Discover XQ-Power Servos in Our eBay Store!

Shop Now
Futaba S3050
Standard Discontinued

Futaba S3050

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-07-28
Identity
Brand Futaba
Product Number FUTM0300
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 90.00 oz-in
4.8V 72.00 oz-in
Speed
6.0V 0.16 sec/60°
4.8V 0.20 sec/60°
Running Current (add)
Stall Current (add)
Shaft Power 0.67–1.04 W
Physical
Weight 1.73 oz
Dimensions L 1.57 in
W 0.79 in
H 1.50 in
Case Material (add)
Drivetrain
Motor Type 3-pole
Motor Drive (add)
Gears Metal
Gear Spline/Teeth 25 T estimate
Rotation Mode (add)
Rotation/Support Dual Bearings
Backlash (add)
Control & Signal
Modulation Digital
Direction (add)
Rotational Range (add)
Mechanical Limit (add)
Pulse Cycle (add)
Pulse Width (add)
Neutral Position (add)
Dead Band (add)
Refresh Rate (add)
Angle Sensor (add)
Control System (add)
Programmable (add)
Signal Voltage (add)
Electrical & Environment
Operating Voltage (add)
Power Source (add)
Regulator Type (add)
Temperature (add)
Water Rating (add)
Certification (add)
Idle Current (add)
Connectivity
Connector (add)
Wire Length (add)
Origin
Country of Origin (add)

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Similar Active Servos

Reviews (3)

  • Marco Aurélio

    May 29, 2014

    Application(s): R/C Car

    Comments: In my Traxxas Slayer they work like a Traxxas 2075 servo in 9.0Kg of tork, when my 2075 just stop to work i use a stock 2052 but the work so slow, and i put that S3050 and this 6.5kg work like a Traxxas 2075 in 9.0 tork??? To me is perfect, the negative is no waterproof. Excelent option.

  • AlvaroSpain1971

    October 5, 2012

    Application(s): Ciclic servo for Venture CP30 Heli

    Comments: Been using these servos to power the ciclic of my JR VEnture CP230 Heli. Really happy with their performance and reliability.
    I only give a four because I found that they had a little too much slope at the Ball Bearing after not many flights (Mild 3D).
    Anyway, I bought another three today to install in a Thunder Tiger X-50

  • Gavin

    August 12, 2010

    Application(s): I use them on ailerons and rudder on a 35 lb elecric powered scale model. They work hard!

    Comments: Good performance, at a reasonable price. Excellent resolution and centering. Futaba reliability gives peace of mind when used in this large and expensive model. A very nice general purpose digital servo.

Submit a review of Futaba S3050