Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-08
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | FS5113M |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
194.80 oz-in
14.03 kg-cm
1.4 N-m
4.8V
173.90 oz-in
12.52 kg-cm
1.2 N-m
Above Average
|
| Speed |
6.0V
0.16 sec/60°
375.0 deg/s
62.5 RPM
4.8V
0.18 sec/60°
333.3 deg/s
55.6 RPM
Average
|
| Running Current |
6.0V
0.190 A
190 mA
4.8V
0.160 A
160 mA
Above Average
|
| Stall Current | 1.2–1.5 A1200–1500 mAAverage |
| Physical | |
| Weight | 1.98 oz56.0 gBelow Average |
| Dimensions |
L 1.606 in W 0.791 in H 1.496 in L 40.8 mm W 20.1 mm H 38.0 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | Brushed |
| Gears | Metal |
| Gear Spline/Teeth | 25 T |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Analog |
| Direction | Counterclockwise |
| Rotational Range | 180° |
| Mechanical Limit | 200° |
| Pulse Width | 500-2500 µs |
| Neutral Position | 1500 µs |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Temperature | -15–70 °C5–158 °F |
| Idle Current | 0.007 A7 mA |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Wire Length | 300 mm11.81 in |
| Origin | |
| Country of Origin | China |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Above Average Stronger than 90% of 192 Analog Standard servos at 4.8V |
| Speed | Average Faster than 47% of 190 Analog Standard servos at 4.8V |
| Weight | Below Average Lighter than 21% of 448 Analog Standard servos |
| Running Current | Above Average Lower draw than 69% of 50 Analog Standard servos at 4.8V |
| Stall Current | Average Lower draw than 52% of 64 Analog Standard servos |
Performance Analysis
| Shaft Power | 1.79–2.25 W |
| Power Density | 1.185 W/in³ More power-dense than 87% of 437 Analog Standard servos |
| Torque Density | 3.1054 oz-in/g Stronger than 90% of 192 Analog Standard servos |
| Torque-to-Volume Ratio | 91.51 oz-in/in³ Denser torque than 91% of 192 Analog Standard servos |
| Speed-to-Weight | 0.09921 (1/sec·g) Faster than 25% of 190 Analog Standard servos |
| Speed-Torque Trade-off | 31.31 Better balanced than 88% of 190 Analog Standard servos |
| Current-per-Torque Ratio | 0.0086 A/oz-in 5th-highest current-per-torque ratio of 58 Analog Standard servos |
| Idle-to-Running Current Ratio | 0.044 Lower idle draw than 53% of 39 Analog Standard servos |
| No-Load vs Stall Current Spread | 9.38 Narrower current spread than 28% of 37 Analog Standard servos |
| Torque Gain per Volt | 10.02%/V More voltage-responsive (torque) than 29% of 145 Analog Standard servos |
| Speed Gain per Volt | 10.43%/V More voltage-responsive (speed) than 16% of 147 Analog Standard servos |
| Voltage Range Width | 1.2 V Wider voltage range than 22% of 229 Analog Standard servos |
Similar Active Servos
Reviews (1)
-
Pipit Purwadi
June 2, 2014Application(s): I use it in a Axial SCX10 Wrangler RC car for steering.
Comments: before I use it in my SCX10 Wrangler, the servo was used in a HSP Pangolin RC car. I use this servo a lot in the rain and water (river, beach). I was amazed because this servo capable of working under the rain or water. well, i'm not saying that I use it "dive" in the water, but only a little splash of water. for cheap servo, this is fun enough to use it in not to deep water.