Discover XQ-Power Servos in Our eBay Store!

Shop Now
PTK 8850
Standard

PTK 8850

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-24
Identity
Brand PTK
Category Hobby
Performance
Torque
8.4V 583.25 oz-in
7.4V 527.71 oz-in
7.2V 416.61 oz-in
5.0V 361.06 oz-in Above Average
Speed
8.4V0.09 sec/60°
Physical
Weight 2.48 ozBelow Average
Dimensions L 1.57 in
W 0.79 in
H 1.45 in
Case Material Plastic
Drivetrain
Motor Type Brushless
Gears Stainless Steel
Gear Spline/Teeth 25 T estimate
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Rotational Range 180°
Pulse Cycle 3.003 ms
Pulse Width 500-2500 µs
Dead Band 2 µs
Refresh Rate 333 Hz
Angle Sensor Potentiometer
Control System PWM
Electrical & Environment
Operating Voltage 5–8.4 V
Water Rating Waterproof
Connectivity
Connector JR (Universal)
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 78% of 1060 Digital Standard servos at 5.0V
WeightBelow Average
Lighter than 33% of 1880 Digital Standard servos

Performance Analysis

Shaft Power 12.54 W
Power Density6.973 W/in³
More power-dense than 91% of 1768 Digital Standard servos
Torque Density5.1433 oz-in/g
Stronger than 80% of 1053 Digital Standard servos
Torque-to-Volume Ratio200.76 oz-in/in³
Denser torque than 82% of 1058 Digital Standard servos
Speed-to-Weight0.16564 (1/sec·g)
Speed-Torque Trade-off31.05
Torque Gain per Volt18.10%/V
More voltage-responsive (torque) than 70% of 873 Digital Standard servos
Voltage Range Width3.4 V
Wider voltage range than 71% of 1560 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0010
Finer dead band than 76% of 504 Digital Standard servos

Similar Active Servos

Reviews of PTK 8850

Be the first to review!

Submit a review of PTK 8850