Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| PTK | 9180SSG | Hobby |
28.0V 2,513.6 oz-in181.00 kg-cm17.7 N-m 24.0V 2,221.9 oz-in160.00 kg-cm15.7 N-m |
28.0V 0.16 s/60°375.0 deg/s62.5 RPM 24.0V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 14.29 oz405.0 g | 2.52×1.24×2.92 in 64.0×31.5×74.2 mm | — | Giant | (add) | Brushless | (add) | Steel | 25 | 5 | Digital | (add) | 50° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 22.82–29.05 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| PTK | 9732MG-D | Hobby |
8.4V 902.7 oz-in65.00 kg-cm6.4 N-m 7.4V 805.5 oz-in58.00 kg-cm5.7 N-m 4.8V 583.3 oz-in42.00 kg-cm4.1 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.82 oz80.0 g | 1.59×0.79×1.26 in 40.4×20.1×32.0 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 7.19–20.86 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| PTK | 9742MG-D | Hobby |
16.8V 1,180.4 oz-in85.00 kg-cm8.3 N-m 12.8V 1,041.5 oz-in75.00 kg-cm7.4 N-m 10.4V 902.7 oz-in65.00 kg-cm6.4 N-m 8.4V 763.8 oz-in55.00 kg-cm5.4 N-m |
16.8V 0.07 s/60°857.1 deg/s142.9 RPM 12.8V 0.09 s/60°666.7 deg/s111.1 RPM 10.4V 0.11 s/60°545.5 deg/s90.9 RPM 8.4V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.82 oz80.0 g | 1.59×0.79×1.26 in 40.4×20.1×32.0 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 10.86–31.18 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| PTK | 9752TG-D | Hobby |
8.4V 347.2 oz-in25.00 kg-cm2.5 N-m 7.4V 305.5 oz-in22.00 kg-cm2.2 N-m 6.0V 250.0 oz-in18.00 kg-cm1.8 N-m 5.0V 208.3 oz-in15.00 kg-cm1.5 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 5.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.12 oz60.2 g | 1.66×0.79×1.06 in 42.2×20.1×26.9 mm | — | Low Profile | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.28–12.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| PTK | 9835MG-D | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 7.4V 402.7 oz-in29.00 kg-cm2.8 N-m 6.0V 368.0 oz-in26.50 kg-cm2.6 N-m 5.0V 333.3 oz-in24.00 kg-cm2.4 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.68 oz76.0 g | 1.59×0.79×1.43 in 40.4×20.1×36.3 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.14–11.23 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| PTK | 9840MG-D | Hobby |
8.4V 486.1 oz-in35.00 kg-cm3.4 N-m 7.4V 416.6 oz-in30.00 kg-cm2.9 N-m 6.0V 361.1 oz-in26.00 kg-cm2.5 N-m 5.0V 312.5 oz-in22.50 kg-cm2.2 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 5.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.47 oz70.0 g | 1.59×0.79×1.43 in 40.4×20.1×36.3 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.85–8.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| PTK | 9860MG-D | Hobby |
8.4V 930.4 oz-in67.00 kg-cm6.6 N-m 7.4V 777.7 oz-in56.00 kg-cm5.5 N-m 6.0V 611.0 oz-in44.00 kg-cm4.3 N-m 4.8V 486.1 oz-in35.00 kg-cm3.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.96 oz84.0 g | 1.57×0.79×1.59 in 39.9×20.1×40.4 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | (add) | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.99–15.64 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | BL7146HV | Hobby |
7.4V 638.8 oz-in46.00 kg-cm4.5 N-m 6.0V 536.1 oz-in38.60 kg-cm3.8 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.50 oz71.0 g | 1.59×0.81×1.42 in 40.4×20.6×36.1 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 8.26–11.81 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | BLS7032HV | Hobby |
8.4V 451.5 oz-in32.51 kg-cm3.2 N-m 6.0V 365.2 oz-in26.30 kg-cm2.6 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.47 oz70.1 g | 1.59×0.81×1.42 in 40.4×20.6×36.1 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 7.50–11.93 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | CLS6322HV | Hobby |
7.4V 292.5 oz-in21.06 kg-cm2.1 N-m 6.0V 239.0 oz-in17.21 kg-cm1.7 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.22 oz63.0 g | 1.59×0.81×1.57 in 40.4×20.6×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 500–2500 µs | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 4.91–7.73 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | CLS6336HV | Hobby |
7.4V 494.4 oz-in35.60 kg-cm3.5 N-m 6.0V 386.1 oz-in27.80 kg-cm2.7 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.22 oz63.0 g | 1.59×0.81×1.57 in 40.4×20.6×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 5.10–8.31 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | CLS7346HV | Hobby |
7.4V 651.3 oz-in46.90 kg-cm4.6 N-m 6.0V 520.8 oz-in37.50 kg-cm3.7 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.57 oz73.0 g | 1.59×0.81×1.42 in 40.4×20.6×36.1 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 6.88–10.04 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DC6215MG | Hobby |
6.6V 208.3 oz-in15.00 kg-cm1.5 N-m 4.8V 148.6 oz-in10.70 kg-cm1.0 N-m |
6.6V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 2.29–3.85 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS2060HV | Hobby |
7.4V 861.0 oz-in62.00 kg-cm6.1 N-m 6.0V 666.6 oz-in48.00 kg-cm4.7 N-m |
7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 7.05 oz200.0 g | 2.59×1.18×2.26 in 65.8×30.0×57.4 mm | — | Giant | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | 1520 µs | 4 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 8.22–12.25 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS5932HV | Hobby |
8.4V 448.6 oz-in32.30 kg-cm3.2 N-m 6.0V 350.0 oz-in25.20 kg-cm2.5 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.09 oz59.3 g | 1.59×0.81×1.44 in 40.4×20.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 5.39–8.29 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS6114MG | Hobby |
6.0V 192.1 oz-in13.83 kg-cm1.4 N-m 4.8V 160.1 oz-in11.53 kg-cm1.1 N-m |
6.0V 0.10 s/60°582.5 deg/s97.1 RPM 4.8V 0.13 s/60°480.0 deg/s80.0 RPM |
(add) | 2.15 oz61.0 g | 1.59×0.81×1.44 in 40.4×20.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | (add) | 2.37–3.45 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS6208MG | Hobby |
6.0V 113.9 oz-in8.20 kg-cm0.8 N-m 4.8V 94.4 oz-in6.80 kg-cm0.7 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.96 oz55.6 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 1.94–3.01 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS6209MG | Hobby |
6.0V 129.9 oz-in9.35 kg-cm0.9 N-m 4.8V 120.1 oz-in8.65 kg-cm0.8 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.80×1.50 in 40.4×20.3×38.1 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 1.48–1.85 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS6221MG | Hobby |
6.0V 282.2 oz-in20.32 kg-cm2.0 N-m 4.8V 239.6 oz-in17.25 kg-cm1.7 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 2.46–3.26 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | DS6225MG | Hobby |
6.0V 351.4 oz-in25.30 kg-cm2.5 N-m 4.8V 276.4 oz-in19.90 kg-cm2.0 N-m |
6.0V 0.21 s/60°285.7 deg/s47.6 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 300° | (add) | (add) | 800–2200 µs | 1520 µs | 4 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 2.04–3.09 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | MG995 | Hobby |
6.0V 208.3 oz-in15.00 kg-cm1.5 N-m 4.8V 180.5 oz-in13.00 kg-cm1.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.79 oz79.0 g | 1.57×0.75×1.69 in 39.9×19.0×42.9 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 1.96–2.96 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Racerstar | PS5520MG | Hobby |
6.0V 282.2 oz-in20.32 kg-cm2.0 N-m 4.8V 239.6 oz-in17.25 kg-cm1.7 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 120° | (add) | (add) | (add) | 1520 µs | 7 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 2.46–3.26 W | Boxed | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Raiden | DMP-160 * | Hobby | 6.0V 222.2 oz-in16.00 kg-cm1.6 N-m | 6.0V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 2.15 oz61.0 g | 1.67×0.79×1.60 in 42.4×20.1×40.6 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Raiden | DPP-065 * | Hobby | 6.0V 222.2 oz-in16.00 kg-cm1.6 N-m | 6.0V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 2.15 oz61.0 g | 1.67×0.79×1.60 in 42.4×20.1×40.6 mm | — | Standard | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| RC4WD | Z-E0035 | Hobby |
7.2V 305.6 oz-in22.00 kg-cm2.2 N-m 6.0V 277.8 oz-in20.00 kg-cm2.0 N-m |
7.2V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.19 oz62.0 g | 1.57×0.78×1.59 in 39.9×19.8×40.4 mm | — | Standard | Aluminum | (add) | (add) | Metal | 25 | (add) | Digital | (add) | (add) | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | 320 mm12.60 in | USA | 3.21–4.04 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: PTK
Stall Current: (add)
Shaft Power: 22.82–29.05 W
Weight: 14.29 oz405.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.52×1.24×2.92 in 64.0×31.5×74.2 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 5
Modulation: Digital
Direction: (add)
Op. Range: 50°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: PTK
Stall Current: (add)
Shaft Power: 7.19–20.86 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.26 in 40.4×20.1×32.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: PTK
Stall Current: (add)
Shaft Power: 10.86–31.18 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.26 in 40.4×20.1×32.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: PTK
Stall Current: (add)
Shaft Power: 4.28–12.84 W
Weight: 2.12 oz60.2 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.66×0.79×1.06 in 42.2×20.1×26.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: PTK
Stall Current: (add)
Shaft Power: 5.14–11.23 W
Weight: 2.68 oz76.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.43 in 40.4×20.1×36.3 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: PTK
Stall Current: (add)
Shaft Power: 3.85–8.17 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.43 in 40.4×20.1×36.3 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: PTK
Stall Current: (add)
Shaft Power: 5.99–15.64 W
Weight: 2.96 oz84.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.59 in 39.9×20.1×40.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 8.26–11.81 W
Weight: 2.50 oz71.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.42 in 40.4×20.6×36.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 7.50–11.93 W
Weight: 2.47 oz70.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.42 in 40.4×20.6×36.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 4.91–7.73 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.57 in 40.4×20.6×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 5.10–8.31 W
Weight: 2.22 oz63.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.57 in 40.4×20.6×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 6.88–10.04 W
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.42 in 40.4×20.6×36.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 2.29–3.85 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 8.22–12.25 W
Weight: 7.05 oz200.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.59×1.18×2.26 in 65.8×30.0×57.4 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 5.39–8.29 W
Weight: 2.09 oz59.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.44 in 40.4×20.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 2.37–3.45 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.44 in 40.4×20.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 1.94–3.01 W
Weight: 1.96 oz55.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 1.48–1.85 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.50 in 40.4×20.3×38.1 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 2.46–3.26 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 2.04–3.09 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 300°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 1.96–2.96 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.75×1.69 in 39.9×19.0×42.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Racerstar
Stall Current: (add)
Shaft Power: 2.46–3.26 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 7 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Raiden
Stall Current: (add)
Shaft Power: 2.28 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.67×0.79×1.60 in 42.4×20.1×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Raiden
Stall Current: (add)
Shaft Power: 2.28 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.67×0.79×1.60 in 42.4×20.1×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: RC4WD
Stall Current: (add)
Shaft Power: 3.21–4.04 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.78×1.59 in 39.9×19.8×40.4 mm
Case Material: Aluminum
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: 320 mm12.60 in
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.