Discover XQ-Power Servos in Our eBay Store!

Shop Now
ProTek RC 100T
Standard

ProTek RC 100T

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-28
Identity
Brand ProTek RC
Product Number 228478
Category Hobby
Performance
Torque
6.0V 216.00 oz-in
4.8V 173.00 oz-in Average
Speed
6.0V 0.14 sec/60°
4.8V 0.17 sec/60° Below Average
Physical
Weight 1.94 ozAbove Average
Dimensions L 1.58 in
W 0.79 in
H 1.50 in
Case Material Aluminum
Drivetrain
Motor Type Cored
Gears Metal
Gear Spline/Teeth 25 T
Control & Signal
Modulation Digital
Pulse Cycle 333 ms
Neutral Position 1520 µs
Refresh Rate 333 Hz
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -10–60 °C
Connectivity
Connector JR (Universal) estimate
Wire Length 200 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAverage
Stronger than 42% of the 844 Digital Standard servos at 4.8V
SpeedBelow Average
Faster than 23% of the 832 Digital Standard servos at 4.8V
WeightAbove Average
Lighter than 76% of the 1818 Digital Standard servos

Performance Analysis

Shaft Power 1.88–2.85 W
Torque Density3.1512 oz-in/g
Stronger than 48% of the 833 Digital Standard servos in the database
Torque-to-Volume Ratio93.30 oz-in/in³
Denser torque than 42% of the 844 Digital Standard servos in the database
Power Density1.538 W/in³
More power-dense than 34% of the 1645 Digital Standard servos in the database
Speed-to-Weight0.10715 (1/sec·g)
Faster than 40% of the 822 Digital Standard servos in the database
Speed-Torque Trade-off29.41
Better balanced than 54% of the 827 Digital Standard servos in the database
Torque Gain per Volt20.71%/V
More voltage-responsive (torque) than 80% of the 674 Digital Standard servos in the database
Speed Gain per Volt17.88%/V
More voltage-responsive (speed) than 68% of the 688 Digital Standard servos in the database
Voltage Range Width1.2 V
Wider voltage range than 7% of the 1271 Digital Standard servos in the database

Notes

Requires a m3x10mm screw to attach the servo horn to the output shaft. Use of a shorter screw can cause failure and will void your warranty.

Similar Active Servos

Reviews of ProTek RC 100T

Be the first to review!

Submit a review of ProTek RC 100T