Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Unitree | B1-16 | Robotics | 64.0V 19,825.7 oz-in1,427.60 kg-cm140.0 N-m | 64.0V 0.07 s/60°895.5 deg/s149.3 RPM | 40–64.665 A40000–64665 mA | 61.38 oz1,740.0 g | 4.57×—×— in116.0×—×— mm | 116.0 mm4.57 in | Custom | Aluminum | Brushless | FET | Steel | (add) | Dual Bearings | Digital | Bidirectional | (add) | (add) | (add) | (add) | (add) | 1 µs | 1000 Hz | Absolute Encoder | CAN / RS485 | Yes | 36–64 V | External | (add) | -10–60°C14.0–140.0°F | IP68 | CE | (add) | 100 mm3.94 in | (add) | — | Cylindrical | 20.0 mm | 32,768 p/r | 16.000 | 4.8 Mbps | 500.0 W | 1,000.0 N | STM32 | Position, Velocity, Torque, Stiffness, Damping | (add) | (add) | 270.000 A270,000 mA | 0.050° | 5V | ||
| Unitree | GO-M8010-6 | Robotics | 24.0V 3,356.2 oz-in241.67 kg-cm23.7 N-m | 24.0V 0.04 s/60°1,714.3 deg/s285.7 RPM | ≤40 A≤40000 mA | 18.70 oz530.0 g | 3.80×—×— in96.5×—×— mm | 96.5 mm3.80 in | Custom | Aluminum | Brushless | FET | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6000 Hz | Absolute Encoder | RS485 | Yes | 12–30 V | (add) | (add) | -5–40°C23.0–104.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 6.330 | 4 Mbps | (add) | (add) | (add) | Position, Velocity, Torque, Impedance | (add) | (add) | (add) | (add) | (add) | ||
| Unitree | IM6014 | Robotics | 60.0V 4,871.5 oz-in350.78 kg-cm34.4 N-m | 60.0V 0.02 s/60°3,157.9 deg/s526.3 RPM | ≤40 A≤40000 mA | 18.87 oz535.0 g | 2.56×—×— in65.0×—×— mm | 65.0 mm2.56 in | Custom | Aluminum / Plastic | Brushless | FET | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 400 Hz | Absolute Encoder | CAN / RS485 | Yes | 24–75 V | (add) | (add) | -20–90°C-4.0–194.0°F | (add) | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 32,768 p/r | 12.660 | 4 Mbps–6 Mbps | (add) | (add) | (add) | Position, Velocity, Torque | (add) | (add) | (add) | (add) | (add) | ||
| Vigor | VS-10A * | Hobby |
6.0V 166.6 oz-in12.00 kg-cm1.2 N-m 4.8V 138.9 oz-in10.00 kg-cm1.0 N-m |
6.0V 0.19 s/60°315.8 deg/s52.6 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.47 oz70.0 g | 1.94×1.00×1.69 in 49.3×25.4×42.9 mm | — | Large | (add) | Brushed | (add) | Plastic | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | 800–2200 µs | 1500 µs | 5 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 250 mm9.84 in | (add) | 1.17–1.62 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Volz | Alu-Star * | Hobby |
6.0V 135.0 oz-in9.72 kg-cm1.0 N-m 4.8V 110.0 oz-in7.92 kg-cm0.8 N-m |
6.0V 0.20 s/60°300.0 deg/s50.0 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.50 oz70.9 g | 1.61×0.78×1.77 in 40.9×19.8×45.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.92–1.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Volz | DA 20-06-2503 * | Hobby | 6.0V 679.7 oz-in48.94 kg-cm4.8 N-m | 6.0V 0.12 s/60°500.0 deg/s83.3 RPM | ≤3 A≤3000 mA | 2.90 oz82.2 g | 1.64×0.80×1.79 in 41.7×20.3×45.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 5–6 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 240 mm9.45 in | (add) | 10.47 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 20-06-2505 * | Hobby | 6.0V 396.5 oz-in28.55 kg-cm2.8 N-m | 6.0V 0.19 s/60°315.8 deg/s52.6 RPM | ≤2.3 A≤2300 mA | 2.90 oz82.2 g | 1.64×0.80×1.79 in 41.7×20.3×45.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 5–8 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 240 mm9.45 in | (add) | 3.86 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 20-12-2515 * | Hobby | 12.0V 226.6 oz-in16.31 kg-cm1.6 N-m | 12.0V 0.29 s/60°206.9 deg/s34.5 RPM | ≤0.8 A≤800 mA | 2.90 oz82.2 g | 1.64×0.80×1.79 in 41.7×20.3×45.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 10–16 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 240 mm9.45 in | (add) | 1.44 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 20-30-2515 * | Hobby | 30.0V 495.6 oz-in35.69 kg-cm3.5 N-m | 30.0V 0.12 s/60°500.0 deg/s83.3 RPM | ≤0.6 A≤600 mA | 2.90 oz82.2 g | 1.64×0.80×1.79 in 41.7×20.3×45.5 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 800–2200 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 240 mm9.45 in | (add) | 7.64 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 22-06-2603 * | Hobby | 6.0V 679.7 oz-in48.94 kg-cm4.8 N-m | 6.0V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | (add) | (add) | (add) | Metal | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 10.47 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Volz | DA 22-06-2605 * | Hobby | 6.0V 396.5 oz-in28.55 kg-cm2.8 N-m | 6.0V 0.19 s/60°315.8 deg/s52.6 RPM | (add) | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | (add) | (add) | (add) | Metal | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.86 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Volz | DA 22-06-4106 * | Hobby | 6.0V 679.7 oz-in48.94 kg-cm4.8 N-m | 6.0V 0.33 s/60°181.8 deg/s30.3 RPM | (add) | 4.66 oz132.1 g | 1.64×0.87×2.60 in 41.7×22.1×66.0 mm | — | Large | (add) | (add) | (add) | Metal | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.81 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Volz | DA 22-12-2615 * | Hobby | 12.0V 226.6 oz-in16.31 kg-cm1.6 N-m | 12.0V 0.29 s/60°206.9 deg/s34.5 RPM | ≤0.8 A≤800 mA | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 10–16 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | 1.44 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.100 A100 mA | — | — | |||
| Volz | DA 22-12-4112 * | Hobby | 12.0V 495.6 oz-in35.69 kg-cm3.5 N-m | 12.0V 0.24 s/60°250.0 deg/s41.7 RPM | ≤1.7 A≤1700 mA | 4.66 oz132.1 g | 1.64×0.87×2.60 in 41.7×22.1×66.0 mm | — | Large | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 10–16 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | 3.82 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.100 A100 mA | — | — | |||
| Volz | DA 22-30-2615 * | Hobby | 30.0V 495.6 oz-in35.69 kg-cm3.5 N-m | 30.0V 0.12 s/60°500.0 deg/s83.3 RPM | ≤0.3 A≤300 mA | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | 7.64 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 22-30-2630 * | Hobby | 30.0V 283.2 oz-in20.39 kg-cm2.0 N-m | 30.0V 0.25 s/60°240.0 deg/s40.0 RPM | ≤0.3 A≤300 mA | 3.70 oz104.9 g | 1.63×0.87×1.98 in 41.4×22.1×50.3 mm | — | Large | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | 2.09 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 22-30-4128 * | Hobby | 30.0V 495.6 oz-in35.69 kg-cm3.5 N-m | 30.0V 0.33 s/60°181.8 deg/s30.3 RPM | ≤0.6 A≤600 mA | 4.66 oz132.1 g | 1.64×0.87×2.60 in 41.7×22.1×66.0 mm | — | Large | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 1000–2000 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | 2.78 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.010 A10 mA | — | — | |||
| Volz | DA 22-SUB-30-4128 * | Hobby | 30.0V 495.6 oz-in35.69 kg-cm3.5 N-m | 30.0V 0.33 s/60°181.8 deg/s30.3 RPM | ≤0.6 A≤600 mA | 15.17 oz430.1 g | (add) | — | Unknown | (add) | Brushed | (add) | Metal | (add) | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 20–30 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | (add) | (add) | 2.78 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.040 A40 mA | — | — | |||
| Volz | DA 26-30-5024 * | Hobby | 30.0V 708.0 oz-in50.98 kg-cm5.0 N-m | 30.0V 0.23 s/60°260.9 deg/s43.5 RPM | ≤1.3 A≤1300 mA | 8.40 oz238.1 g | 2.10×1.00×4.00 in 53.3×25.4×101.6 mm | — | Giant | (add) | Brushless | (add) | Metal | (add) | 6 | Digital | (add) | 90° | (add) | (add) | 900–2100 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 12–32 V | (add) | (add) | -30–70°C-22.0–158.0°F | (add) | (add) | (add) | (add) | (add) | 5.69 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 0.040 A40 mA | — | — | ||
| Waveshare | CF35-12 | Robotics | 12.0V 486.1 oz-in35.00 kg-cm3.4 N-m | 12.0V 0.22 s/60°270.3 deg/s45.0 RPM | ≤2.8 A≤2800 mA | 2.47 oz70.0 g | (add) | (add) | Standard | Aluminum | Brushed | (add) | Metal | (add) | (add) | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 9–12.6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | 4,096 p/r | 345.000 | 38.4 Kbps–1 Mbps | (add) | (add) | (add) | Position,Velocity,Step | (add) | Multi-turn | 150.000 A150,000 mA | (add) | (add) | ||
| Waveshare | DDSM115 | Robotics | 18.0V 283.2 oz-in20.39 kg-cm2.0 N-m | 18.0V 0.30 s/60°200.0 deg/s33.3 RPM | ≤2.7 A≤2700 mA | 26.98 oz765.0 g | 2.58×—×— in65.5×—×— mm | 100.7 mm3.96 in | Custom | (add) | Brushless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | Yes | 12–24 V | (add) | (add) | -20–45°C-4.0–113.0°F | IP54 | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 4,096 p/r | (add) | 115.2 Kbps | (add) | (add) | (add) | Position,Velocity,Current | (add) | Continuous | 250.000 A250,000 mA | (add) | (add) | ||
| Waveshare | DDSM210 | Robotics | 14.4V 120.4 oz-in8.67 kg-cm0.8 N-m | 14.4V 0.60 s/60°100.0 deg/s16.7 RPM | ≤3 A≤3000 mA | 9.17 oz260.0 g | 0.97×—×— in24.5×—×— mm | 74.5 mm2.93 in | Custom | (add) | Brushless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 11–22 V | (add) | (add) | -25–45°C-13.0–113.0°F | (add) | (add) | (add) | 250 mm9.84 in | (add) | — | Cylindrical | (add) | 4,096 p/r | (add) | 115.2 Kbps | (add) | (add) | (add) | Position,Velocity,Current | (add) | Continuous | 150.000 A150,000 mA | (add) | (add) | ||
| Waveshare | DDSM315 | Robotics | 18.0V 155.8 oz-in11.22 kg-cm1.1 N-m | 18.0V 0.19 s/60°315.8 deg/s52.6 RPM | ≤3.5 A≤3500 mA | 12.31 oz349.0 g | 1.57×—×— in39.8×—×— mm | 78.2 mm3.08 in | Custom | (add) | Brushless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | Yes | 12–24 V | (add) | (add) | -20–45°C-4.0–113.0°F | IP54 | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 4,096 p/r | (add) | (add) | (add) | (add) | (add) | Position,Velocity,Current | (add) | Continuous | 300.000 A300,000 mA | (add) | (add) | ||
| Waveshare | DDSM400 | Robotics | 25.2V 42.5 oz-in3.06 kg-cm0.3 N-m | 25.2V 0.60 s/60°100.0 deg/s16.7 RPM | ≤1 A≤1000 mA | 8.32 oz236.0 g | 0.97×—×— in24.5×—×— mm | 74.5 mm2.93 in | Custom | (add) | Brushless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | TTL | Yes | 9–28 V | (add) | (add) | -5–40°C23.0–104.0°F | IP54 | (add) | (add) | (add) | (add) | — | Cylindrical | (add) | 4,096 p/r | (add) | 38.4 Kbps | (add) | (add) | (add) | Position,Velocity,Current | (add) | Continuous | 250.000 A250,000 mA | (add) | (add) | ||
| Waveshare | RSBL120-24 | Robotics | 24.0V 1,666.5 oz-in120.00 kg-cm11.8 N-m | 24.0V 0.20 s/60°300.0 deg/s50.0 RPM | ≤4 A≤4000 mA | 17.11 oz485.0 g | 3.07×1.69×2.58 in 78.0×43.0×65.5 mm | (add) | Giant | Aluminum | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | Magnetic Encoder | RS-485 | Yes | 9–24 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | — | Boxed | (add) | 4,096 p/r | 232.000 | 38.4 Kbps–1 Mbps | (add) | (add) | (add) | Position, Velocity, Step | (add) | Multi-turn | 200.000 A200,000 mA | (add) | (add) | ||
Make: Unitree
Stall Current: 40–64.665 A40000–64665 mA
Shaft Power: —
Weight: 61.38 oz1,740.0 g
Size Class: Custom
Diameter: 116.0 mm4.57 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: 1000 Hz
Angle Sensor: Absolute Encoder
Control System: CAN / RS485
Programmable: Yes
Op. Voltage: 36–64 V
Power Source: External
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: IP68
Certification: CE
Connector: (add)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: 20.0 mm
Resolution: 32,768 p/r
Gear Ratio: 16.000
Baud Rate: 4.8 Mbps
Output Power: 500.0 W
Radial Load: 1,000.0 N
MCU: STM32
Operating Modes: Position, Velocity, Torque, Stiffness, Damping
Make: Unitree
Stall Current: ≤40 A≤40000 mA
Shaft Power: —
Weight: 18.70 oz530.0 g
Size Class: Custom
Diameter: 96.5 mm3.80 in
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 6000 Hz
Angle Sensor: Absolute Encoder
Control System: RS485
Programmable: Yes
Op. Voltage: 12–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–40°C23.0–104.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 6.330
Baud Rate: 4 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque, Impedance
Make: Unitree
Stall Current: ≤40 A≤40000 mA
Shaft Power: —
Weight: 18.87 oz535.0 g
Size Class: Custom
Diameter: 65.0 mm2.56 in
Dimensions: (add)
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: FET
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: Absolute Encoder
Control System: CAN / RS485
Programmable: Yes
Op. Voltage: 24–75 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–90°C-4.0–194.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 32,768 p/r
Gear Ratio: 12.660
Baud Rate: 4 Mbps–6 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Torque
Make: Vigor
Stall Current: (add)
Shaft Power: 1.17–1.62 W
Weight: 2.47 oz70.0 g
Size Class: Large
Diameter: —
Dimensions: 1.94×1.00×1.69 in 49.3×25.4×42.9 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 5 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 0.92–1.25 W
Weight: 2.50 oz70.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.78×1.77 in 40.9×19.8×45.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤3 A≤3000 mA
Shaft Power: 10.47 W
Weight: 2.90 oz82.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.80×1.79 in 41.7×20.3×45.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: 3.86 W
Weight: 2.90 oz82.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.80×1.79 in 41.7×20.3×45.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.8 A≤800 mA
Shaft Power: 1.44 W
Weight: 2.90 oz82.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.80×1.79 in 41.7×20.3×45.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 10–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.6 A≤600 mA
Shaft Power: 7.64 W
Weight: 2.90 oz82.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.64×0.80×1.79 in 41.7×20.3×45.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 240 mm9.45 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 10.47 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 3.86 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: (add)
Shaft Power: 3.81 W
Weight: 4.66 oz132.1 g
Size Class: Large
Diameter: —
Dimensions: 1.64×0.87×2.60 in 41.7×22.1×66.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.8 A≤800 mA
Shaft Power: 1.44 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 10–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤1.7 A≤1700 mA
Shaft Power: 3.82 W
Weight: 4.66 oz132.1 g
Size Class: Large
Diameter: —
Dimensions: 1.64×0.87×2.60 in 41.7×22.1×66.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 10–16 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.3 A≤300 mA
Shaft Power: 7.64 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.3 A≤300 mA
Shaft Power: 2.09 W
Weight: 3.70 oz104.9 g
Size Class: Large
Diameter: —
Dimensions: 1.63×0.87×1.98 in 41.4×22.1×50.3 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.6 A≤600 mA
Shaft Power: 2.78 W
Weight: 4.66 oz132.1 g
Size Class: Large
Diameter: —
Dimensions: 1.64×0.87×2.60 in 41.7×22.1×66.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤0.6 A≤600 mA
Shaft Power: 2.78 W
Weight: 15.17 oz430.1 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 20–30 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Volz
Stall Current: ≤1.3 A≤1300 mA
Shaft Power: 5.69 W
Weight: 8.40 oz238.1 g
Size Class: Giant
Diameter: —
Dimensions: 2.10×1.00×4.00 in 53.3×25.4×101.6 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 90°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 12–32 V
Power Source: (add)
Regulator Type: (add)
Temperature: -30–70°C-22.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Waveshare
Stall Current: ≤2.8 A≤2800 mA
Shaft Power: —
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: (add)
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 9–12.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: 345.000
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position,Velocity,Step
Make: Waveshare
Stall Current: ≤2.7 A≤2700 mA
Shaft Power: —
Weight: 26.98 oz765.0 g
Size Class: Custom
Diameter: 100.7 mm3.96 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 12–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–45°C-4.0–113.0°F
Water Rating: IP54
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: —
Baud Rate: 115.2 Kbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position,Velocity,Current
Make: Waveshare
Stall Current: ≤3 A≤3000 mA
Shaft Power: —
Weight: 9.17 oz260.0 g
Size Class: Custom
Diameter: 74.5 mm2.93 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 11–22 V
Power Source: (add)
Regulator Type: (add)
Temperature: -25–45°C-13.0–113.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: —
Baud Rate: 115.2 Kbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position,Velocity,Current
Make: Waveshare
Stall Current: ≤3.5 A≤3500 mA
Shaft Power: —
Weight: 12.31 oz349.0 g
Size Class: Custom
Diameter: 78.2 mm3.08 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 12–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–45°C-4.0–113.0°F
Water Rating: IP54
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position,Velocity,Current
Make: Waveshare
Stall Current: ≤1 A≤1000 mA
Shaft Power: —
Weight: 8.32 oz236.0 g
Size Class: Custom
Diameter: 74.5 mm2.93 in
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: TTL
Programmable: Yes
Op. Voltage: 9–28 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–40°C23.0–104.0°F
Water Rating: IP54
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Cylindrical
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: —
Baud Rate: 38.4 Kbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position,Velocity,Current
Make: Waveshare
Stall Current: ≤4 A≤4000 mA
Shaft Power: —
Weight: 17.11 oz485.0 g
Size Class: Giant
Diameter: —
Dimensions: 3.07×1.69×2.58 in 78.0×43.0×65.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Magnetic Encoder
Control System: RS-485
Programmable: Yes
Op. Voltage: 9–24 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: 4,096 p/r
Gear Ratio: 232.000
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Step
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.