Discover XQ-Power Servos in Our eBay Store!

Shop Now
ProTek RC 100SS
Standard

ProTek RC 100SS

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-10
Identity
Brand ProTek RC
Product Number 253591
Category Hobby
Performance
Torque
6.0V 168.00 oz-in
4.8V 134.00 oz-in Below Average
Speed
6.0V 0.09 sec/60°
4.8V 0.11 sec/60° Above Average
Physical
Weight 1.94 ozAbove Average
Dimensions L 1.575 in
W 0.787 in
H 1.496 in
Case Material Aluminum
Drivetrain
Motor Type Cored
Gears Metal
Gear Spline/Teeth 25 T
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Pulse Cycle 333 ms
Neutral Position 1520 µs
Refresh Rate 333 Hz
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -10–60 °C
Connectivity
Connector JR (Universal) estimate
Wire Length 200 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 29% of 1041 Digital Standard servos at 4.8V
SpeedAbove Average
Faster than 68% of 1038 Digital Standard servos at 4.8V
WeightAbove Average
Lighter than 76% of 1903 Digital Standard servos

Performance Analysis

Shaft Power 2.25–3.45 W
Power Density1.861 W/in³
More power-dense than 41% of 1761 Digital Standard servos
Torque Density2.4408 oz-in/g
Stronger than 31% of 1034 Digital Standard servos
Torque-to-Volume Ratio72.26 oz-in/in³
Denser torque than 28% of 1040 Digital Standard servos
Speed-to-Weight0.16559 (1/sec·g)
Faster than 77% of 1030 Digital Standard servos
Speed-Torque Trade-off14.74
Better balanced than 25% of 1029 Digital Standard servos
Torque Gain per Volt21.14%/V
More voltage-responsive (torque) than 87% of 845 Digital Standard servos
Speed Gain per Volt18.52%/V
More voltage-responsive (speed) than 70% of 866 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 6% of 1540 Digital Standard servos

Notes

Requires a m3x10mm screw to attach the servo horn to the output shaft. Use of a shorter screw can cause failure and will void your warranty.

Similar Active Servos

Reviews of ProTek RC 100SS

Be the first to review!

Submit a review of ProTek RC 100SS