Discover XQ-Power Servos in Our eBay Store!
Shop NowFeetech Servos (126)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| FeeTech | FS5109R | Robotics |
6.0V 141.9 oz-in10.22 kg-cm1.0 N-m 4.8V 125.2 oz-in9.02 kg-cm0.9 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
≤1.7 A≤1700 mA | 2.14 oz60.6 g | 1.58×0.79×1.53 in 40.1×20.1×38.9 mm | (add) | Standard | Nylon / Fiberglass | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | Counterclockwise | 360° | (add) | (add) | 500–2500 µs | 1500 µs | 65 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 1.29–1.64 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| FeeTech | FS5113M | Hobby |
6.0V 194.8 oz-in14.03 kg-cm1.4 N-m 4.8V 173.9 oz-in12.52 kg-cm1.2 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.12 oz60.0 g | 1.58×0.79×1.53 in 40.1×20.1×38.9 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 1.79–2.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FS5113R | Robotics |
6.0V 194.8 oz-in14.03 kg-cm1.4 N-m 4.8V 173.9 oz-in12.52 kg-cm1.2 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
≤2 A≤2000 mA | 1.98 oz56.0 g | 1.58×0.79×1.53 in 40.1×20.1×38.9 mm | (add) | Standard | Nylon / Fiberglass | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | Counterclockwise | 360° | 360 | (add) | 500–2500 µs | 1500 µs | 10 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 1.79–2.25 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| FeeTech | FS5115M | Hobby |
6.0V 215.6 oz-in15.52 kg-cm1.5 N-m 4.8V 194.8 oz-in14.03 kg-cm1.4 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.19 oz62.0 g | 1.61×0.79×1.54 in 40.8×20.1×39.0 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 2.00–2.49 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FS6530M * | Hobby |
6.0V 418.7 oz-in30.15 kg-cm3.0 N-m 4.8V 340.8 oz-in24.54 kg-cm2.4 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.25 s/60°240.0 deg/s40.0 RPM |
(add) | 4.83 oz137.0 g | 2.34×1.15×1.95 in 59.5×29.1×49.5 mm | — | Giant | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Analog | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 250 mm9.84 in | China | 2.52–3.87 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FS90 | Hobby | 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | 0.7–0.8 A700–800 mA | 0.32 oz9.0 g | 0.91×0.49×0.87 in 23.2×12.5×22.0 mm | — | Micro | Plastic | Brushed | (add) | Plastic | 21 | Bushing | Analog | Counterclockwise | 120° | 180 | 20 ms | 900–2100 µs | 1500 µs | 8 µs | 50 Hz | Potentiometer | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 200 mm7.87 in | China | 0.28 W | — | 4.9 mm | — | — | — | — | — | — | Position | (add) | Positional | 5.000 A5,000 mA | — | 3-5V | ||
| FeeTech | FS90MG | Hobby |
6.0V 25.0 oz-in1.80 kg-cm0.2 N-m 4.8V 20.9 oz-in1.50 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.44 oz12.5 g | 0.89×0.48×1.05 in 22.5×12.1×26.7 mm | — | Micro | (add) | Brushed | (add) | Metal | (add) | Bushing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -1–70°C30.2–158.0°F | (add) | (add) | JR (Universal) | 250 mm9.84 in | China | 0.32–0.46 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 5.000 A5,000 mA | — | — | ||
| FeeTech | FS90R | Robotics | 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | ≤0.8 A≤800 mA | 0.32 oz9.0 g | 0.89×0.48×1.09 in 22.5×12.1×27.7 mm | (add) | Micro | Nylon / Fiberglass | Brushed | (add) | Plastic | 21 | Bushing | Analog | Counterclockwise | 90° | (add) | (add) | 700–2300 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 250 mm9.84 in | China | 0.28 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Continuous | 5.000 A5,000 mA | (add) | (add) | ||
| FeeTech | FS9257 * | Hobby |
6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 4.8V 27.8 oz-in2.00 kg-cm0.2 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.88 oz25.0 g | 1.43×0.60×1.15 in 36.2×15.2×29.2 mm | — | Mini | (add) | Brushed | (add) | Plastic | (add) | Dual Bearings | Analog | (add) | 120° | (add) | (add) | 900–2100 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 0.57–0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FS9257D * | Hobby |
6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 4.8V 27.8 oz-in2.00 kg-cm0.2 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.88 oz25.0 g | 1.43×0.60×1.15 in 36.2×15.2×29.2 mm | — | Mini | (add) | Brushed | (add) | Plastic | (add) | Bushing | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | China | 0.64–0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FS9257DM * | Hobby |
6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 4.8V 27.8 oz-in2.00 kg-cm0.2 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.95 oz27.0 g | 1.43×0.60×1.15 in 36.2×15.2×29.2 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | China | 0.64–0.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FS9357D * | Hobby |
6.0V 52.9 oz-in3.81 kg-cm0.4 N-m 4.8V 45.9 oz-in3.31 kg-cm0.3 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.95 oz27.0 g | 1.43×0.60×1.15 in 36.2×15.2×29.2 mm | — | Mini | (add) | Coreless | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | China | 1.06–1.40 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT2311M * | Hobby |
6.0V 16.7 oz-in1.20 kg-cm0.1 N-m 4.8V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.49 oz14.0 g | 0.91×0.48×1.01 in 23.2×12.3×25.6 mm | — | Micro | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.26–0.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT2312M * | Hobby |
6.0V 20.9 oz-in1.50 kg-cm0.1 N-m 4.8V 16.7 oz-in1.20 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.49 oz14.0 g | 0.91×0.48×1.01 in 23.2×12.3×25.6 mm | — | Micro | (add) | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | JR (Universal) | 200 mm7.87 in | China | 0.26–0.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT2331M | Hobby |
6.0V 48.7 oz-in3.51 kg-cm0.3 N-m 4.8V 41.7 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
≤0.4 A≤400 mA | 0.71 oz20.0 g | 0.91×0.47×1.08 in 23.0×12.0×27.5 mm | — | Micro | Aluminum | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | Counterclockwise | 240° | (add) | (add) | 900–2100 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | 260 mm10.24 in | China | 0.86–1.29 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT4311M * | Hobby |
6.0V 32.0 oz-in2.30 kg-cm0.2 N-m 4.8V 29.2 oz-in2.10 kg-cm0.2 N-m |
6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.02 oz29.0 g | 1.39×0.60×1.16 in 35.2×15.2×29.5 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | China | 0.67–1.18 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT4321M * | Hobby |
6.0V 36.2 oz-in2.61 kg-cm0.3 N-m 4.8V 30.6 oz-in2.20 kg-cm0.2 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.02 oz29.0 g | 1.39×0.60×1.16 in 35.2×15.2×29.5 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.51–0.74 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5118M | Hobby | 6.0V 243.1 oz-in17.50 kg-cm1.7 N-m | 6.0V 0.17 s/60°359.3 deg/s59.9 RPM | (add) | 2.29 oz65.0 g | 1.58×0.79×1.53 in 40.1×20.1×38.9 mm | — | Standard | (add) | Cored | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 280° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 2.69 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5320M | Hobby | 7.4V 277.8 oz-in20.00 kg-cm2.0 N-m | 7.4V 0.15 s/60°397.4 deg/s66.2 RPM | (add) | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Large | (add) | Cored | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.40 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5325M | Hobby | 7.4V 347.3 oz-in25.00 kg-cm2.5 N-m | 7.4V 0.15 s/60°397.4 deg/s66.2 RPM | (add) | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Large | (add) | Cored | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5330M | Hobby | 7.4V 493.1 oz-in35.51 kg-cm3.5 N-m |
7.4V 0.19 s/60°315.8 deg/s52.6 RPM 7.4V 0.19 s/60°315.8 deg/s52.6 RPM |
3.2–3.9 A3200–3900 mA | 2.36 oz67.0 g | 2.17×0.79×1.69 in 55.0×20.0×43.0 mm | — | Large | Plastic / Aluminum | Cored | (add) | Steel | 25 | Dual Bearings | Digital | Counterclockwise | 180° | (add) | 20 ms | 500–2500 µs | 1500 µs | 4 µs | 50 Hz | Potentiometer | PWM | (add) | 4–8.4 V | (add) | (add) | -20–60°C-4.0–140.0°F | IP54 | (add) | JR Universal | 300 mm11.81 in | China | 4.80 W | — | 5.9 mm | — | — | — | — | — | — | Position | (add) | Positional | 0.006 A6 mA | 0.500° | — | ||
| Feetech | FT5420M | Hobby | 8.4V 312.5 oz-in22.50 kg-cm2.2 N-m | 8.4V 0.10 s/60°631.6 deg/s105.3 RPM | (add) | 2.14 oz60.6 g | 1.60×0.79×1.05 in 40.6×20.0×26.6 mm | — | Low Profile | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 6.08 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5425BL | Hobby | 8.4V 395.9 oz-in28.51 kg-cm2.8 N-m | 8.4V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 2.38 oz67.6 g | 1.60×0.79×1.18 in 40.6×20.0×30.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 9.15 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT5478M | Hobby | 8.4V 312.5 oz-in22.50 kg-cm2.2 N-m |
8.4V 0.11 s/60°571.4 deg/s95.2 RPM 8.4V 0.11 s/60°571.4 deg/s95.2 RPM |
(add) | 1.47 oz41.6 g | 1.60×0.79×1.14 in 40.6×20.0×29.0 mm | — | Low Profile | (add) | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 5.50 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| FeeTech | FT5478M * | Hobby |
6.0V 125.2 oz-in9.02 kg-cm0.9 N-m 4.8V 104.3 oz-in7.51 kg-cm0.7 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 1.80 oz51.0 g | 1.58×0.79×1.12 in 40.1×20.0×28.5 mm | — | Low Profile | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 300 mm11.81 in | China | 1.61–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: FeeTech
Stall Current: ≤1.7 A≤1700 mA
Shaft Power: 1.29–1.64 W
Weight: 2.14 oz60.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.1×20.1×38.9 mm
Case Material: Nylon / Fiberglass
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 65 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 1.79–2.25 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.1×20.1×38.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: ≤2 A≤2000 mA
Shaft Power: 1.79–2.25 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.1×20.1×38.9 mm
Case Material: Nylon / Fiberglass
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: Counterclockwise
Op. Range: 360°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 10 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 2.00–2.49 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.54 in 40.8×20.1×39.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 2.52–3.87 W
Weight: 4.83 oz137.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.34×1.15×1.95 in 59.5×29.1×49.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: 0.7–0.8 A700–800 mA
Shaft Power: 0.28 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.49×0.87 in 23.2×12.5×22.0 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Analog
Direction: Counterclockwise
Op. Range: 120°
Mech. Limit: 180
Pulse Cycle: 20 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 8 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: China
Shape: —
Shaft Size: 4.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.32–0.46 W
Weight: 0.44 oz12.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.48×1.05 in 22.5×12.1×26.7 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -1–70°C30.2–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: ≤0.8 A≤800 mA
Shaft Power: 0.28 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.48×1.09 in 22.5×12.1×27.7 mm
Case Material: Nylon / Fiberglass
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Analog
Direction: Counterclockwise
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 700–2300 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: China
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.57–0.81 W
Weight: 0.88 oz25.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.43×0.60×1.15 in 36.2×15.2×29.2 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.64–0.81 W
Weight: 0.88 oz25.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.43×0.60×1.15 in 36.2×15.2×29.2 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.64–0.81 W
Weight: 0.95 oz27.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.43×0.60×1.15 in 36.2×15.2×29.2 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 1.06–1.40 W
Weight: 0.95 oz27.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.43×0.60×1.15 in 36.2×15.2×29.2 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.26–0.39 W
Weight: 0.49 oz14.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.48×1.01 in 23.2×12.3×25.6 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.26–0.39 W
Weight: 0.49 oz14.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.48×1.01 in 23.2×12.3×25.6 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 200 mm7.87 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: ≤0.4 A≤400 mA
Shaft Power: 0.86–1.29 W
Weight: 0.71 oz20.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 240°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.67–1.18 W
Weight: 1.02 oz29.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.39×0.60×1.16 in 35.2×15.2×29.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 0.51–0.74 W
Weight: 1.02 oz29.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.39×0.60×1.16 in 35.2×15.2×29.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 2.69 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.53 in 40.1×20.1×38.9 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 280°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.40 W
Weight: 2.36 oz67.0 g
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 4.25 W
Weight: 2.36 oz67.0 g
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 3.2–3.9 A3200–3900 mA
Shaft Power: 4.80 W
Weight: 2.36 oz67.0 g
Size Class: Large
Diameter: —
Dimensions: 2.17×0.79×1.69 in 55.0×20.0×43.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: 20 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: IP54
Certification: (add)
Connector: JR Universal
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: 5.9 mm
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: Feetech
Stall Current: (add)
Shaft Power: 6.08 W
Weight: 2.14 oz60.6 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.60×0.79×1.05 in 40.6×20.0×26.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 9.15 W
Weight: 2.38 oz67.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.79×1.18 in 40.6×20.0×30.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 5.50 W
Weight: 1.47 oz41.6 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.60×0.79×1.14 in 40.6×20.0×29.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: FeeTech
Stall Current: (add)
Shaft Power: 1.61–2.57 W
Weight: 1.80 oz51.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.58×0.79×1.12 in 40.1×20.0×28.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.