Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Corally | CS-5016 | Hobby |
8.4V 229.2 oz-in16.50 kg-cm1.6 N-m 7.4V 200.0 oz-in14.40 kg-cm1.4 N-m 6.0V 163.9 oz-in11.80 kg-cm1.2 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 2.54 oz72.0 g | 1.59×0.81×1.42 in 40.4×20.6×36.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | Water Resistant | (add) | JR (Universal) | (add) | Belgium | 4.33–8.48 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corally | CS-5226 | Hobby |
8.4V 355.6 oz-in25.60 kg-cm2.5 N-m 7.4V 313.9 oz-in22.60 kg-cm2.2 N-m 6.0V 254.2 oz-in18.30 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.42 in 39.9×20.1×36.1 mm | — | Standard | Aluminum | Coreless | (add) | Titanium | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | Water Resistant | (add) | JR (Universal) | (add) | Belgium | 5.22–9.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corally | CS-5245 | Hobby |
8.4V 651.4 oz-in46.91 kg-cm4.6 N-m 7.4V 594.5 oz-in42.81 kg-cm4.2 N-m 6.0V 520.9 oz-in37.51 kg-cm3.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.57 oz73.0 g | 1.57×0.79×1.46 in 39.9×20.1×37.1 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | Water Resistant | (add) | JR (Universal) | (add) | Belgium | 8.03–12.05 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corally | OC-27 | Hobby |
8.4V 379.2 oz-in27.31 kg-cm2.7 N-m 7.4V 327.8 oz-in23.60 kg-cm2.3 N-m 6.0V 245.9 oz-in17.70 kg-cm1.7 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.65 oz75.0 g | 1.59×0.80×1.44 in 40.4×20.3×36.6 mm | — | Standard | Aluminum | Cored | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Potentiometer | (add) | (add) | 5–8.4 V | (add) | (add) | (add) | IP67 | (add) | JR (Universal) | (add) | Belgium | 3.03–6.37 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | BL1028HV | Hobby |
8.4V 347.3 oz-in25.00 kg-cm2.5 N-m 7.4V 291.7 oz-in21.00 kg-cm2.1 N-m 6.0V 236.1 oz-in17.00 kg-cm1.7 N-m 5.0V 222.2 oz-in16.00 kg-cm1.6 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.89 oz82.0 g | 1.57×0.83×1.50 in 40.0×21.0×38.0 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Single Bearing | Digital | (add) | 40° | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.42–7.13 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | BL1029HV | Hobby |
8.4V 347.3 oz-in25.00 kg-cm2.5 N-m 7.4V 291.7 oz-in21.00 kg-cm2.1 N-m 6.0V 236.1 oz-in17.00 kg-cm1.7 N-m 5.0V 222.2 oz-in16.00 kg-cm1.6 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 5.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.89 oz82.0 g | 1.57×0.83×1.50 in 40.0×21.0×38.0 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Single Bearing | Digital | (add) | 40° | (add) | (add) | (add) | 1500 µs | 1 µs | (add) | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.42–7.13 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | BL2068HV | Hobby |
8.4V 60.0 oz-in4.32 kg-cm0.4 N-m 6.0V 50.0 oz-in3.60 kg-cm0.4 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 3.10 oz88.0 g | 1.61×0.79×1.57 in 41.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Single Bearing | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | 1 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 295 mm11.61 in | China | 0.92–1.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | BL6168 | Hobby |
6.0V 444.5 oz-in32.01 kg-cm3.1 N-m 4.8V 347.3 oz-in25.00 kg-cm2.5 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.24 oz63.6 g | 1.46×0.83×1.63 in 37.0×21.0×41.5 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Single Bearing | Digital | (add) | 40° | (add) | (add) | (add) | (add) | 3 µs | (add) | (add) | PWM | (add) | 4.8–6.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.57–5.87 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS-538MG | Hobby | 4.8V 97.0 oz-in6.98 kg-cm0.7 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 2.05 oz58.0 g | 1.58×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Single Bearing | Digital | (add) | 40° | (add) | 2 ms | (add) | (add) | 3 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 215 mm8.46 in | (add) | 1.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS538HS | Hobby |
8.4V 153.2 oz-in11.03 kg-cm1.1 N-m 6.0V 113.3 oz-in8.16 kg-cm0.8 N-m |
8.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | 3 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 60 mm2.36 in | China | 1.61–2.36 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS538S | Hobby |
6.0V 113.3 oz-in8.16 kg-cm0.8 N-m 5.0V 80.5 oz-in5.80 kg-cm0.6 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 5.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | 3 µs | (add) | (add) | PWM | (add) | 5–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 60 mm2.36 in | China | 1.06–1.61 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS558HS | Hobby |
7.4V 277.6 oz-in19.99 kg-cm2.0 N-m 6.0V 213.2 oz-in15.35 kg-cm1.5 N-m |
7.4V 0.20 s/60°300.0 deg/s50.0 RPM 6.0V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | 3 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 60 mm2.36 in | China | 1.79–2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS558HV | Hobby |
7.4V 194.5 oz-in14.00 kg-cm1.4 N-m 6.0V 166.7 oz-in12.00 kg-cm1.2 N-m |
7.4V 0.18 s/60°333.3 deg/s55.6 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | 40° | (add) | (add) | (add) | (add) | 3 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.54–2.00 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS558MG | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 4.8V 130.6 oz-in9.40 kg-cm0.9 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | 40° | (add) | (add) | (add) | (add) | 3 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.10–1.28 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS558S | Hobby |
8.4V 213.2 oz-in15.35 kg-cm1.5 N-m 6.0V 173.5 oz-in12.49 kg-cm1.2 N-m |
8.4V 0.20 s/60°300.0 deg/s50.0 RPM 6.0V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.05 oz58.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Brushed | (add) | Metal | 25 | Single Bearing | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | 3 µs | (add) | (add) | PWM | (add) | 5–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 60 mm2.36 in | China | 1.46–1.97 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS559HV | Hobby |
7.4V 277.8 oz-in20.00 kg-cm2.0 N-m 6.0V 222.2 oz-in16.00 kg-cm1.6 N-m |
7.4V 0.18 s/60°333.3 deg/s55.6 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.31 oz65.5 g | 1.57×0.83×1.61 in 40.0×21.0×41.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | 40° | (add) | (add) | (add) | (add) | 3 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.05–2.85 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS560WP | Hobby |
7.4V 208.4 oz-in15.00 kg-cm1.5 N-m 6.0V 180.6 oz-in13.00 kg-cm1.3 N-m |
7.4V 0.16 s/60°375.0 deg/s62.5 RPM 6.0V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.24 oz63.6 g | 1.65×0.79×1.61 in 41.8×20.0×40.8 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 40° | (add) | (add) | (add) | (add) | 3 µs | (add) | (add) | PWM | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.85–2.41 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS561WP | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 4.8V 118.1 oz-in8.50 kg-cm0.8 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.24 oz63.6 g | 1.65×0.79×1.61 in 41.8×20.0×40.8 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 40° | (add) | (add) | (add) | (add) | 3 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.21–1.61 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Corona | DS568WP | Hobby |
8.4V 277.6 oz-in19.99 kg-cm2.0 N-m 6.0V 222.1 oz-in15.99 kg-cm1.6 N-m |
8.4V 0.16 s/60°375.0 deg/s62.5 RPM 6.0V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.46 oz69.6 g | 1.65×0.82×1.61 in 41.8×20.8×40.8 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | (add) | 3 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 275 mm10.83 in | China | 2.28–3.21 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| CubeMars | AK10-9 V2.0 KV100 | Robotics | 48.0V 5,381.3 oz-in387.49 kg-cm38.0 N-m |
48.0V 0.02 s/60°3,157.9 deg/s526.3 RPM 24.0V 0.04 s/60°1,578.9 deg/s263.2 RPM |
≤41.2 A≤41200 mA | 33.86 oz960.0 g | 2.43×—×— in61.7×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 9.000 | (add) | 720.0 W | (add) | (add) | Servo, MIT | 12.600 A @ 48.0V12,600 mA @ 48.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK10-9 V2.0 KV60 | Robotics | 48.0V 6,797.4 oz-in489.46 kg-cm48.0 N-m |
48.0V 0.03 s/60°1,935.5 deg/s322.6 RPM 24.0V 0.06 s/60°967.7 deg/s161.3 RPM |
≤29.8 A≤29800 mA | 33.86 oz960.0 g | 2.43×—×— in61.7×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 9.000 | (add) | 430.0 W | (add) | (add) | Servo, MIT | 10.600 A @ 48.0V10,600 mA @ 48.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK10-9 V3.0 KV60 | Robotics | 48.0V 7,505.4 oz-in540.45 kg-cm53.0 N-m | 48.0V 0.03 s/60°1,935.5 deg/s322.6 RPM | ≤31.9 A≤31900 mA | 33.16 oz940.0 g | 2.43×—×— in61.7×—×— mm | 98.0 mm3.86 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 48–48 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 9.000 | (add) | 442.0 W | (add) | (add) | Servo, MIT | 10.700 A @ 48.0V10,700 mA @ 48.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK40-10 KV170 | Robotics | 24.0V 580.6 oz-in41.81 kg-cm4.1 N-m | 24.0V 0.02 s/60°2,608.7 deg/s434.8 RPM | ≤7.3 A≤7300 mA | 6.53 oz185.0 g | 1.46×—×— in37.0×—×— mm | 53.0 mm2.09 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 10.000 | (add) | 59.0 W | (add) | (add) | Servo, MIT | 2.700 A @ 24.0V2,700 mA @ 24.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK45-10 KV75 | Robotics | 24.0V 991.3 oz-in71.38 kg-cm7.0 N-m | 24.0V 0.06 s/60°1,071.4 deg/s178.6 RPM | ≤5 A≤5000 mA | 9.17 oz260.0 g | 1.69×—×— in43.0×—×— mm | 53.0 mm2.09 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 10.000 | (add) | 39.0 W | (add) | (add) | Servo, MIT | 2.100 A @ 24.0V2,100 mA @ 24.0V | Multi-turn | (add) | (add) | (add) | ||
| CubeMars | AK45-36 KV80 | Robotics | 24.0V 3,398.7 oz-in244.73 kg-cm24.0 N-m | 24.0V 0.19 s/60°312.5 deg/s52.1 RPM | ≤6.5 A≤6500 mA | 11.99 oz340.0 g | 2.13×—×— in54.0×—×— mm | 55.0 mm2.17 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | CAN | Yes | 24–24 V | (add) | (add) | -20–50°C-4.0–122.0°F | (add) | (add) | XT30 | (add) | (add) | — | Cylindrical | (add) | 16,384 p/r | 36.000 | (add) | 33.0 W | (add) | (add) | Servo, MIT | 2.000 A @ 24.0V2,000 mA @ 24.0V | Multi-turn | (add) | (add) | (add) | ||
Make: Corally
Stall Current: (add)
Shaft Power: 4.33–8.48 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.42 in 40.4×20.6×36.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Belgium
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corally
Stall Current: (add)
Shaft Power: 5.22–9.39 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.42 in 39.9×20.1×36.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Belgium
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corally
Stall Current: (add)
Shaft Power: 8.03–12.05 W
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.46 in 39.9×20.1×37.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Belgium
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corally
Stall Current: (add)
Shaft Power: 3.03–6.37 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.44 in 40.4×20.3×36.6 mm
Case Material: Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Belgium
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 3.42–7.13 W
Weight: 2.89 oz82.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.50 in 40.0×21.0×38.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 3.42–7.13 W
Weight: 2.89 oz82.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.50 in 40.0×21.0×38.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 0.92–1.39 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.57 in 41.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 295 mm11.61 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 3.57–5.87 W
Weight: 2.24 oz63.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.46×0.83×1.63 in 37.0×21.0×41.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.28 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: 2 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 215 mm8.46 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.61–2.36 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 60 mm2.36 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.06–1.61 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 60 mm2.36 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.79–2.57 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 60 mm2.36 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.54–2.00 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.10–1.28 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.46–1.97 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 60 mm2.36 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 2.05–2.85 W
Weight: 2.31 oz65.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.83×1.61 in 40.0×21.0×41.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.85–2.41 W
Weight: 2.24 oz63.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.79×1.61 in 41.8×20.0×40.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 1.21–1.61 W
Weight: 2.24 oz63.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.79×1.61 in 41.8×20.0×40.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 40°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Corona
Stall Current: (add)
Shaft Power: 2.28–3.21 W
Weight: 2.46 oz69.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.65×0.82×1.61 in 41.8×20.8×40.8 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 3 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 275 mm10.83 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: CubeMars
Stall Current: ≤41.2 A≤41200 mA
Shaft Power: —
Weight: 33.86 oz960.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 720.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤29.8 A≤29800 mA
Shaft Power: —
Weight: 33.86 oz960.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 430.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤31.9 A≤31900 mA
Shaft Power: —
Weight: 33.16 oz940.0 g
Size Class: Custom
Diameter: 98.0 mm3.86 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 48–48 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 9.000
Baud Rate: —
Output Power: 442.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤7.3 A≤7300 mA
Shaft Power: —
Weight: 6.53 oz185.0 g
Size Class: Custom
Diameter: 53.0 mm2.09 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 10.000
Baud Rate: —
Output Power: 59.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤5 A≤5000 mA
Shaft Power: —
Weight: 9.17 oz260.0 g
Size Class: Custom
Diameter: 53.0 mm2.09 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 10.000
Baud Rate: —
Output Power: 39.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Make: CubeMars
Stall Current: ≤6.5 A≤6500 mA
Shaft Power: —
Weight: 11.99 oz340.0 g
Size Class: Custom
Diameter: 55.0 mm2.17 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: CAN
Programmable: Yes
Op. Voltage: 24–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–50°C-4.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: XT30
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 16,384 p/r
Gear Ratio: 36.000
Baud Rate: —
Output Power: 33.0 W
Radial Load: —
MCU: —
Operating Modes: Servo, MIT
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.