Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hyperion | DS20-FMD * | Hobby |
6.0V 227.8 oz-in16.40 kg-cm1.6 N-m 4.8V 194.4 oz-in14.00 kg-cm1.4 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 1.87 oz53.0 g | 1.57×0.77×1.49 in 39.9×19.6×37.8 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 140° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.11–3.24 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hyperion | DS20-UMD * | Hobby |
6.0V 326.4 oz-in23.50 kg-cm2.3 N-m 4.8V 290.2 oz-in20.90 kg-cm2.0 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
(add) | 1.87 oz53.0 g | 1.57×0.77×1.49 in 39.9×19.6×37.8 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 140° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | (add) | 2.33–3.35 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Hyperion | DS20x-SMD * | Hobby |
6.0V 222.2 oz-in16.00 kg-cm1.6 N-m 4.8V 194.4 oz-in14.00 kg-cm1.4 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
1.5–2 A1500–2000 mA | 1.85 oz52.5 g | 1.57×0.77×1.44 in 39.9×19.6×36.6 mm | — | Standard | Plastic | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | Clockwise | 90° | 140 | (add) | (add) | 1500 µs | 2 µs | (add) | (add) | PWM | Yes | 3.5–7.8 V | (add) | (add) | -20–60°C-4.0–140.0°F | (add) | (add) | Futaba J | (add) | (add) | 2.77–3.74 W | — | — | — | — | — | — | — | — | — | 0.300 A @ 6.0V300 mA @ 6.0V | (add) | 0.007 A7 mA | — | 2.5-5V | ||
| Hyperion | DS20x-TMD * | Hobby |
6.0V 263.9 oz-in19.00 kg-cm1.9 N-m 4.8V 222.2 oz-in16.00 kg-cm1.6 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 1.85 oz52.5 g | 1.57×0.77×1.44 in 39.9×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 140° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57–3.75 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INJORA | INJS020HV | Hobby |
7.4V 278.0 oz-in20.02 kg-cm2.0 N-m 6.0V 225.0 oz-in16.20 kg-cm1.6 N-m |
7.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.05 oz58.0 g | 1.59×0.79×1.59 in 40.4×20.1×40.4 mm | — | Standard | (add) | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.20–5.14 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INJORA | INJS025 | Robotics |
6.0V 347.0 oz-in24.99 kg-cm2.5 N-m 4.8V 347.0 oz-in24.99 kg-cm2.5 N-m |
(add) | (add) | 2.01 oz57.0 g | 1.59×0.79×1.59 in 40.4×20.1×40.4 mm | (add) | Standard | (add) | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | 270 | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 260 mm10.24 in | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| INJORA | INJS030HV | Hobby |
7.4V 417.0 oz-in30.03 kg-cm2.9 N-m 6.0V 337.0 oz-in24.27 kg-cm2.4 N-m |
7.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.79×1.59 in 40.4×20.1×40.4 mm | — | Standard | (add) | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | (add) | 3.67–5.14 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INJORA | INJS035 | Robotics | (add) | (add) | (add) | 2.12 oz60.0 g | 1.59×0.79×1.59 in 40.4×20.1×40.4 mm | (add) | Standard | (add) | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 260 mm10.24 in | (add) | — | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| INJORA | INJS035-360 | Hobby |
6.0V 486.0 oz-in35.00 kg-cm3.4 N-m 4.8V 403.0 oz-in29.02 kg-cm2.8 N-m |
6.0V 0.98 s/60°61.2 deg/s10.2 RPM 4.8V 1.22 s/60°49.2 deg/s8.2 RPM |
(add) | 2.12 oz60.0 g | 1.59×0.79×1.59 in 40.4×20.1×40.4 mm | — | Standard | (add) | Cored | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | (add) | 0.61–0.92 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INJORA | INJS075 | Hobby |
8.4V 1,042.0 oz-in75.03 kg-cm7.4 N-m 6.0V 844.0 oz-in60.77 kg-cm6.0 N-m |
8.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 7.05 oz200.0 g | 2.59×1.18×2.24 in 65.8×30.0×56.9 mm | — | Giant | (add) | Cored | (add) | Metal | 15 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | (add) | 50 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 260 mm10.24 in | (add) | 8.21–12.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INJORA | INJS135 | Robotics |
7.4V 486.0 oz-in35.00 kg-cm3.4 N-m 6.0V 417.0 oz-in30.03 kg-cm2.9 N-m |
7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.33 oz66.0 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | (add) | Standard | Aluminum | Coreless | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 270° | 270 | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 260 mm10.24 in | (add) | 5.51–8.17 W | Boxed | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | ||
| INJORA | INJS235 | Hobby |
8.4V 486.0 oz-in35.00 kg-cm3.4 N-m 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.47 oz70.0 g | 1.59×0.79×1.48 in 40.4×20.1×37.6 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | (add) | 330 Hz | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 300 mm11.81 in | (add) | 6.42–12.84 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D750MG * | Hobby |
6.0V 215.3 oz-in15.50 kg-cm1.5 N-m 4.8V 170.8 oz-in12.30 kg-cm1.2 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.78 oz50.5 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–3.32 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D751MG * | Hobby |
6.0V 215.3 oz-in15.50 kg-cm1.5 N-m 4.8V 170.8 oz-in12.30 kg-cm1.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.90 oz53.8 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–3.62 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D760MG * | Hobby |
6.0V 161.1 oz-in11.60 kg-cm1.1 N-m 4.8V 136.1 oz-in9.80 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.84 oz52.3 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.29–3.31 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D761MG * | Hobby |
6.0V 161.1 oz-in11.60 kg-cm1.1 N-m 4.8V 136.1 oz-in9.80 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.90 oz53.8 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.29–3.31 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | DS3120MG | Hobby | 6.0V 277.8 oz-in20.00 kg-cm2.0 N-m | 6.0V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 2.12 oz60.0 g | 1.58×0.79×1.59 in 40.0×20.0×40.5 mm | — | Standard | Metal | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 320 mm12.60 in | China | 3.21 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | MG946R | Hobby | 4.8V 145.9 oz-in10.50 kg-cm1.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.46 in 40.9×20.1×37.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.35 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | MG996R | Hobby | 4.8V 130.6 oz-in9.40 kg-cm0.9 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.46 in 40.9×20.1×37.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | China | 1.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| J&T Bearing | 450.06 | Hobby |
8.4V 458.0 oz-in32.98 kg-cm3.2 N-m 7.4V 417.0 oz-in30.03 kg-cm2.9 N-m 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.07 s/60°882.4 deg/s147.1 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.28 oz64.5 g | (add) | — | Unknown | (add) | Brushless | (add) | Stainless Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | (add) | USA | 9.64–12.45 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| J&T Bearing | 600.08 | Hobby |
8.4V 600.0 oz-in43.20 kg-cm4.2 N-m 7.4V 542.0 oz-in39.03 kg-cm3.8 N-m 6.0V 472.0 oz-in33.99 kg-cm3.3 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.93 oz83.0 g | (add) | — | Unknown | (add) | Brushless | (add) | Stainless Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | -15–70°C5.0–158.0°F | IP67 | (add) | (add) | (add) | USA | 8.73–13.87 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | 9413 * | Hobby | 6.0V 130.5 oz-in9.40 kg-cm0.9 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.98 oz56.0 g | 1.61×0.79×1.50 in 40.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.86 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | Mega * | Hobby | 4.8V 277.7 oz-in20.00 kg-cm2.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 4.52 oz128.0 g | 2.60×1.18×2.26 in 66.0×30.0×57.4 mm | — | Giant | (add) | (add) | (add) | Plastic | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | S-9150 | Hobby | 6.0V 11.7 oz-in0.84 kg-cm0.1 N-m | 6.0V 0.09 s/60°666.7 deg/s111.1 RPM | (add) | 4.23 oz120.0 g | (add) | — | Unknown | (add) | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | Germany | 0.24 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | ST1318 | Hobby |
6.0V 57.0 oz-in4.10 kg-cm0.4 N-m 4.8V 44.5 oz-in3.20 kg-cm0.3 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.23 s/60°260.9 deg/s43.5 RPM |
≤900 A≤900000 mA | 1.94 oz55.0 g | 1.59×0.80×1.59 in 40.5×20.2×40.3 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | (add) | Germany | 0.36–0.62 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Hyperion
Stall Current: (add)
Shaft Power: 2.11–3.24 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.49 in 39.9×19.6×37.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 140°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hyperion
Stall Current: (add)
Shaft Power: 2.33–3.35 W
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.49 in 39.9×19.6×37.8 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 140°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hyperion
Stall Current: 1.5–2 A1500–2000 mA
Shaft Power: 2.77–3.74 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.44 in 39.9×19.6×36.6 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: Clockwise
Op. Range: 90°
Mech. Limit: 140
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 3.5–7.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Hyperion
Stall Current: (add)
Shaft Power: 2.57–3.75 W
Weight: 1.85 oz52.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.77×1.44 in 39.9×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 140°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: 3.20–5.14 W
Weight: 2.05 oz58.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.59 in 40.4×20.1×40.4 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: —
Weight: 2.01 oz57.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.59 in 40.4×20.1×40.4 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 270
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: 3.67–5.14 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.59 in 40.4×20.1×40.4 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.59 in 40.4×20.1×40.4 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: 0.61–0.92 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.59 in 40.4×20.1×40.4 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: 8.21–12.84 W
Weight: 7.05 oz200.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.59×1.18×2.24 in 65.8×30.0×56.9 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: 5.51–8.17 W
Weight: 2.33 oz66.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 270°
Mech. Limit: 270
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 260 mm10.24 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INJORA
Stall Current: (add)
Shaft Power: 6.42–12.84 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.1×37.6 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.26–3.32 W
Weight: 1.78 oz50.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.26–3.62 W
Weight: 1.90 oz53.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.29–3.31 W
Weight: 1.84 oz52.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.29–3.31 W
Weight: 1.90 oz53.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 3.21 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.59 in 40.0×20.0×40.5 mm
Case Material: Metal
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 320 mm12.60 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 1.35 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.46 in 40.9×20.1×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 1.42 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.46 in 40.9×20.1×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: J&T Bearing
Stall Current: (add)
Shaft Power: 9.64–12.45 W
Weight: 2.28 oz64.5 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: J&T Bearing
Stall Current: (add)
Shaft Power: 8.73–13.87 W
Weight: 2.93 oz83.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: IP67
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: (add)
Shaft Power: 1.86 W
Weight: 1.98 oz56.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: (add)
Shaft Power: 2.57 W
Weight: 4.52 oz128.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.60×1.18×2.26 in 66.0×30.0×57.4 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: (add)
Shaft Power: 0.24 W
Weight: 4.23 oz120.0 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Germany
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: ≤900 A≤900000 mA
Shaft Power: 0.36–0.62 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.59 in 40.5×20.2×40.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: (add)
Country of Origin: Germany
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.