aluminum | Brushless | (add) | Hybrid | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 13.43–15.84 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-A703 | Hobby |
7.4V 916.6 oz-in66.00 kg-cm6.5 N-m 6.6V 847.2 oz-in61.00 kg-cm6.0 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.6V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.89 oz82.0 g | 1.59×0.83×1.55 in 40.4×21.1×39.4 mm | — | Standard | Aluminum | Brushless | (add) | Hybrid | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 12.05–14.12 W | — | 6.0 mm | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Futaba | HPS-A704 | Hobby |
7.4V 194.4 oz-in14.00 kg-cm1.4 N-m 6.6V 173.6 oz-in12.50 kg-cm1.2 N-m |
7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.6V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 1.69 oz48.0 g | 1.59×0.83×1.06 in 40.4×21.1×26.9 mm | — | Low Profile | Plastic | Brushless | (add) | Hybrid | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 4.59–5.99 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-AA702 | Hobby |
7.4V 569.4 oz-in41.00 kg-cm4.0 N-m 6.6V 513.9 oz-in37.00 kg-cm3.6 N-m |
7.4V 0.08 s/60°800.0 deg/s133.3 RPM 6.6V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.82 oz80.0 g | 1.59×0.83×1.55 in 40.4×21.1×39.4 mm | — | Standard | Aluminum | Brushless | (add) | Hybrid | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | Water Resistant | (add) | (add) | (add) | Japan | 11.88–14.04 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-CB500 | Hobby |
7.4V 354.1 oz-in25.50 kg-cm2.5 N-m 6.0V 286.1 oz-in20.60 kg-cm2.0 N-m |
7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 2.01 oz57.0 g | 1.59×0.83×1.37 in 40.4×21.1×34.8 mm | — | Standard | Plastic | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | DC | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 7.56–10.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-CB701 | Hobby |
7.4V 680.5 oz-in49.00 kg-cm4.8 N-m 6.0V 583.3 oz-in42.00 kg-cm4.1 N-m |
7.4V 0.08 s/60°800.0 deg/s133.3 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.65 oz75.0 g | 1.59×0.83×1.49 in 40.4×21.1×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | Splashproof | (add) | (add) | (add) | Japan | 11.98–16.78 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Futaba | HPS-CD700 | Hobby |
7.4V 236.1 oz-in17.00 kg-cm1.7 N-m 6.0V 194.4 oz-in14.00 kg-cm1.4 N-m |
7.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 6.0V 0.06 s/60°1,090.9 deg/s181.8 RPM |
(add) | 1.87 oz53.0 g | 1.59×0.83×1.03 in 40.5×21.0×26.2 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 6.54–9.70 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-CT501 | Hobby |
7.4V 291.7 oz-in21.00 kg-cm2.1 N-m 6.0V 237.5 oz-in17.10 kg-cm1.7 N-m |
7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 1.55 oz44.0 g | 1.59×0.83×1.06 in 40.4×21.1×26.9 mm | — | Low Profile | Plastic | Brushless | (add) | Metal | 25 | (add) | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | (add) | (add) | Potentiometer | PWM | SBUS | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 6.27–8.99 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Futaba | HPS-CT701 | Hobby |
7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.90 oz54.0 g | 1.59×0.83×1.03 in 40.4×21.1×26.2 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | SBUS | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | Splashproof | (add) | (add) | (add) | Japan | 7.38–11.00 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-CT702 | Hobby |
7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 319.4 oz-in23.00 kg-cm2.3 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.87 oz53.0 g | 1.59×0.83×1.03 in 40.5×21.0×26.2 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Taiwan | 7.38–11.00 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-H700 | Hobby |
7.4V 611.1 oz-in44.00 kg-cm4.3 N-m 6.6V 569.4 oz-in41.00 kg-cm4.0 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.6V 0.08 s/60°800.0 deg/s133.3 RPM |
(add) | 2.68 oz76.0 g | 1.59×0.83×1.49 in 40.4×21.1×37.8 mm | — | Standard | Aluminum | Brushless | (add) | (add) | 25 | (add) | (add) | (add) | (add) | (add) | (add) | 760–1520 µs | 1520 µs | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | 2S Li-Po | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 14.04–16.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-HC700 | Hobby |
7.4V 277.8 oz-in20.00 kg-cm2.0 N-m 6.6V 250.0 oz-in18.00 kg-cm1.8 N-m |
7.4V 0.08 s/60°800.0 deg/s133.3 RPM 6.6V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.57 oz73.0 g | 1.59×0.83×1.49 in 40.4×21.1×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 760–1520 µs | 1520 µs | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 5.78–6.85 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-HC701 | Hobby |
7.4V 375.0 oz-in27.00 kg-cm2.6 N-m 6.6V 333.3 oz-in24.00 kg-cm2.4 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.6V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.90 oz54.0 g | 1.59×0.83×1.03 in 40.4×21.1×26.2 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 760–1520 µs | 760 µs | (add) | (add) | (add) | SBUS | SBUS2 | Yes | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Taiwan | 7.70–9.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | HPS-HT700 | Hobby |
7.4V 133.3 oz-in9.60 kg-cm0.9 N-m 6.6V 119.4 oz-in8.60 kg-cm0.8 N-m |
7.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 6.6V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 1.90 oz54.0 g | 1.59×0.83×1.03 in 40.4×21.1×26.2 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | 25 | (add) | (add) | (add) | (add) | (add) | (add) | 760–1520 µs | (add) | (add) | (add) | (add) | SBUS2 | Yes | 4.8–8.4 V | 2S LiPo | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 4.42–5.48 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | PS-10 | Hobby | 4.8V 16.7 oz-in1.20 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.32 oz9.0 g | 0.85×0.45×1.04 in 21.5×11.5×26.5 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 0.31 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | PS-14 | Hobby | 6.0V 27.8 oz-in2.00 kg-cm0.2 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.35 oz10.0 g | 0.91×0.47×1.08 in 23.0×12.0×27.3 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | RS204MD | Robotics | 4.8V 29.2 oz-in2.10 kg-cm0.2 N-m | 4.8V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 0.42 oz12.0 g | 1.10×0.63×0.94 in 27.9×16.0×23.9 mm | (add) | Mini | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 300° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | TTL | (add) | 3.7–6 V | (add) | (add) | (add) | (add) | (add) | ADH | (add) | Japan | 0.28 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| Futaba | RS301CR-F1 * | Hobby | 7.4V 98.6 oz-in7.10 kg-cm0.7 N-m | 7.4V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 0.99 oz28.0 g | 1.41×0.77×0.98 in 35.8×19.6×24.9 mm | — | Low Profile | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 300° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.66 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 7.4V150 mA @ 7.4V | (add) | (add) | — | — | ||
| Futaba | RS301CR-F2 * | Hobby | 7.4V 98.6 oz-in7.10 kg-cm0.7 N-m | 7.4V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 0.99 oz28.0 g | 1.41×0.77×0.98 in 35.8×19.6×24.9 mm | — | Low Profile | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.66 W | — | (add) | — | — | — | — | — | — | — | 0.150 A @ 7.4V150 mA @ 7.4V | (add) | (add) | — | — | ||
| Futaba | RS302CD-F1 * | Hobby | 7.4V 69.4 oz-in5.00 kg-cm0.5 N-m | 7.4V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.74 oz21.0 g | 1.45×0.77×0.98 in 36.8×19.6×24.9 mm | — | Low Profile | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.80 W | — | (add) | — | — | — | — | — | — | — | 0.125 A @ 7.4V125 mA @ 7.4V | (add) | (add) | — | — | ||
| Futaba | RS302CD-F2 * | Hobby | 7.4V 69.4 oz-in5.00 kg-cm0.5 N-m | 7.4V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.74 oz21.0 g | 1.45×0.77×0.98 in 36.8×19.6×24.9 mm | — | Low Profile | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.80 W | — | (add) | — | — | — | — | — | — | — | 0.125 A @ 7.4V125 mA @ 7.4V | (add) | (add) | — | — | ||
| Futaba | RS303MR | Robotics | 7.4V 90.3 oz-in6.50 kg-cm0.6 N-m | 7.4V 0.11 s/60°545.5 deg/s90.9 RPM | (add) | 0.99 oz28.0 g | 1.41×0.78×0.98 in 35.8×19.8×24.9 mm | (add) | Low Profile | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | (add) | Bidirectional | 300° | (add) | (add) | 560–2480 µs | 1520 µs | (add) | (add) | (add) | TTL / PWM | Yes | 4.8–7.4 V | (add) | (add) | ≤40°C≤104.0°F | (add) | (add) | Futaba J | 300 mm11.81 in | Japan | 1.52 W | Boxed | (add) | (add) | (add) | 230.4 Kbps | (add) | (add) | (add) | (add) | 0.090 A @ 7.4V90 mA @ 7.4V | Positional | 0.016 A16 mA | (add) | (add) | ||
| Futaba | RS403PR * | Hobby | 6.0V 196.0 oz-in14.11 kg-cm1.4 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 2.22 oz63.0 g | 1.57×0.79×1.48 in 39.9×20.1×37.6 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | (add) | 14.25 ms | 920–2120 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 2.79 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | RS404PD * | Hobby | 6.0V 124.0 oz-in8.93 kg-cm0.9 N-m | 6.0V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 1.68 oz47.5 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | (add) | 3-pole | (add) | Metal | 25 | (add) | Digital | (add) | 150° | (add) | 14.25 ms | 920–2120 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 1.15 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Futaba | S-A300 | Hobby |
7.4V 152.8 oz-in11.00 kg-cm1.1 N-m 6.0V 138.9 oz-in10.00 kg-cm1.0 N-m |
7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 1.66 oz47.1 g | 1.57×0.79×1.50 in 39.9×20.1×38.1 mm | — | Standard | Plastic | Coreless | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | SBUS2 | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 1.35–1.66 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Futaba
Stall Current: (add)
Shaft Power: 13.43–15.84 W
Weight: 2.89 oz82.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.55 in 40.4×21.1×39.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 12.05–14.12 W
Weight: 2.89 oz82.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.55 in 40.4×21.1×39.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: 6.0 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 4.59–5.99 W
Weight: 1.69 oz48.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.06 in 40.4×21.1×26.9 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 11.88–14.04 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.55 in 40.4×21.1×39.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 7.56–10.91 W
Weight: 2.01 oz57.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.37 in 40.4×21.1×34.8 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: DC
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 11.98–16.78 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.49 in 40.4×21.1×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Splashproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 6.54–9.70 W
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.03 in 40.5×21.0×26.2 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS | SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 6.27–8.99 W
Weight: 1.55 oz44.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.06 in 40.4×21.1×26.9 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM | SBUS | SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 7.38–11.00 W
Weight: 1.90 oz54.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.03 in 40.4×21.1×26.2 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM | SBUS | SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Splashproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 7.38–11.00 W
Weight: 1.87 oz53.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.03 in 40.5×21.0×26.2 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Taiwan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 14.04–16.14 W
Weight: 2.68 oz76.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.49 in 40.4×21.1×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 760–1520 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: 2S Li-Po
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 5.78–6.85 W
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.49 in 40.4×21.1×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 760–1520 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 7.70–9.91 W
Weight: 1.90 oz54.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.03 in 40.4×21.1×26.2 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 760–1520 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS | SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Taiwan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 4.42–5.48 W
Weight: 1.90 oz54.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.03 in 40.4×21.1×26.2 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 760–1520 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: SBUS2
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.31 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.85×0.45×1.04 in 21.5×11.5×26.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: —
Weight: 0.35 oz10.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.28 W
Weight: 0.42 oz12.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.10×0.63×0.94 in 27.9×16.0×23.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: 300°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: TTL
Programmable: (add)
Op. Voltage: 3.7–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: ADH
Wire Length: (add)
Country of Origin: Japan
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.66 W
Weight: 0.99 oz28.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.41×0.77×0.98 in 35.8×19.6×24.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 300°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.66 W
Weight: 0.99 oz28.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.41×0.77×0.98 in 35.8×19.6×24.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.80 W
Weight: 0.74 oz21.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.45×0.77×0.98 in 36.8×19.6×24.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 0.80 W
Weight: 0.74 oz21.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.45×0.77×0.98 in 36.8×19.6×24.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.52 W
Weight: 0.99 oz28.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.41×0.78×0.98 in 35.8×19.8×24.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: Bidirectional
Op. Range: 300°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 560–2480 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: TTL / PWM
Programmable: Yes
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤40°C≤104.0°F
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 300 mm11.81 in
Country of Origin: Japan
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: 230.4 Kbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 2.79 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.48 in 39.9×20.1×37.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 14.25 ms
Pulse Width: 920–2120 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.15 W
Weight: 1.68 oz47.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 150°
Mech. Limit: (add)
Pulse Cycle: 14.25 ms
Pulse Width: 920–2120 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Futaba
Stall Current: (add)
Shaft Power: 1.35–1.66 W
Weight: 1.66 oz47.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.50 in 39.9×20.1×38.1 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM | SBUS2
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.