Discover XQ-Power Servos in Our eBay Store!
Shop NowGraupner Servos (159)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Graupner | BS 9500G * | Hobby |
6.0V 43.9 oz-in3.16 kg-cm0.3 N-m 4.8V 35.4 oz-in2.55 kg-cm0.2 N-m |
6.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 4.8V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.26 oz64.0 g | 1.59×0.83×1.61 in 40.4×21.1×40.9 mm | — | Standard | (add) | Brushless | (add) | Plastic | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.09–1.80 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | BS 9631 * | Hobby |
6.0V 151.5 oz-in10.91 kg-cm1.1 N-m 4.8V 121.8 oz-in8.77 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.73 oz49.0 g | 1.59×0.83×1.61 in 40.4×21.1×40.9 mm | — | Standard | (add) | Brushless | (add) | Plastic | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.50–2.33 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | BS 9632 * | Hobby |
6.0V 151.5 oz-in10.91 kg-cm1.1 N-m 4.8V 121.8 oz-in8.77 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.94 oz55.0 g | 1.59×0.83×1.61 in 40.4×21.1×40.9 mm | — | Standard | (add) | Brushless | (add) | Hybrid | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.50–2.33 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | BS 9722 * | Hobby |
6.0V 219.5 oz-in15.81 kg-cm1.6 N-m 4.8V 171.3 oz-in12.33 kg-cm1.2 N-m |
6.0V 0.08 s/60°800.0 deg/s133.3 RPM 4.8V 0.11 s/60°571.4 deg/s95.2 RPM |
(add) | 2.29 oz65.0 g | 1.59×0.83×1.61 in 40.4×21.1×40.9 mm | — | Standard | (add) | Brushless | (add) | Metal | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.02–5.41 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | BS 9819 * | Hobby |
6.0V 383.7 oz-in27.63 kg-cm2.7 N-m 4.8V 320.0 oz-in23.04 kg-cm2.3 N-m |
6.0V 0.17 s/60°363.6 deg/s60.6 RPM 4.8V 0.20 s/60°307.7 deg/s51.3 RPM |
(add) | 2.29 oz65.0 g | 1.59×0.83×1.61 in 40.4×21.1×40.9 mm | — | Standard | (add) | Brushless | (add) | Metal | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.03–4.30 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 100 * | Hobby | 4.8V 4.0 oz-in0.29 kg-cm0.0 N-m | 4.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 0.16 oz4.5 g | 0.71×0.26×0.83 in 18.0×6.6×21.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.08 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 1041 * | Hobby | 4.8V 10.0 oz-in0.72 kg-cm0.1 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 0.20 oz5.7 g | 0.91×0.39×0.87 in 23.1×9.9×22.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.23 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 1081 * | Hobby | 4.8V 15.0 oz-in1.08 kg-cm0.1 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.22 oz6.2 g | 0.91×0.35×0.83 in 23.1×8.9×21.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.20 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 111 * | Hobby | 4.8V 7.0 oz-in0.50 kg-cm0.0 N-m | 4.8V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 0.21 oz6.0 g | 0.71×0.26×0.87 in 18.0×6.6×22.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.16 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 12021 * | Hobby | (add) | 4.8V 0.23 s/60°260.9 deg/s43.5 RPM | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 121 * | Hobby | 4.8V 21.0 oz-in1.51 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.35 oz9.9 g | 0.83×0.43×0.83 in 21.1×10.9×21.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 131 * | Hobby | 6.0V 18.4 oz-in1.32 kg-cm0.1 N-m | 6.0V 0.11 s/60°531.0 deg/s88.5 RPM | (add) | 0.28 oz7.8 g | 0.91×0.47×0.98 in 23.1×11.9×24.9 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.30 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 141 * | Hobby | 4.8V 10.0 oz-in0.72 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.19 oz5.4 g | 0.91×0.39×0.87 in 23.1×9.9×22.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.18 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 2041 * | Hobby | 4.8V 8.0 oz-in0.58 kg-cm0.1 N-m | 4.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 0.32 oz9.1 g | 0.87×0.43×1.02 in 22.1×10.9×25.9 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.16 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 2081 * | Hobby | 4.8V 22.0 oz-in1.58 kg-cm0.2 N-m | 4.8V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 0.35 oz9.9 g | 0.87×0.43×1.14 in 22.1×10.9×29.0 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.45 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 231 * | Hobby | 6.0V 8.5 oz-in0.61 kg-cm0.1 N-m | 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 0.21 oz6.0 g | 0.79×0.43×0.83 in 20.1×10.9×21.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | 45° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.26 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 261 * | Hobby | 4.8V 19.0 oz-in1.37 kg-cm0.1 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 0.28 oz7.9 g | 0.83×0.43×0.83 in 21.1×10.9×21.1 mm | — | Micro | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.23 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 271 * | Hobby | 4.8V 21.0 oz-in1.51 kg-cm0.1 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 0.28 oz7.9 g | 0.83×0.43×0.83 in 21.1×10.9×21.1 mm | — | Micro | (add) | (add) | (add) | Metal | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.30 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 3041 * | Hobby | 4.8V 36.0 oz-in2.59 kg-cm0.3 N-m | 4.8V 0.24 s/60°250.0 deg/s41.7 RPM | (add) | 0.92 oz26.1 g | 1.30×0.59×1.06 in 33.0×15.0×26.9 mm | — | Mini | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 3111 * | Hobby | 4.8V 36.0 oz-in2.59 kg-cm0.3 N-m | 4.8V 0.33 s/60°181.8 deg/s30.3 RPM | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | (add) | 23 | (add) | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.20 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 3141 * | Hobby | 4.8V 49.0 oz-in3.53 kg-cm0.3 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.65 oz18.4 g | 1.10×0.51×1.18 in 27.9×13.0×30.0 mm | — | Mini | (add) | (add) | (add) | Plastic | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 3241 * | Hobby | 4.8V 43.0 oz-in3.10 kg-cm0.3 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 1.06 oz30.1 g | 1.30×0.59×1.06 in 33.0×15.0×26.9 mm | — | Mini | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 3341 * | Hobby | 4.8V 70.0 oz-in5.04 kg-cm0.5 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 1.06 oz30.1 g | 1.30×0.59×1.30 in 33.0×15.0×33.0 mm | — | Mini | (add) | (add) | (add) | Plastic | 23 | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.92 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 341 * | Hobby | 4.8V 21.0 oz-in1.51 kg-cm0.1 N-m | 4.8V 0.28 s/60°214.3 deg/s35.7 RPM | (add) | 0.60 oz17.0 g | 1.10×0.51×1.18 in 27.9×13.0×30.0 mm | — | Mini | (add) | (add) | (add) | Plastic | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.14 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Graupner | C 351 * | Hobby | 4.8V 51.0 oz-in3.67 kg-cm0.4 N-m | 4.8V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 0.88 oz24.9 g | 1.10×0.51×1.18 in 27.9×13.0×30.0 mm | — | Mini | (add) | (add) | (add) | Metal | 23 | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.63 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Graupner
Stall Current: (add)
Shaft Power: 1.09–1.80 W
Weight: 2.26 oz64.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.61 in 40.4×21.1×40.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.50–2.33 W
Weight: 1.73 oz49.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.61 in 40.4×21.1×40.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 1.50–2.33 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.61 in 40.4×21.1×40.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.02–5.41 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.61 in 40.4×21.1×40.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 3.03–4.30 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.61 in 40.4×21.1×40.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.08 W
Weight: 0.16 oz4.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.71×0.26×0.83 in 18.0×6.6×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.23 W
Weight: 0.20 oz5.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.39×0.87 in 23.1×9.9×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.20 W
Weight: 0.22 oz6.2 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.35×0.83 in 23.1×8.9×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.16 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.71×0.26×0.87 in 18.0×6.6×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.39 W
Weight: 0.35 oz9.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.83×0.43×0.83 in 21.1×10.9×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.30 W
Weight: 0.28 oz7.8 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×0.98 in 23.1×11.9×24.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.18 W
Weight: 0.19 oz5.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.39×0.87 in 23.1×9.9×22.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.16 W
Weight: 0.32 oz9.1 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.43×1.02 in 22.1×10.9×25.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.45 W
Weight: 0.35 oz9.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.43×1.14 in 22.1×10.9×29.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.26 W
Weight: 0.21 oz6.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.43×0.83 in 20.1×10.9×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: 45°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.23 W
Weight: 0.28 oz7.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.83×0.43×0.83 in 21.1×10.9×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.30 W
Weight: 0.28 oz7.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.83×0.43×0.83 in 21.1×10.9×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.28 W
Weight: 0.92 oz26.1 g
Size Class: Mini
Diameter: —
Dimensions: 1.30×0.59×1.06 in 33.0×15.0×26.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.20 W
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.57 W
Weight: 0.65 oz18.4 g
Size Class: Mini
Diameter: —
Dimensions: 1.10×0.51×1.18 in 27.9×13.0×30.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.50 W
Weight: 1.06 oz30.1 g
Size Class: Mini
Diameter: —
Dimensions: 1.30×0.59×1.06 in 33.0×15.0×26.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.92 W
Weight: 1.06 oz30.1 g
Size Class: Mini
Diameter: —
Dimensions: 1.30×0.59×1.30 in 33.0×15.0×33.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.14 W
Weight: 0.60 oz17.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.10×0.51×1.18 in 27.9×13.0×30.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Graupner
Stall Current: (add)
Shaft Power: 0.63 W
Weight: 0.88 oz24.9 g
Size Class: Mini
Diameter: —
Dimensions: 1.10×0.51×1.18 in 27.9×13.0×30.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.