Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-09-03Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | FUTM0710 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
41.60 oz-in
3.00 kg-cm
0.3 N-m
4.8V
33.30 oz-in
2.40 kg-cm
0.2 N-m
|
| Speed |
6.0V
0.22 sec/60°
272.7 deg/s
45.5 RPM
4.8V
0.28 sec/60°
214.3 deg/s
35.7 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.22–0.35 W |
| Physical | |
| Weight | 1.60 oz45.4 g |
| Dimensions |
L 1.60 in W 0.80 in H 1.41 in L 40.6 mm W 20.3 mm H 35.8 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | 3-pole |
| Motor Drive | (add) |
| Gears | Nylon | Plastic |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Bushing |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | Clockwise |
| Rotational Range | 180° |
| Mechanical Limit | (add) |
| Pulse Cycle | 20 ms |
| Pulse Width | 550-2330 µs |
| Neutral Position | 1500 µs |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | Futaba J |
| Wire Length | 270 mm10.63 in |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (8)
-
MINI
February 9, 2026Application(s):
Comments: nice
Marky
October 25, 2023Application(s): Just about to replace one of these in my vintage RC car. A Mardave meteor I built with my uncle in about 1989-1990. Servo still works but it's got a little sloppy
Comments: It was a great servo in its day (the early 90s), now it's just an old servo that still works well enough to steer my car round a track after 30 yrs. I hope futabas new stuff lasts this long.
Marky
October 25, 2023Application(s): Just about to replace one of these in my vintage RC car. A Mardave meteor I built with my uncle in about 1989-1990. Servo still works but it's got a little sloppy
Comments: It was a great servo in its day (the early 90s), now it's just an old servo that still works well enough to steer my car round a track after 30 yrs. I hope futabas new stuff lasts this long.
RULOGALD
March 8, 2019Application(s): SPORT RC PLANES WITH .46-.60 GLOW ENGINE
Comments: I HAVE USED THEM FOR MORE THAN TEN YEARS .RELIABLE LOW COST SERVO
Boomer
April 7, 2017Application(s): Rudder servo on Yamaha Round the World RC Yacht 1 meter boat
Comments: This servo has performed perfectly for over ten years. Using a Futaba S3801 for the sail servo. Same report- could not ask for better performance
Biomecanoid
February 19, 2017Application(s): Steering Servo
Comments: I had this servo on my Kyosho Raider PRO, the car died due to lack of spare parts but the 2 Futaba servos on the steering and mechanical speed control live on. A bit short of 30 years old and still fully functional
Spin2
May 20, 2016Application(s): Airplane
Comments: Older servo, but continues to perform -- no problems
lugerman
January 13, 2013Application(s): all airplane, heli throttle
Comments: super servo of its time still using some. I thing this was one of the last hand assembled servos Futaba made