Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Graupner | BS 9819 * | Hobby |
6.0V 383.7 oz-in27.63 kg-cm2.7 N-m 4.8V 320.0 oz-in23.04 kg-cm2.3 N-m |
6.0V 0.17 s/60°363.6 deg/s60.6 RPM 4.8V 0.20 s/60°307.7 deg/s51.3 RPM |
(add) | 2.29 oz65.0 g | 1.59×0.83×1.61 in 40.4×21.1×40.9 mm | — | Standard | (add) | Brushless | (add) | Metal | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.03–4.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 12021 * | Hobby |
6.0V 237.9 oz-in17.13 kg-cm1.7 N-m 4.8V 189.8 oz-in13.66 kg-cm1.3 N-m |
4.8V 0.23 s/60°260.9 deg/s43.5 RPM | (add) | 4.59 oz130.0 g | 2.48×1.26×2.402 in 63.0×32.0×61.0 mm | — | Giant | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | 0.600° | — | ||
| Graupner | C 4621 * | Hobby | 4.8V 114.0 oz-in8.21 kg-cm0.8 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 1.83 oz51.9 g | 1.535×0.75×1.575 in 39.0×19.0×40.0 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Analog | (add) | 90° | (add) | 16.67 ms | (add) | 1520 µs | (add) | 60 Hz | Potentiometer | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.51 W | — | (add) | — | — | — | — | — | — | — | 0.009 A @ 6.0V9 mA @ 6.0V | (add) | 0.009 A9 mA | — | — | ||
| Graupner | DES 707 BBMG | Hobby | 6.0V 191.7 oz-in13.80 kg-cm1.4 N-m | 6.0V 0.18 s/60°333.3 deg/s55.6 RPM | 1.61–1.95 A1610–1950 mA | 1.87 oz53.0 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | 3-pole | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.97 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | 0.008 A8 mA | — | — | ||
| Graupner | DES 708 BBMG | Hobby |
6.0V 145.9 oz-in10.50 kg-cm1.0 N-m 4.8V 122.2 oz-in8.80 kg-cm0.9 N-m |
6.0V 0.14 s/60°444.4 deg/s74.1 RPM 4.8V 0.17 s/60°363.6 deg/s60.6 RPM |
(add) | 1.87 oz53.0 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | 3-pole | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.37–2.00 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.008 A8 mA | — | — | ||
| Graupner | DES 718 BBMG | Hobby |
6.0V 148.7 oz-in10.71 kg-cm1.0 N-m 4.8V 124.6 oz-in8.97 kg-cm0.9 N-m |
6.0V 0.14 s/60°444.4 deg/s74.1 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.90 oz54.0 g | 1.575×0.768×1.535 in 40.0×19.5×39.0 mm | — | Standard | (add) | Brushed | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.36–2.04 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | 0.008 A8 mA | — | — | ||
| Graupner | DES 804P BB | Hobby |
6.0V 180.5 oz-in13.00 kg-cm1.3 N-m 4.8V 152.8 oz-in11.00 kg-cm1.1 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.78 oz50.5 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | Coreless | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.77–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 805P BB | Hobby |
6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 131.9 oz-in9.50 kg-cm0.9 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 1.78 oz50.5 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | Coreless | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.88–2.82 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 806 BBMG | Hobby |
6.0V 131.9 oz-in9.50 kg-cm0.9 N-m 4.8V 111.1 oz-in8.00 kg-cm0.8 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.85 oz52.5 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | 1500 µs | (add) | 333 Hz | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.28–1.88 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.008 A8 mA | — | — | ||
| Graupner | DES 806P BBMG | Hobby |
6.0V 180.5 oz-in13.00 kg-cm1.3 N-m 4.8V 152.8 oz-in11.00 kg-cm1.1 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.85 oz52.5 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | CORELESS | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.77–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 807 BBMG | Hobby |
6.0V 106.2 oz-in7.65 kg-cm0.8 N-m 4.8V 93.5 oz-in6.73 kg-cm0.7 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.85 oz52.5 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | 3 ms | (add) | 1500 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.44–2.18 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.008 A8 mA | — | — | ||
| Graupner | DES 807P BBMG | Hobby |
6.0V 152.8 oz-in11.00 kg-cm1.1 N-m 4.8V 131.9 oz-in9.50 kg-cm0.9 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.85 oz52.5 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.52–2.17 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DES 808 BBMG * | Hobby |
6.0V 59.5 oz-in4.28 kg-cm0.4 N-m 4.8V 49.6 oz-in3.57 kg-cm0.3 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.08 s/60°800.0 deg/s133.3 RPM |
(add) | 1.87 oz53.0 g | 1.57×0.77×1.57 in 39.9×19.6×39.9 mm | — | Standard | (add) | Coreless | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 1–16 µs | 1500 µs | (add) | 400 Hz | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.22–1.83 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.008 A8 mA | — | — | ||
| Graupner | DES 808P BBMG | Hobby |
6.0V 83.3 oz-in6.00 kg-cm0.6 N-m 4.8V 69.4 oz-in5.00 kg-cm0.5 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 1.80 oz51.0 g | 1.57×0.77×1.54 in 39.9×19.6×39.1 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.83–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 14021 * | Hobby | 6.0V 198.2 oz-in14.27 kg-cm1.4 N-m | 4.8V 0.21 s/60°285.7 deg/s47.6 RPM | (add) | 4.52 oz128.0 g | 2.48×1.26×2.402 in 63.0×32.0×61.0 mm | — | Large | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 5491 * | Hobby | 4.8V 70.8 oz-in5.10 kg-cm0.5 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 1.80 oz51.0 g | 1.54×0.75×1.46 in 39.1×19.0×37.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8311 * | Hobby |
6.0V 148.7 oz-in10.71 kg-cm1.1 N-m 4.8V 138.8 oz-in9.99 kg-cm1.0 N-m |
6.0V 0.20 s/60°307.7 deg/s51.3 RPM 4.8V 0.23 s/60°264.3 deg/s44.1 RPM |
(add) | 2.12 oz60.0 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.13–1.41 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8411 * | Hobby |
6.0V 162.9 oz-in11.73 kg-cm1.2 N-m 4.8V 128.2 oz-in9.23 kg-cm0.9 N-m |
6.0V 0.17 s/60°363.6 deg/s60.6 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.08 oz59.0 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | Coreless | MOS | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.19–1.83 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.015 A15 mA | — | — | ||
| Graupner | DS 8417 * | Hobby |
6.0V 85.0 oz-in6.12 kg-cm0.6 N-m 4.8V 69.4 oz-in5.00 kg-cm0.5 N-m |
4.8V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 1.98 oz56.1 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8418 * | Hobby | 6.0V 65.1 oz-in4.69 kg-cm0.5 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 1.98 oz56.0 g | 1.535×0.748×1.535 in 39.0×19.0×39.0 mm | — | Unknown | (add) | (add) | MOS | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 1–16 µs | (add) | (add) | (add) | (add) | (add) | Yes | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 180 mm7.09 in | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 0.016 A16 mA | — | — | ||
| Graupner | DS 8511 * | Hobby | 4.8V 208.4 oz-in15.00 kg-cm1.5 N-m | 4.8V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 2.08 oz59.0 g | 1.57×0.83×1.50 in 39.9×21.1×38.1 mm | — | Large | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | 90° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.03 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Graupner | DS 8700 G * | Hobby |
6.0V 56.6 oz-in4.08 kg-cm0.4 N-m 4.8V 56.0 oz-in4.03 kg-cm0.4 N-m |
4.8V 0.05 s/60°1,200.0 deg/s200.0 RPM | (add) | 2.12 oz60.0 g | 1.54×0.75×1.54 in 39.1×19.0×39.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | 3 ms | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.07 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8811 * | Hobby | 4.8V 250.0 oz-in18.00 kg-cm1.8 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 2.29 oz64.9 g | 1.57×0.83×1.57 in 39.9×21.1×39.9 mm | — | Large | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.56 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8822 * | Hobby |
6.0V 148.7 oz-in10.71 kg-cm1.1 N-m 4.8V 141.6 oz-in10.20 kg-cm1.0 N-m |
6.0V 0.07 s/60°888.9 deg/s148.1 RPM 4.8V 0.11 s/60°571.4 deg/s95.2 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.49–4.07 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | DS 8900G * | Hobby |
6.0V 65.1 oz-in4.69 kg-cm0.5 N-m 4.8V 48.1 oz-in3.46 kg-cm0.3 N-m |
6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 4.8V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.15 oz61.0 g | 1.59×0.83×1.57 in 40.4×21.1×39.9 mm | — | Standard | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.78–2.41 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Graupner
Stall Current: (add)
Shaft Power: 3.03–4.30 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.61 in 40.4×21.1×40.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.53 W
Weight: 4.59 oz130.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.48×1.26×2.402 in 63.0×32.0×61.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.51 W
Weight: 1.83 oz51.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.535×0.75×1.575 in 39.0×19.0×40.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 16.67 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 60 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: 1.61–1.95 A1610–1950 mA
Shaft Power: 1.97 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Graupner
Stall Current: (add)
Shaft Power: 1.37–2.00 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.36–2.04 W
Weight: 1.90 oz54.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.768×1.535 in 40.0×19.5×39.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.77–2.57 W
Weight: 1.78 oz50.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.88–2.82 W
Weight: 1.78 oz50.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.28–1.88 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.77–2.57 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: CORELESS
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.44–2.18 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.52–2.17 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.22–1.83 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.57 in 39.9×19.6×39.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1–16 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.83–2.57 W
Weight: 1.80 oz51.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.54 in 39.9×19.6×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: —
Weight: 4.52 oz128.0 g
Size Class: Large
Diameter: —
Dimensions: 2.48×1.26×2.402 in 63.0×32.0×61.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.73 W
Weight: 1.80 oz51.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.46 in 39.1×19.0×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.13–1.41 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.19–1.83 W
Weight: 2.08 oz59.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: MOS
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.14 W
Weight: 1.98 oz56.1 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: —
Weight: 1.98 oz56.0 g
Size Class: Unknown
Diameter: —
Dimensions: 1.535×0.748×1.535 in 39.0×19.0×39.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: MOS
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1–16 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 180 mm7.09 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.03 W
Weight: 2.08 oz59.0 g
Size Class: Large
Diameter: —
Dimensions: 1.57×0.83×1.50 in 39.9×21.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.07 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.54×0.75×1.54 in 39.1×19.0×39.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.56 W
Weight: 2.29 oz64.9 g
Size Class: Large
Diameter: —
Dimensions: 1.57×0.83×1.57 in 39.9×21.1×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 2.49–4.07 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.78–2.41 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.57 in 40.4×21.1×39.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.